Alright, who's got the .STL file?

my buddy is at 300 hours no valve check

My OCD kicked in seeing all that mud close to an open engine

What year is your bike? Curious about the clutch kits from Recluse! Thanks

In my experience BACK BLEEDING is the ultimate method to save time, money and sanity while getting optimum performance. Still shocked how many veterans do it the old school marathon way with gravity bleed.

Don't bother. Shite

It pops the choke off when you turn the throttle in the opposite direction so spin it forward instead of back

This video save about 5 "wtf?!" moments.

is this trail still open?

How thick are these? I have a pair of 6.0 knee guards and love them so logically I want to try the equivalent elbow guards. but I’m looking for something not too bulky it’s hard to get an idea of how big they are with no under jersey look.

The page is down, are these no longer available?

I don't let nobody work on my stuff, because most people don't have a clue, like even people that know their shit and they know what they're doing, they still don't have a clue, I would definitely let you work on my stuff, just for the fact that you recognized and also had a simple solution to prevent something that really wouldn't even matter, I'm speaking of how you put the shop towel on clutch tool, most professionals and unprofessionals wouldn't even recognize that being an issue or anything to be concerned about, but me, I would be so I would do the same thing you did, so I must say , you have an eye , a brain, and most importantly you have a clue, like I said, most people and even most professionals don't have a damn clue, good video and nice work

beautiful Whats the wind speed?

What brand of bash plate is that, cant find anything for an 06 exc

You're running into issues with external power because all power banks have an auto-off feature when the load is low, i.e. when the Gopro disconnects from power accidentally. You can force the power bank to always stay on even when it is disconnected from what it is charging with a 'keep power bank alive' mod. This will allow quick capture to work all the time with external power because the GoPro will always be powered.

Tubeless 😂 THERE'S A TUBE INSIDE LOOK AT MTB THERE'S NO TUBE

do you use the batt of the gp while it's on the pwoerbank or u can remove the batt while on ? thanks guys!

I can't find x-frame velcro straps. Please, where did you get yours? How much. Do you know if anyone makes an aftermarket non-velcro connector like you find on some helmets. Sorry, lot of questions.😊

Damn, looked like.a tough day.

you need a head light upgrade

Isn’t the stock swingarm good enough?

I have a batterypack with solar panel and a hand turn generator.

I was YouTubing this yesterday for my Ninja so I guess that's why your short popped ip in my feed. But yes lol, sounds like my bike in 5th & 6th

Good video, i will add that the anti rattle plates and clips inside the caliper need attention paid to them tou didn't explain what they do or where they are located in the caliper and what thier function is, if the clips and anti rattle plates are too loose the pads knock around in service

Very helpful, quality video. Just so some of you know, the small KTM bike I'm working on actually has typical threads on the crankshaft end bolt, not left-handed threads.

hi, just in any case what brand of double sided tape do you recommend for replacement?

Damn that's crazy, wouldn't have considered getting hurt like that, seemed pretty tame, didn't realise your bike hit you until you said

9:45:00

What year is it?

Fajna maszyna👍

Im so torn on whether i should go HCM or CRM... Any thoughts after a year?

Didn't learn anything from that

is this adjustable for small hands? thanks :)

Why not just put it on the visor?

I'm going back to stock for my 450 excf 2017, to much drag after few ride. Beginning was fantastic, but clutch plate worn much quickly.

I was told their are 2 versions for the Big Bear ride,, an easier and a harder route.. I am hoping this is the harder route.

this is a completely fabricated problem not only that it makes the bike sound like its going to explode. makes you wonder if they did this on purpose. my 1984 atc 350X damper springs still work as good as the day they where installed. this is such bs its not even funny. completely unnecessary.

are your company still runing？

Hey, I just purchased a 2024 ktm xc-w. When I push in the cold start button, let it idle for a minute, then blip the throttle the cold start button doesn't pop back out. I have to manually pull it back out. Is that normal?

This is one of many great videos by you guys, and I'm also a big fan of busting out parts on a 3D printer for everything. However, I have a very mundane question, which is certainly not worth you while replying to, but I'll ask anyway. You mention you're using feeler gauges with thin end, and a thicker base to measure the range. I've spent days searching on Amazon and all through the usual suspects on ThumperTalk and ADV etc, and I cannot of the life of me find out where to get a set. Tapered gauged just get me ones with a tapered shape, NOT a tapered thickness. Where do you get these magical gauges from? Cheers.

Does this carb work on Suzuki 650dr?

Do you know which front you were running, I think there is a normal and a hard (as well as the soft). Part numbers are M1744800 and 2477600 for 90/90-21. I think the latter is newer. I found them both in one shop and the 600 is definitely a harder rubber/stiffer carcass. Soft is a different tyre again. Thanks for any help.

Do you also not clean the air filter?

What do you exc owners think about the close gap from 4th to 5th,and the long gap from 5th to 6th? 2017+ model years.

This is exactly what my bike is doing!!! Ooo im soo hoping this does the trick how do i go about messing with the red screw can i go all the way in then back out some and go from there?? Wich way makes idle higher and lower clockwise speaking lol

Wait who is wrong here... Hard compound tires are for softer terrain and softer compound fot harder terrain right? Thats what comes up if you google it and also on metzeler website.

Solid video man. Super informative, but also not as dry as most rebuild videos. Really appreciate the content!

I'm sold 24 yz250x is getting smarter...

I'm interested to install this on my bike, but the main reason is because I messed up my left hand working in construction... my ring finger was amputated and my middle finger was reattached at the hospital. I hit all four fingers with a skill saw, I'm really lucky today that I'm still able of clutching the bike. But I can't ride it because, the clutch is too stiff and it hurts my hand. That's why I'm looking for alternative options of upgrading the clutch lever. Please let me know if you have more information on how to do so. I would really appreciate it.

Have you sold many of these? They really look terrible if there isn't a go pro on them. My helmet is on the way in the mail, but I don't think I could put that mount on it and spoil the looks of such an expensive lid...