What size are the lips for the rears ? I have 19x10.5 7inch barrel , 3.5in lip , , I’m. Static aswell
@eetsdawg87164 күн бұрын
What’re the specs of the cerbs?
@Wayvess4 күн бұрын
@@eetsdawg8716 19x12 + 0 and 19x9.5 +35
@eetsdawg87163 күн бұрын
thanks appreciate it! Did you have to use spacers for the bbk in the front? Also just coils or you have upper control arms?
@Wayvess3 күн бұрын
@@eetsdawg8716 I'm having to run a 5mm in the rear and 25mm in the front. The front will clear with a 5mm spacer as well but I only had two. I've got Silvers coilovers with GKTech rear camber arms.
@eetsdawg87163 күн бұрын
@ I have Cerb 2 18x10 +13 18x11 +0 need a 25mm spacer in the front and have front control arms and bc coils and just test fitting the front they stick out so much idk if I can dial it in
@Wayvess3 күн бұрын
@@eetsdawg8716 Mine do stick out with the 25mm spacer but I can definitely use a smaller one to clear the brakes. I only have about -2.5 degrees of camber up front. Depending on how stanced you want to be I think you can make them fit.
@EthanplysfootballАй бұрын
Bro I just came back from Gatlinburg
@WayvessАй бұрын
It's a great vacation spot!
@EthanplysfootballАй бұрын
@ yes it really is
@sleepe361Ай бұрын
Nice ride brother. If you wanted the purple to pop more. You could've sprayed a metallic silver first then the purple over it then clear it off. But awesome job man.
@WayvessАй бұрын
@@sleepe361 thanks dude! I’ll try that out next time.
@tylerwright7422Ай бұрын
I WASN'T SUBBED
@WayvessАй бұрын
BRUH
@chiefcujo4756Ай бұрын
Did you take out the brake pins before painting?
@WayvessАй бұрын
Nope, just masked everything off!
@pedrodiasrossi8122Ай бұрын
pretty dope video!!
@WayvessАй бұрын
@@pedrodiasrossi8122 thank you so much!
@drubombomАй бұрын
Bro get to the point man plz u talk too much sorry
@WayvessАй бұрын
Not really trying to be a "how to" channel, I'm just casually filming myself work on my car. I'm sure there's better videos explaining the install you can find.
@noclout81452 ай бұрын
How does the difference in ride quality feel? Ive been debating silvers over bc coilovers for a few weeks but cant find anyone that would actually tell me.
@Wayvess2 ай бұрын
It's hard for me to directly compare them because I have higher spring rates on the Silver's making the the ride stiffer. I'd say the quality of the Silver's is just a little bit better but if you want to save any money, the BCs are a great choice and worked great.
@larrydorsey78582 ай бұрын
Looks awesome
@Wayvess2 ай бұрын
@@larrydorsey7858 thank you!
@samjacobs6242 ай бұрын
bae gettin stuff done
@Wayvess2 ай бұрын
@@samjacobs624 all day everyday
@Vinoisthename2 ай бұрын
That chemical guys vrp is pretty good. I use it as well my interior and it definitely protects it from sun damage lol
@Wayvess2 ай бұрын
@@Vinoisthename it really is! I swear it brought back my interior like crazy and it doesn’t look greasy at all.
@eetsdawg87162 ай бұрын
What’re the specs of the Cerbs?
@Wayvess2 ай бұрын
@@eetsdawg8716 I posted a video of me rebuilding them but, they are 19x9.5 + 35 / 19x12 + 0
@Xccord2 ай бұрын
Why not just rebuild the coilover instead of buying some new ones? They sell replacement shocks for abt $90 and u could buy the swift springs on the side too
@Wayvess2 ай бұрын
@@Xccord the set has a bout 60k ROUGH mileage on them. I didn’t really trust myself to rebuild them and I figured it was a matter of time before the others went.
@Xccord2 ай бұрын
@@Wayvess bro its super ez to do it hella vids on youtube just need to buy the new damper n reinstall with preload new boot n bump stop only 5$ thats the point of buying bcs so when parts break u can just rebuild the coilover
@Wayvess2 ай бұрын
@@Xccord yeah I’ve watched videos on it. It was just easier for me to get a fresh set with higher spring rates. If they had less mileage on them and one broke I probably would have went that route.
