Do these things (UPS) make your electric bill go up?
@CoryWCordell15 күн бұрын
@@MelvinRodriguezxTNGx the battery does charge so there is some extra electricity used but is a minuscule amount. You shouldn’t notice an increase in your power usage.
@charlenecedillo289918 күн бұрын
Thank you so much! God bless
@user-th8sz1wu3o2 ай бұрын
Is this compatible with generator power.
@mattspazmatic3 ай бұрын
I have a few questions, if someone can help, I'd greatly appreciate it. Because a bunch of my most expensive gear is now glitchy from dirty power. I'm trying to protect a computer, and music equipment. 1. Does simply plugging drum machines/synths into the battery backup outlets protect from brown outs and blackouts? 2. If I don't have a land line I want to protect, do I even need to bother with the ethernet cable? (I still have a desktop to protect) 3. Said desktop is old.... it runs recording software and that's it. It's only on when I'm making music, but I still need protection from brown outs etc. Do I still need the USB cable to communicate with the computer? (I have no USB ports to spare) If a black out ever happened while it was on, I'd be there to save and shut down.
@joshsimmons36333 ай бұрын
Thank you great video
@JaxCopper4 ай бұрын
Thank you so much. My saw has been out of square for so long. Took about 5 minutes to square it up. So easy. Thanks!!!
@erylblas53344 ай бұрын
What is the size of lens cover in mm?
@ewgschool-vq2ql4 ай бұрын
makes sense nice
@ewgschool-vq2ql4 ай бұрын
wait this is the same example from my textbook lol
@Positive__E475 ай бұрын
My rigid miter saw won’t rotate. Any ideas why. It was working fine and than starting to get tight and now won’t move at all
@CoryWCordell5 ай бұрын
The turntable may have debris inside. Also ensure that any locks are disengaged.
@bduff50045 ай бұрын
10 years later and still a good tutorial. Thanks
@appliancechrisinstallation74955 ай бұрын
My son and I just built a PC out of spare parts I've collected over the years, i decided I'd see if I could finally get my old 9590 going stable and just before purchasing a new mobo and Ryzen processor I found this video and answered all my problems. Thank you, I battled this thing for years and never found a viable solution until now.
@SonNeko6 ай бұрын
Thank you that was very informative!
@fmelliotts67518 ай бұрын
I've owned this saw for about 15 years and noticed recently, my cuts are off. I've put off squaring because I've lost my manual. Thanks for making this simple video and now I'm making good cuts.
@FadedDaWolfgaming8 ай бұрын
Omg thank you so much, i got one cause we have power outages a lot and was really confused reading online
@StrokaReviews10 ай бұрын
Thanks, Cory 🫡.
@shopbreezyvibes176410 ай бұрын
THANK YOU!!! this saved me
@aleksandarbjelosevic56210 ай бұрын
Shele 310 bear
@willparsons32 Жыл бұрын
When connecting the provided usb cable to the to the MacBook or Mac desktop computer (or Windows PC) will it automatically download or provide the software to the computer in order to check the UPS's status, etc...?
@daytonpyro Жыл бұрын
Unable to communicate with UPS
@Benakuzo211 ай бұрын
Superb quality throughout, easy to assemble. I found the saw to be highly accurate and a delight to use (I am a homeowner using this saw for various projects). I attached the saw to a folding mobile stand to save space and that works great kzbin.infoUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe as well. However, you have to be sure the saw is securely locking in position before collapsing the stand. I've had many of the brands over the years and have come to point where I only buy Bosch, the extra money is a small price to pay for the quality and ease of use. Treat yourself to the best.
@achardjc Жыл бұрын
I have the same saw and need to do this. Thanks for the tips. I was not aware of those three screws that held the rail down. Thanks.
@DustBucketlive Жыл бұрын
Bravo! 👏
@AlKidd Жыл бұрын
OK. So, does the computer port play a role in sending data to the Cyber Power UPS, or does the computer usb port only receive communication from the Cyber Power UPS? Or is there bidirectional communication that occurs (?) when and if the Cyber Power software installed on the computer needs to make adjustment in the functionality of the Cyber Power UPS--or can it not do so?
@CoryWCordell Жыл бұрын
My assumption is that the USB cable allows the UPS software to monitor and communicate with the UPS. This may be used for firmware updates as well.
@doffiemcdoffles Жыл бұрын
Didn't realize that the provided usb cable was used to connect my computer to the unit. Must have skipped over it after reading all the safety instructions. Thank you for the tutorial.
@Yo-oo6kl Жыл бұрын
hero!! the turbo core is the problem... thanks!!!
@Jeff-rk8hq Жыл бұрын
Thanks for taking the time to teach an important lesson to folks getting started on squaring a miter saw…As people we tend to take knowledge we hold or that’s common in our lives for granted as common sense when in reality, the knowledge we acquire will always differ according to the path you’re on, so common sense to a roofer or logger is not common sense to a house mom or a firefighter and vice versa. That’s why some of the most basic instructional videos have so many millions of views because what’s common to one of us likely isn’t as common to everyone else. So we all have something we can teach others. So thanks to everyone doing their part spreading useful information to help others
@boomcity4942 Жыл бұрын
Just adjusted my saw. Thanks for the video!
@Seplechura Жыл бұрын
great video. Quick question. What is the point of connecting the UPS to the computer? and what is the point of passing an internet cable through the UPS to the computer?
@CoryWCordell Жыл бұрын
The computer to UPS USB will allow the power supply and the computer to communicate. It isn’t required for the UPS to do it’s job however. The UPS also serves as surge protection. Any line coming into the computer could have a surge, such as lightning.
@RADECLOCK Жыл бұрын
I just tried the method and I'm in the testing phase, but for now everything is perfect, good video
@film-masti-777 Жыл бұрын
voice is too low.
@chuckroberts2929 Жыл бұрын
Hey great video can you demo how to use the compound miter features on this saw please i need help
@CoryWCordell Жыл бұрын
Im glad you liked the video. I don’t believe I currently have time to produce a video. Possibly in the future. There a a lot of resources out there, so I’m confident you can did what you need. Best of luck to you and God bless!
@samsammy9578 Жыл бұрын
Perfect one!
@jaredtrachtenberg3443 Жыл бұрын
Thanks so much for saving me 20 min digging through the manual for some of these adjustment part locations…I don’t have the same model but close enough that I figured out exactly what I needed!
@reneeverett2277 Жыл бұрын
Thank you Corey, very good video!
@Anonymous-jx8zy Жыл бұрын
👍The best video on how to install a toilet seat.
@dimitardimitrov9781 Жыл бұрын
The best vid on the subject (and mitre brand)! Sincere thanks!
@foxehhinson3180 Жыл бұрын
LIFE SAVER! This worked for me 100%. I was given a 9590 as a hand me down upgrade for my 8350. Slapped it in and it kept crashing on boot. This worked.
@Yeps31 Жыл бұрын
Thanks bud. This is easier than I thought. I didn't know I could adjust the guide and I have a tiny angle on my cuts. I've been making my cuts, flipping the board and shaving off another mm or less to even things out.
@gvet47 Жыл бұрын
When I did pan lube years ago they sold cutters based on the caliber you had. Just pressed it over the bullets and you kept doing it as they pushed out the top. Then I just went to an RCBS lube sizer and was way faster.
@notstormi5796 Жыл бұрын
stupid question but can i just plug it into the wall and then use a surge bar to plug into UPS or will it cause issues
@zrohit Жыл бұрын
Can I use a usb-Ethernet connector to connect ups to network to use management software, thanks
@elliotappleby2201 Жыл бұрын
How big is the cover in mm?
@TheStrayHALOMAN Жыл бұрын
This cpu also has an issue of the voltage being way too high than is needed for it to run the full 5ghz, 1.381V is all you need plus your heat is going to cool down quite alot
@christiantolbert4141 Жыл бұрын
I thought you turned off the hot water first?
@CoryWCordell Жыл бұрын
Only the side that is to be replaced needs to be turned off.
@shatll1975 Жыл бұрын
Thank you a lot! Exact same problem I faced playing with this bedroom heater lol
@deandeann1541 Жыл бұрын
There is no need to flux before the lead is totally melted.