No pasa nada si le quitas el soporte del motor? O hay qur poner algo o que? Es que no explicas nada carnal solo lo haces
@econocarr13 күн бұрын
disculpa si cuanto se quita un soporte hay que soportarlo de otra manera, yo uso un gato y un canto de madera para levantar el motor y quitarle peso a soporte sino no podre sacarlo.
@AlanmauricioDomínguez14 күн бұрын
No afecta nada si le quitas el soporte del motor ? Ese que le quitas tu o hay que poner algo
@econocarr13 күн бұрын
si hay que soportarlo con un gato o algo similr usando madera para contactarmotor por debajo.
@VictorNoelCoryPaz19 күн бұрын
You encouraged me to do the same and clean my IAC valve on my Tercel 😅. Gonna follow your steps. Btw, is it in your plans to change the timing belt and water pump, maybe? 😅😅. Anyway, thanks for your educational videos!
@econocarr19 күн бұрын
@@VictorNoelCoryPaz I already did the timing belt and water pump really old video from last year.
@VictorNoelCoryPaz19 күн бұрын
@@econocarr I sure missed it, gonna look for it. Thanks again!
@VictorNoelCoryPaz22 күн бұрын
That's cool. Where did you get that bar? And are the benefits of using it noticeable?
@econocarr21 күн бұрын
@@VictorNoelCoryPaz I got it of the street for a steel. It help the cars on curves better handling.
@nhjojola22 күн бұрын
I was so ready to take the entire intake manifold for this job. Never even considered this possible. Badass video, thanks man!
@jhooneermendez6250Ай бұрын
Cuál es el código del filtro mi bro?
@econocarrАй бұрын
@@jhooneermendez6250 s2808 STP El filtro de aceite.
@VictorNoelCoryPazАй бұрын
One question, if it is not too much to ask. Is it possible to bypass the AC pulley? What I mean is if I can use a belt directly from the crankshaft pulley to the power steering pump pulley without the belt going through the AC pulley?
@econocarrАй бұрын
yes you can but the purpose of the pulley is to add tension to the belt. ford new cars have strechy belt with no pulleys.
@VictorNoelCoryPazАй бұрын
@@econocarr Thanks for your quick reply. Indeed, we need tension, this leads me to my other question: should I go to the store and see if there is a belt that fits (with enough tension) correctly between the crankshaft pulley and the power steering pulley?
@econocarrАй бұрын
@@VictorNoelCoryPaz mine did not have the power steering. If you want to try that out you can, the thing is to get the right size and tension to tight and it will snap, to loose it will make noise or fall off.
@VictorNoelCoryPazАй бұрын
@@econocarr Thanks man! I appreciate the time you took to answer my questions. Keep the great work 👍 I hope your channel gets the recognition it deserves. Maybe you can post videos in English and then Spanish so you will probably cover a wider demographic.
@VictorNoelCoryPazАй бұрын
Hey, you actually did it. You brought back the Tercel 🤤. Thanks, man!
@VictorNoelCoryPazАй бұрын
Your videos are very relaxing to watch.I hope we can see more content about your Tercel. Thanks for your effort! 👍
@econocarrАй бұрын
@@VictorNoelCoryPaz thank you let me see if my Nex video is about the Tercel.
@josefranciscoesquertalaman38272 ай бұрын
Presente en las aventuras de mecánica automotriz, cordial saludo desde Navojoa Sonora México
@josefranciscoesquertalaman38272 ай бұрын
*ME SUSCRIBO* En Navojoa Sonora México 🎉
@josefranciscoesquertalaman38272 ай бұрын
Presente en las aventuras de mecánica automotriz cordial saludo desde Navoyork Sonora México
@econocarr2 ай бұрын
Saludo
@LovinskyPierre-z3l2 ай бұрын
Hola! Quiero saber si no prende el ventilador eso significa que falta gas?
@econocarr2 ай бұрын
@@LovinskyPierre-z3l ose si sopla aire pero es caliente puede ser gas, puede ser compresor, un fusible, es difícil diagnosticar por internet. Si no sopla aire pues el abanico entonces.
@econocarr2 ай бұрын
@@LovinskyPierre-z3l puedes verificar si hay gas en el sistema con algo fino dándole a la válvula para ver si sale algo de gas.