@Xccord2 ай бұрын
@@Wayvess valid
@harrisonlloyd66622 ай бұрын
This dude needs some more recognition 👌🏼 keep at it bro
@Wayvess2 ай бұрын
thank you so much!
@Vezatir2 ай бұрын
That’s the sexy car but dang the guy driving it sexier
@Wayvess2 ай бұрын
@@Vezatir oh stahp🥰
@Madem1si2 ай бұрын
Yessirrr
@Vezatir3 ай бұрын
that boy hitting da GRIND
@Wayvess3 ай бұрын
WE getting it done.
@kraken37933 ай бұрын
Came for the knob, stayed for the knobheads
@samjacobs6243 ай бұрын
Always gotta lay down some solid caulk
@Wayvess3 ай бұрын
If the caulk ain't right ion want it
@dannpd19553 ай бұрын
Why didnt y’all turn the steering wheel so you could get better access?
@Wayvess3 ай бұрын
@@dannpd1955 we didn’t need to. It was also taped down so we couldn’t really move it.
@ivanfacca89173 ай бұрын
Where did you found the v1 kit?
@Wayvess3 ай бұрын
@@ivanfacca8917 It is a V1 nismo that had a different body kit on when I bought it. I found the rear bumper off of an abandoned car and I bought the front end from nissanpartsdeal.com
@mengtselai38183 ай бұрын
nice video Kirk, doing this next to police car looks so funny.🤣🤣
@Wayvess3 ай бұрын
@@mengtselai3818 thanks! he’s a homie 😂
@annac87303 ай бұрын
so fire
@Wayvess3 ай бұрын
Indeed
@samjacobs6243 ай бұрын
the mommalones was infact on teeees
@Wayvess3 ай бұрын
@@samjacobs624 TEs BRO
@samjacobs6243 ай бұрын
pretty boi kirk
@Wayvess3 ай бұрын
@@samjacobs624 that’s you
@FrostyOnyxxx3 ай бұрын
Wheels vid!!!
@Wayvess4 ай бұрын
For anyone watching in the future, the fuel sending unit did not fix my problem. There is a second fuel reader on the fuel pump which I will attempt to replace. This may fix your gas gauge but in this case it did not fix mine.
@annac87304 ай бұрын
rip the wheels
@codydotmedia4 ай бұрын
Even after watching this, i still miss my Z. Good to see you got it all fixed up!!
@Wayvess4 ай бұрын
@@codydotmedia thanks dude! Plan to have Stoopihot video done by the end of the week
@LiKeFuNzi5 ай бұрын
where is weds for z?
@Wayvess5 ай бұрын
Coming very soon! Within the next week
@LiKeFuNzi5 ай бұрын
@@Wayvess nice
@codydotmedia6 ай бұрын
so ready to see what you do next. And ready for unconditional to take back off!!
@Wayvess6 ай бұрын
Yessir! We about to go hard!
@joshuasutton40436 ай бұрын
Nice ride bro love my 370z roadster
@Wayvess6 ай бұрын
Thank you man!
@joshuasutton40436 ай бұрын
Looks awesome dude love my 370z just need a super charger from soho Motorsport and I’ll be good and exhaust
@Wayvess6 ай бұрын
Thanks dude! Superchargers are great on these cars.
@z34Tommy7 ай бұрын
liked for the video, subbed for the tuna sandwich break
@Wayvess6 ай бұрын
Tuna sandwich hit different
@brycegunderson58387 ай бұрын
Hell of a video🤝
@berkodonat27957 ай бұрын
how much paint did you use to paint all 4 calipers? Is one can enough?
@Wayvess7 ай бұрын
I got 3 cans and used probably 2
@WSicario467 ай бұрын
where are the videos my friend
@Wayvess7 ай бұрын
Been busy getting married and buying a house! I’ve got a fresh video almost ready to come out though!
@chakradjuzeus92757 ай бұрын
Nice video! Sweet ride!!! I really that purple color 🔥 Thanks for the share and Keep it up!!!!!
@Wayvess7 ай бұрын
Thanks you!
@kevinponce3728 ай бұрын
so is this a q60 with a 370z exhaust ? wondering cause im debating on buying a exhausr
@Wayvess8 ай бұрын
Yes but it did not fit, he bought the correct one later
@easypro10 ай бұрын
Would it sound same on nismo and base?
@Wayvess10 ай бұрын
Yeah! