Paul Cotto

Пікірлер

@D25Studios 19 сағат бұрын

Great video! Will this work on the EBM version?

@paulcotto 18 сағат бұрын

I believe so , I don’t see any problems.

@joeteejoetee 6 күн бұрын

The Amiga computer caught my eye, and I enjoyed your work and video of the film!

@paulcotto 6 күн бұрын

Thanks! I built a new motherboard for the A2000 from a blank PCB.

@joeteejoetee 6 күн бұрын

@@paulcotto That is totally awesome!

@Silverhorse32 7 күн бұрын

Love to see the results of your scan.

@lmhggns 7 күн бұрын

You should release the cad models and how to build tutorial for this!

@grimlin667 12 күн бұрын

This is beyond amazing, do you have the files publicly available?

@grimlin667 12 күн бұрын

You have the best, and in many case only info on this stuff. If you don't mind I have a question I can't really find good answers for: Since Double Super 8 is 16mm film with the same size holes in it, just more, could you buy bulk 16mm and make a jig that just cuts the holes in yourself (obvious in a dark room etc.)? I found almost nothing on the subject on line. I went so far as to look up if you could laser cut the film with certain colored lasers that wont expose the film, but would prefer not to burn my house down.

@paulcotto 12 күн бұрын

I had a die for perforating film for DS8 cameras made 20 years ago and it cost me $7500. It would cost twice that these days. It is extremely precise work and happens under a microscope to make one. Unless you are an engineer and a tool and die maker you will never be able to make one.

@grimlin667 12 күн бұрын

@@paulcotto Do you know what the name of the die is called? I might have access to the equipment.

@paulcotto 12 күн бұрын

@@grimlin667 Its a perforating die, A company in Germany called Wittner Kinotek has all the needed equipment and they had a perforating machine rebuilt. They have videos on youtube if you search for them.

@paulcotto 12 күн бұрын

kzbin.info/www/bejne/e3qahJ6ip7ifhLcfeature=shared

@grimlin667 12 күн бұрын

Thanks, Google has failed me this far. Keep up the good work. It is gold!

@robertotascherio-vd7oz 15 күн бұрын

I have the 8/19/1.5 and a Bolex H8 Reflex. I do not have the holder, it is not easy to find one in Internet or maybe it is impossible. Also for me is there any way to buy the attachment you have made for my camera and then to send it to Italy ? Thank you very much for your help. Roberto Tascherio

@paulcotto 14 күн бұрын

I Can provide a digital model of the adapter that you can have printed from Aluminum or Plastic. You then could have a price from Craftcloud3D and have one made . Would you like the link for the file?

@paulcotto 14 күн бұрын

@@robertotascherio-vd7oz here is a link for the digital model. drive.google.com/file/d/1OQFKMUZ3cE9xlL28YenRqks7F6HV2Yem/view?usp=drivesdk

@robertotascherio-vd7oz 12 күн бұрын

@@paulcotto Thanks, Craftcloud3D will make one for me. But what about the two rops, where could I find them or is it possible to reproduce them ? Roberto

@paulcotto 11 күн бұрын

@@robertotascherio-vd7oz Here is a file for the 8mm rod adapters. You need 8mm linear rail rods off Amazon to complete them. The threads will likely need to be cleaned up after printing with a die. drive.google.com/drive/folders/16IAl6pw12EMZ3f5JBULP2nyKzRBC6yX7?usp=sharing

@robertotascherio-vd7oz 11 күн бұрын

@@paulcotto Thanks for the reply. One more question: are the two rods attached to the two bases with loctite? Or how?

@johnpaulurizar 15 күн бұрын

Hi Paul, thank you for the video, any chance for the wiring diagram? The link to file is not available? Cheers JP

@dantefekete7617 20 күн бұрын

I have the non reflex variant. I am wondering if I would be able to rotate the lens setup in and out of position from focus to film plane?