@nenegrande85602 ай бұрын
Estas metiendo el gas con el aire del circuito,tienes que sacar el aire del circuito
@econocarr2 ай бұрын
@@nenegrande8560 El sistema estaba vacío. Por eso no hay peligro.
@inaki48122 ай бұрын
Tienes que poner boca abajo el bote
@VictorNoelCoryPaz3 ай бұрын
Thanks for sharing. Definitely, gonna be useful when I change my valve cover gaskets.
@ipaporod3 ай бұрын
La mariposa es la parte mas agüebada del machuqueo, despues de limpiarla el asuntito se rasputea muchisimo mejor😂.El que SABE SABE y el que no pos que aprenda!
@armandogonzalez34814 ай бұрын
ningun video de esos que he visto, nadie te dice la cantidad que hay que hecharle si son 50 o 60 psi.
@econocarr4 ай бұрын
bueno la cantidad lo dice cada carro cuantas oz echarle en el sticker amarillo. usualmente la maquina de aire es quien lo puede hacer correcto uno se deja llevar por las latas pero lo mas importante es la presion en el sistema que este entre 30 a 40 psi ahi es cuando enfria bien, pero tienes razon nadie indica eso solo dicen cuando sientas que enfrie el aire.
@armandogonzalez34813 ай бұрын
@@econocarr ok gracias.
@juanbarralaga87652 ай бұрын
Le falta escuela señor
@econocarr2 ай бұрын
@@juanbarralaga8765 a mi? Puede dar más detalle.
@Tuckerpm4 ай бұрын
Is the last moment of the video you realizing that cylinder one is at bottom dead center instead of top haha?
@econocarr4 ай бұрын
No I did that to make sure nothing moved. I made sure it was TDC before a dismantle it. With old Toyota engine 1 and 4 follow and 2 and 3 follow.
@andresMoEs5 ай бұрын
Nunca le. Cambias el aceite
@econocarr5 ай бұрын
el carro tiene 80 mil millas este el dueño no dio mucho detalle pero se nota que no le hizo los cambios de aceite a tiempo.
@andresMoEs5 ай бұрын
Que bueno eres para explicar 😅😅
@econocarr5 ай бұрын
si prefiero demostrar que hablar fue bastante fácil cambio la junta remover los tornillos 10mm de la junta y las bobinas.
@econocarr5 ай бұрын
ya subi la segunda parte para que vean el proceso terminado el procedimiento es similar en todos los carros. pero anadere mas comentario en videos futuros.
@JOSESANTIAGO-jb8ii5 ай бұрын
Si es verdad yo tengo un Toyota Tercel 1996 y son unos Tonka no te dejan a pie y las pieza de remplazo como frenos, discos y tren delantero son baratas y fácil de conseguir.
@JOSESANTIAGO-jb8ii5 ай бұрын
Puede hacer un video como cambiar el filtro de gasolina pegado al fire walk del motor Toyota Tercel 1996
@@econocarr ok 👌 lo voy a cambiar el sábado es fácil y podría hacer otro de sensor de oxígeno el que está frente al radiador y abanico de enfriamiento Tercel 1996
@econocarr5 ай бұрын
@@JOSESANTIAGO-jb8ii si te tira codigo p0171 te diria cambiar el sensor de oxigeno usualmente es una llave 17 mm para poder quitarlo aqui esta el de un lexus que hize kzbin.info/www/bejne/Zl6om3mQaL58e68
@econocarr5 ай бұрын
@@JOSESANTIAGO-jb8ii el sensor de que prende el abanico tambien lo hice esta en el codo donde va la manga del radiador pero no lo grave. tienes que ver cual es el que tu tiene pq hay differentes versiones de ese mismo el chano tiene las differencias kzbin.info/www/bejne/iISmnJ6Jp8Z3acU&t= kzbin.info?search_query=tercel+jose
@ericksonocampo355 ай бұрын
Tienes alguna red social?
@econocarr5 ай бұрын
Debería hacer una páginas de redes sociales.
