Пікірлер
@willekfkdl7276
@willekfkdl7276 2 ай бұрын
What is throttle stroke
@sefferrr
@sefferrr 2 ай бұрын
Wow nice you even gave the gmades the advantage when you floored during the pull test ahaha not the best testing i see
@ST1VO
@ST1VO 3 ай бұрын
Useless esc's, even with the programming card... Got mine working the best I could, still not much punch, then it'd keep slowing down as too hot (2s and 6.5t in 2wd buggy) then it stopped working alltogether.... just get a quicrun 120 g2 for £35
@janimaatta9889
@janimaatta9889 3 ай бұрын
Onko sulla mikä kattoteline tässä? Istuu hyvin.
@philRminiatures
@philRminiatures 4 ай бұрын
SUperb dioram, great attention to detail on the base...
@willshobbytime
@willshobbytime 4 ай бұрын
Thanks for the nice comments Phil. I have to say that I liked doing the rugged forest terrain. In retrospect, I can say that the base should have been layered even more, especially on the edges of brown terrain and green moss. But otherwise I'm quite happy and the 1/72 scale seems to be quite forgiving, especially for trees. Thanks for watching :)
@chrisdomeier4985
@chrisdomeier4985 4 ай бұрын
What option does stop the cogging?
@philRminiatures
@philRminiatures 5 ай бұрын
Very nicely done, great job!
@willshobbytime
@willshobbytime 5 ай бұрын
Thanks for the nice comments and for watching🙂
@ReneeCorsaro
@ReneeCorsaro 6 ай бұрын
- I spent many, many days/eves. working on my (GS02F) Blazer style body, only to have it "do the exact same," paint-flaking, off of the 0.040" inch [ body thickness ]. Plus, my 1st run, my body split by the head-light area, cuz I (during body-prep), slipped with the razor-blade, cutting the lowest part of the "front" of this body !! 🙄 Be very careful people, when cutting-out your Lexan bodies !!!! 👌
@ReneeCorsaro
@ReneeCorsaro 6 ай бұрын
- Well done "prep & paint video" !!! ...I love my Gmade (GS02F), it is THE BEST "forward weight-bias" RC Crawler available, besides the NEW Vanquish "VRD STANCE" !!!! ...I think the VRD "might" take/beat my GS02F, which is an ongoing customized rig !!! - I swear by this specific Gmade !! It will climb a flat board of (64°) incline, "up" my carpet-ed ramp !!! ...No other brand has been able to accomplish this on KZbin, that I have seen. 👍✌️ - Thx for the vid
@goforitpainting
@goforitpainting 6 ай бұрын
Cool diorama 👍
@willshobbytime
@willshobbytime 6 ай бұрын
Thanks for watching😊
@guustvandijck9390
@guustvandijck9390 6 ай бұрын
Awesome! What saw are you using?
@willshobbytime
@willshobbytime 6 ай бұрын
Thanks :D In the beginning i use hotwire cutter PROXXON Thermocut 230/E
@philRminiatures
@philRminiatures 6 ай бұрын
Superb winter atmosphere!
@willshobbytime
@willshobbytime 6 ай бұрын
Thank you🙂
@cerisekappes580
@cerisekappes580 7 ай бұрын
Beautifully crafted 😊
@willshobbytime
@willshobbytime 7 ай бұрын
Thank you for the nice comment😊
@cerisekappes580
@cerisekappes580 7 ай бұрын
@@willshobbytime you are very welcome 😊
@PaulSchryer
@PaulSchryer 7 ай бұрын
...Not "a Jeep"... 🙄 - Gotta love the badass Gmade (GS02F) though. 💯
@PaulSchryer
@PaulSchryer 7 ай бұрын
**"Proof is in the Muddin' !!!!"** 🤘😜👌 - "Does anyone else see how fkn amazing this Gmade (GS02F) "IS"...!!!!?? 💯 🤔 ...Way better in looks & performance, than the TRX4, or all Vanquish rigs, except now, maybe the VRD Carbon... ...will hold its own against this... ..."overly under-rated"... Bad A$$ highly efficient forward bias crawler/scale-truck...🤔 ...And ir doesn't matter "what any-one thinks," cuz it is a proven FACT. - I'm a witness"for sure". I own this version, and there is "No Denying It". 💯🔥 - Most out of the box capable, no fkn lies. 👍
@Theonetruemason
@Theonetruemason 7 ай бұрын
looks great
@willshobbytime
@willshobbytime 7 ай бұрын
Thank you😊
@detlevwalter7495
@detlevwalter7495 7 ай бұрын
Great idea with the smoke and the fire. very well done. 👍😉
@willshobbytime
@willshobbytime 7 ай бұрын
Thank you😊
@elmarcentral
@elmarcentral 9 ай бұрын
Are you Finnish or Estonian?