@paulcotto 20 күн бұрын

You could not with this system. It’s mounted to rods that prevent turret rotation. You could use a measuring tape for focus. You would frame with the door mounted auxiliary parallax viewfinder.

@paulcotto 22 күн бұрын

My K3 is super16 with a Crystal sync motor. The Sirui came with thread adapters that work with the meteor lens.

@AdriennRusz 22 күн бұрын

Hello, what modifications did your K3 get? Super 16 or Ultra 16? and what mount for the anamorphic adapter? Thanks very much!

@dantefekete7617 24 күн бұрын

Can this be used on the h16 non-reflex for critical focusing?

@paulcotto 24 күн бұрын

Sorry No.

@onmarginpictures Ай бұрын

Too much noise reduction. Doesn't look like film.

@Cihadata Ай бұрын

Someone please make this for Krasnogorsk 3😢

@infofotoart Ай бұрын

Hi there, i am very interested in this system. Do you know more about that Din cable? How many PIN? Thank you! 😊

@paulcotto Ай бұрын

I got all of the information from the Nizo Professional manual and the Visacustic manual. If you google them you will find the PDF files.

@paulcotto Ай бұрын

super8-welt.de/wp-content/uploads/downloads/bedienungsanleitungen/braun_visacustic_1000_sm.pdf

@infofotoart 27 күн бұрын

@@paulcotto Thank you! Very kind. :)

@infofotoart 27 күн бұрын

@@paulcotto If i understand well, it is important the recorder has the AV port...so it can be used just the Uher 4000, right? The 4200 and 4400 has not the AV...(or not ?)

@paulcotto 27 күн бұрын

@@infofotoart There are several recorders listed in the manual. Most have AV in their name because thay have a seperate head for recording the sync pulse from the camera.

@DhermawanDicky-hr8un Ай бұрын

It seems like it's not the original engine of the motorbike. If I may ask, what engine does the motorbike use?

@paulcotto Ай бұрын

Yes its as stated in the description. The final completed bike has the original motor.

@alexlandherr Ай бұрын

I wish this was a product as occasionally I find reasonably priced 16S models that works. Something like this would be dream for me as I don’t want camera that has no option for a 100 ft film load.

@ronaldtafoya3051 Ай бұрын

Very good job on diy development, very clean and very good transfer, how did u process, chem and tank and how did u do the transfer, all so like your amomorphic on your other videos.

@paulcotto Ай бұрын

Thanks 👍 I use a LOMO UPB1A tank with Cinestill Cs2 chemicals. I make my own remjet prebath and I final rinse in distilled water. I do get water spots and dirt after the film dries so I use automatic dirt removal in resolve studio 19 to digitally clean the images. I will make a video about my process so please subscribe to be sure not to miss it.

@neigborhoodbassdealer 2 ай бұрын

Are you selling any

@jw48335 2 ай бұрын

So, isn't the modern difficulty usually the frames falling out of sync with the sound, especially with the start/stop nature super 8? Doesn't this solve that? i.e. you can clap at the start, rip the audio to digital, and mate it to the video in post? Just ignore the sync channel?

@paulcotto 2 ай бұрын

Yes, if you have the ST1200 projector and the resolver you should have perfect sync. No clapper is required because the camera is driven my the recorder. The recorder rolls and then the camera rolls in sync. There were many attempts by camera companies to do this and ELMO got it to work. The down side these days is the lack of sound stripe service.

@pablocruzvillalba6302 2 ай бұрын

what adapter you use to connect the sirui to the camera? do you have some footage to show after scanning?

@paulcotto 2 ай бұрын

I use a thread adapter. Here is a film I shot recently on my H16EL kzbin.info/www/bejne/mX28ZHqQYtdgirc

@TheReelport 2 ай бұрын

Great work 👍 what is the exact camera model&lens? And how does the trigger exactly work? Everytime there is a change in the illumination?