@econocarr5 ай бұрын
instagram.com/econocarr2000/
@ericksonocampo355 ай бұрын
Así es amigo
@ericksonocampo356 ай бұрын
Excelente amigo
@ericksonocampo356 ай бұрын
Saludos desde Costa Rica
@ramonaflorentin16866 ай бұрын
El tercel y los corollas del 94/97...son de lo mejor de lo mejor de Toyota....son eternos...no te dejan jamás..dale con esa restauración que tendra una maquina lo vas a disfrutar sl máximo...y como bien dice el dicho...Toyota es Toyota....💪💪💪💞💞💞🇦🇷🇦🇷🇦🇷🧉👏👏👏
@angelisalive6 ай бұрын
Did you have problems at start up when I give it gas it like hesitates after putting new ones And when I put into drive it cut off my car like stalled out
@econocarr6 ай бұрын
In the video I put the key in 3 times "on position" to let it build up pressure than in runs normally on start. Same thing happened once to me when a reconnected fuel line without priming the system.
@angelisalive6 ай бұрын
@@econocarr I already started up my car and got gas but is it to late to do so I’m letting it idle for a while to break them in
@angelisalive6 ай бұрын
@@econocarr when I give it gas it hesitates a bit :/
@econocarr6 ай бұрын
@@angelisalive what car is it? Do you see gas leaking. Any misfire codes?
@econocarr6 ай бұрын
@@angelisalive hesitation on gas could be clogged up cat or low fuel pressure from gas pump.
@econocarr6 ай бұрын
kzbin.info/www/bejne/d4CplJiPitGlasU
@angelisalive6 ай бұрын
No leaks ?
@econocarr6 ай бұрын
yes from the o rings forgot to mention use grease when putting it back on to avoid the o ring from breaking. kzbin.info/www/bejne/d4CplJiPitGlasU
@econocarr6 ай бұрын
Or do you mean after the repair? Because it was a simple fix. Port injector are easy in old cars civic Toyota not like direct injection.
@quiles19578 ай бұрын
diantre mano tu no tienes espacio ahi y lo malo es que te eetas tragando todo ese toxico wao
@econocarr8 ай бұрын
aqunque aqui no se vea puede ver en mis otros videos siempre uso respirador.
@econocarr8 ай бұрын
me falta otra cámara para ensenarlo de otro ángulo
@franciscoamaya29458 ай бұрын
Pensé que ibas a enseñar el resultado final para ver cómo se veía y luego la comparación del color nuevo con el color que ya está en el carro bueno a lo mejor en otro video gracias por compartir
@econocarr8 ай бұрын
Claro si quieres hago una segunda parte.
@eladioramos96318 ай бұрын
Saludos soy también de puerto Rico..me intereso tu video ya que pienso comprar un corola como ese.!
@econocarr8 ай бұрын
Siempre llévalo a un mecánico que lo verifiquen cualquier carro que te interese comprar.
@richags3289 ай бұрын
great job on showing every step, really going to help me out on my 4runner...where did you purchase your timing chain kit?
@econocarr9 ай бұрын
I got it from my local parts store. Can't say that I used OEM.
@donjohnston7384 Жыл бұрын
'Promo sm' ☺️
@scubbarookie Жыл бұрын
Nice work! I just finished the motor mounts on my 99 3rd gen 4runner. I've got the V6; so, it was kind of a pain, because there was hardly any room! They were really worn out. Take care.
@SmolPlayzTV Жыл бұрын
👍
@subtegral Жыл бұрын
After removing the two bolts from the filter bracket (with extensions through the wheel well) remove the fuel lines from both ends from under the hood. Pull filter, bracket, and fuel lines out together. Replace filter on bracket and reinstall.
@econocarr Жыл бұрын
I think the 3.4 you could put extension in between the intake and remove bolts. mine only had one bolt for fuel filter. Next time i will do it the way you said because putting banjo bolt was almost impossible, I now know to remove the line from the rail and the bottom, and it would have been much easier. thanks.
@subtegral Жыл бұрын
@@econocarr extensions will reach the filter bracket bolt(s) through the wheel well on the 2.7L 3RZ-FE.
@evanharlow788 Жыл бұрын
where did you buy the new AC button ?
@econocarr Жыл бұрын
Brand new for Toyota A/C Switch Truck 4Runner RAV4 Push Button Hilux 1989-2000 www.ebay.com/itm/294677633490
@econocarr Жыл бұрын
they seem to be out of stock. make sure you find one compatible they sell different versions..