@willshobbytime
@willshobbytime 9 ай бұрын
Finnish
@zoridor16
@zoridor16 9 ай бұрын
😮😮😮😮 amazing Kyosho machine❤❤ (easy to get spare parts and gears for this in 2024?) 😮
@willshobbytime
@willshobbytime 9 ай бұрын
Extremely difficult to get spareparts these days😔
@zoridor16
@zoridor16 9 ай бұрын
@@willshobbytime maybe in ebay :) (fazer mk2 many compatible pieces)
@simonrimes3567
@simonrimes3567 9 ай бұрын
Hey mate any special tips for hooking up the esc programming card ? Mine just strobes
@willshobbytime
@willshobbytime 9 ай бұрын
Sorry mate i have no idea. Hope you get that problem sorted out!
@Felix-gv3su
@Felix-gv3su 8 ай бұрын
have you got a reason for the problem? Because i have the same with both of my escs and Programm cards@@willshobbytime
@ryanareed30
@ryanareed30 5 күн бұрын
Power it off and back on. If it still doesn't then they aren't compatible
@Celina_books
@Celina_books 9 ай бұрын
Fajna plaża
@Adubbs87
@Adubbs87 9 ай бұрын
Awesome video Brother! I’ve been in the hobby for a long time but I’ve never got into crawling. Would you be able to recommend me like a good budget trail truck/crawler 1/10 scale?
@willshobbytime
@willshobbytime 9 ай бұрын
Unfortunately, I have no experience with budget class crawlers other than WPL and a one other chinese manufacturer, and honestly, I can't recommend them to others. Axial and Gmade have not disappointed. straight out of the box both are great trail crawlers. Gmade a little lighter works a bit better on rocks (axial is bit more top heavy and heavier overall)
@Adubbs87
@Adubbs87 9 ай бұрын
What battery does it run up to?? 4s?6s? Have you ran 6s successfully? Or 4s?
@willshobbytime
@willshobbytime 9 ай бұрын
I've only driven 3s and it's capable up to 4s
@Adubbs87
@Adubbs87 9 ай бұрын
@@willshobbytime nice. Have you had any issues with it?
@TheSphongleface
@TheSphongleface 7 ай бұрын
I have the exact same thing and it says 2S only.
@darrenpaterson6792
@darrenpaterson6792 9 ай бұрын
this is cool mate, you've inspired me to make a 3d printed one similar. 😀
@willshobbytime
@willshobbytime 9 ай бұрын
That's awesone idea mate😀and thanks for watching!
@lgdesigners8035
@lgdesigners8035 9 ай бұрын
I think it looks better with the blur effect, especially in those photos with the room lights off :)
@lgdesigners8035
@lgdesigners8035 9 ай бұрын
Nice diorama! I love the concept, and the execution! I haven’t made any dioramas yet, but I want to , do you have any recommendations for a good starter project? I don’t have a 3D printer or I would make one like this!
@willshobbytime
@willshobbytime 9 ай бұрын
Good question, unfortunately I can't really advise on a specific starting diorama. But if you're interested in sci-fi, I'd recommend researching the Star Wars theme, there's a lot of material ready for that topic, for example Star Wars Legion figure sets that can be really fun to paint. You can make a nice battle diorama with them. I hope this helped little and thanks for watching and commenting 🙂
@lgdesigners8035
@lgdesigners8035 9 ай бұрын
That helps, thank you!
@chrisbaztird
@chrisbaztird 10 ай бұрын
That's pretty impressive, unfortunately I do not have a 3d printer and don't know of anywhere that could print it for me.
@stralegaming2597
@stralegaming2597 10 ай бұрын
A small detail you could add is smoke behind the helicopter bending down, because of how much the blades push it, very nice work
@willshobbytime
@willshobbytime 10 ай бұрын
That's a good suggestion, thanks for liking and commenting kindly :)
@ramkaer
@ramkaer Жыл бұрын
That came out amazing. Nice job, thanks for sharing. 👍
@willshobbytime
@willshobbytime Жыл бұрын
Thank you for watching and your kind comment!
@연장잡이
@연장잡이 Жыл бұрын
Very nice body 🙏🙏🙏 Your hand. Magic👍👍👍
@willshobbytime
@willshobbytime Жыл бұрын
Thank you! it was hard work, but that's usually the case. Thank you for watching!
@RCGaryCrawlerTVOsmogomio
@RCGaryCrawlerTVOsmogomio Жыл бұрын
*GREAT* gmade 🇷.🇨
@willshobbytime
@willshobbytime Жыл бұрын
Thanks, it's good condition now. Thank you for watching!
@dragosbogoi
@dragosbogoi Жыл бұрын
Nice build! Is it faster in the real world than the 1 motor equivalent (apart from the increased torque)? Thank you.