@paulcotto 2 ай бұрын

Its a Blackfly-S Model BFS-U3-32S4C-C. The lens I use is a Switar 50mm non RX on about 6 inches of c-mount extension tubes. The trigger is a Optical Endstop Limit Light Control Switch that goes into a DC Solid State Relay. The relay goes to a special cable and acts as the switch to trigger the camera logic to take a frame picture.

@paulcotto 2 ай бұрын

I also use an LED array for a car dome light with a dimmer control and a white plastic diffuser.

@TheReelport 2 ай бұрын

Great, thanks! You simply moved the camera setup to the new projector right?

@photooooooo 2 ай бұрын

i could use an adaptor, i have been taking baltars and using the lens mount for vivitar series 1 lenes

@minhirig3dcamera840 2 ай бұрын

Impressive dynamics of the Vision3 200T.

@ObscureImages 2 ай бұрын

Very nice! It's pillared, so we're seeing the entire frame, correct? I was playing around with my 16M and an anamorphic adapter a couple of weeks ago but didn't shoot any film. These results look very promising. Was the Sirui cumbersome to use while shooting or more user-friendly? Thanks for sharing.

@paulcotto 2 ай бұрын

It’s 1.66 aspect ratio with a hard matte. I did crop slightly for stabilization. It works on all of my 16mm cameras so far. Focus is easy but you need to lock the focus of the taking lens at infinity.

@ObscureImages 2 ай бұрын

@@paulcotto Good to hear. I'll investigate the Sirui further. Gotta get my camera CLA'd first; started squeaking a bit the last I used it. Do you know a place that works on Scoopics by chance? Thanks again!

@paulcotto 2 ай бұрын

@@ObscureImages Duall camera does. Reasonable price for a complete overhaul. www.duallcamera.com/services/index.shtml

@jackross7830 2 ай бұрын

This is awesome! Do you or anyone else in these comments know of someone that makes new attachable motors to run a full reel? The original MCE-17B is hard to find and goes for a decent price.

@paulcotto 2 ай бұрын

Revolution motors sells a new motor for bolex cameras.

@jackross7830 2 ай бұрын

@@paulcotto Thank you! Looks awesome but it’s 1k!?!?

@paulcotto 2 ай бұрын

@@jackross7830 1080P but it fits the Bolex 10X viewfinder.

@TomDee-j7p 3 ай бұрын

What lense did you use? and what resolution did you scan it in?

@paulcotto 3 ай бұрын

It’s the Schneider zoom that came with the camera. I scan at 2.7 MP.

@DethronerX 3 ай бұрын

Its beautiful. If this was stabilized on post, it would look even more pro, because the rotations are a bit distracting me from your cinematography

@paulcotto 3 ай бұрын

Thanks! I only use translation when I stabilise in Resolve or it looks weird for some reason.

@jiriduda4070 3 ай бұрын

Ours czech Foma ☺

@cecildeville6950 3 ай бұрын

Beautiful, well done - Thanks

@S3tstore 3 ай бұрын

Which system did you find to have better quality, filming or photographing frame by frame? Thanks for inspiration

@paulcotto 3 ай бұрын

Frame by frame is better but it take much longer to capture the 100’ of film. The above system is in real time. I do all of mine frame by frame now.

@S3tstore 3 ай бұрын

Thanks Paul!

@ShimabukuFilms 4 ай бұрын

Please sell this as a service or parts

@IndianTinker 4 ай бұрын

Hey Paul, Looks great. How are you managing to make the motor run in this frame by frame mode?

@paulcotto 3 ай бұрын

The Athena projector was designed to run that way. From 1 to 12 fps and continuously at 18 and 24fps. Its an analyzer projector.

@CringePanda 4 ай бұрын

Hi Paul, my dad wants to ask you if you'd do some work on his camera. He says you fixed his Fujica ZC-1000 20 years ago. Are you still in business? Thank you!

@paulcotto 4 ай бұрын

Sorry, I don’t work on anybody’s cameras, but my own .

@CringePanda 4 ай бұрын

@@paulcotto "Well that's too bad. Chambless passed away and so did Bernie O'Doherty. The old guard is either retiring or gone from this Earth. Not a lot of trained professionals left to keep film alive." - dad

@ryan_wiik 4 ай бұрын

Very enterprising Paul! This seems like a fantastic alternative to the super 16 obstacle that many face out there. Bravo

@lunarfilmsroberthoullahan5041 4 ай бұрын

Really nice work!

@_def 4 ай бұрын

You should sell these parts 🤓 I have an h16 EBM would love some help converting.

@willemalexander8596 4 ай бұрын

Is there any way to also buy or get a sample of your attachment? Have the 8/19/1.5 but with the single rod. It seems it might fit the Ds8 or H8 with just the single rod instead of the two havent checked yet. (No bolex cam ) have an arriflex st going to sell that one to buy a bolex DS8

@paulcotto 4 ай бұрын

You need the pair of 8mm rods that thread into the 2 lens locations also. I would be happy to give you a copy of the file to 3D print the Moller mount. I use craftcloud3D to print hem in aluminum or steel. Here is a link to the file. Print it in milimeter scale. drive.google.com/file/d/1OQFKMUZ3cE9xlL28YenRqks7F6HV2Yem/view?usp=drive_link

@willemalexander8596 4 ай бұрын

@paulcotto amazing. Those rods are really hard to find. Wondering if als a 3D aluminium print would be some option… havent got any thing here to measure it at home and build a 3D model hut that is something amazing it it would be possible some day

@paulcotto 4 ай бұрын

I designed some but after printing in aluminum they needed to be rethreaded. That requires a machine shop. I would find 2 aluminum C mount body caps and drill the center to 8mm and buy 2, 8mm linear steel rails off Amazon. Then use led loctite to permanently cement them together.

@Lugo1993 4 ай бұрын

super nice setup ! which focus gear are you using for the Kern Vario Switar 12,5-100mm? I‘ve been looking to get some for my 16-100mm

@Lugo1993 4 ай бұрын

thanks paul, great work as always ! is this for R16 or S16?

@paulcotto 4 ай бұрын

Any square base Bolex H series.

@gamecube8885 5 ай бұрын

Yo, where did you get a Bolex H16 EL? I would love to get my hands on it.

@paulcotto 5 ай бұрын

I bought it in 1998 from Shutterbug Magazine.

@cecildeville6950 5 ай бұрын

Good job, definitely film and Vision 3 daylight is so beautiful. Thanks!

@acoustictie8907 5 ай бұрын

Best telecine ive seen!

@paulcotto 5 ай бұрын

Thanks!

@cornwestern1689 5 ай бұрын

Really fansinating project here, I'm looking forward to the next update of it. Can't wait to build a crystal motor for my Arri st

@onmarginpictures 5 ай бұрын

I really don't understand why you're not keeping the grain intact. That's the beauty of celluloid film: the Grain. Otherwise it just looks like a digital camera.

@1edgeman76 5 ай бұрын

@Paul Cotto - great footage. Do you know where the blueish coloration is coming from in the top of the frame?

@paulcotto 5 ай бұрын

I am not sure, possibly the hand processing is not perfect. I had to do a lot of corrections, and I am still learning resolve.

@ronaldtafoya3051 5 ай бұрын

I would like to see any footage u have used this on. TKU

@Sputnik1985 5 ай бұрын

May 2001 Akihabara and Shinjyuku

@ronaldtafoya3051 5 ай бұрын

what was the zoom lens setting or did u very it? Looks very good.

@paulcotto 5 ай бұрын

Various focal settings.

@TheCinematographyLab 5 ай бұрын

Great work Paul, your projects are always interesting.

@paulcotto 5 ай бұрын

Glad you like them!

Ең жақсы KZbin

Пікірлер