@willshobbytime
@willshobbytime Жыл бұрын
Increased speed is very marginal, i think. But with speed gears it good climber, keeps up high wheel speed👍👍 Thanks for checking my vid!!
@troypostie1252
@troypostie1252 Жыл бұрын
Wow! Magic stuff dude! I'd pay a good price for that trans😮🎉🎉
@willshobbytime
@willshobbytime Жыл бұрын
If you or your buddy have 3d printer the file is in sale on cults. Thanks for checking my vid! Much appreciated!!
@mountainmikefabs8143
@mountainmikefabs8143 Жыл бұрын
Sweet !!
@willshobbytime
@willshobbytime Жыл бұрын
Thank you!
@rcgeneration824
@rcgeneration824 Жыл бұрын
Thing of beauty! I've had mine for over a year, and I absolutely love everything about it. I just can't get over how quiet it is! I can't Wait to buy the pick up truck version.
@willshobbytime
@willshobbytime Жыл бұрын
it's one of my favorites. Quiet and not very heavy, makes it perform well in my opinion. Thanks for commenting and checking my vid!
@souledoutrc8174
@souledoutrc8174 Жыл бұрын
Nice 👍
@연장잡이
@연장잡이 Жыл бұрын
Nice 👍 👍 👍
@GatzillaPlay
@GatzillaPlay Жыл бұрын
Very entertaining 👍👍👍
@willshobbytime
@willshobbytime Жыл бұрын
Thank you for watching! Glad you liked🙏
@연장잡이
@연장잡이 Жыл бұрын
After crossing a nice bridge. I'll use the rope to escape It's a lot of situational🙏🙏🙏 I saw it well done 👌👍😎😍
@willshobbytime
@willshobbytime Жыл бұрын
It was fun to make indeed😁 Thank you for watching and commenting!!
@PrizelTatzeRC
@PrizelTatzeRC Жыл бұрын
very nice car and trail!
@willshobbytime
@willshobbytime Жыл бұрын
Thank you for watching! It is nice to hear you liked my vid🙏
@manta1121
@manta1121 Жыл бұрын
Nice video❗✨The log crossing at the beginning is very thrilling! But it can also be fun. 👍😊
@willshobbytime
@willshobbytime Жыл бұрын
It was fun and thrilling indeed😁 Actually one of the jeeps slipped in to mud. I had only short hiking boots and waters was knee deep so..😂
@manta1121
@manta1121 Жыл бұрын
@@willshobbytime 😅😅😅
@nathanaelgreene9840
@nathanaelgreene9840 Жыл бұрын
Just like it’s full-sized companion
@Nick--rw1zx
@Nick--rw1zx Жыл бұрын
It's ok with a Trx 4 scale 1:10
@manta1121
@manta1121 Жыл бұрын
Nice video❗✨The sense of presence is wonderful!👍
@willshobbytime
@willshobbytime Жыл бұрын
Thank you! Did you surprised trx4m performance?
@manta1121
@manta1121 Жыл бұрын
@@willshobbytime What a surprise! The driving performance is astounding for an RC crawler of this size.😱👍✨
@SKULL0fD3ATH.
@SKULL0fD3ATH. Жыл бұрын
Get Better tires for your Comanche or MJ for short (not a Cherokee FYI) plus the mini is going to be lighter so it's not gonna sink as much.
@willshobbytime
@willshobbytime Жыл бұрын
It is Comanche, i've been done Cherokee vids straight over year so accidentally put cherokee in it, noticed now. Thanks for correction and checking my vid! Much appreciated!!
@연장잡이
@연장잡이 Жыл бұрын
Wow! You ran a difficult mud drive Bronco m. He's good at driving in a cute way 👌👏👏👍👍
@willshobbytime
@willshobbytime Жыл бұрын
I think this was too easy course for Trx4m😁
@CAPRAQUEENRC
@CAPRAQUEENRC Жыл бұрын
I love this, finally someone else that thinks outside conventional RC standards ❤
@willshobbytime
@willshobbytime Жыл бұрын
Hey that's nice to hear:) The plan is to make more DIY vids on channel, it's really fun aspect of the RC hobby
@연장잡이
@연장잡이 Жыл бұрын
You drove with nice cars🙏🙏🙏 Hot summer is coming here Watching the video makes me feel cool Thank you for the fun music and video 👌👍😎😍
@willshobbytime
@willshobbytime Жыл бұрын
Enjoy the hot summer friend! We got cold start for summer (no snow though)😁 Thank you for watching this!
@연장잡이
@연장잡이 Жыл бұрын
@@willshobbytime Thank you very much, my friend
@rcplaytime
@rcplaytime Жыл бұрын
Love this 😀 brilliant off roading, brilliant trucks 😀😀👍👍
@willshobbytime
@willshobbytime Жыл бұрын
Thanks mate!! I'm glad you like it😁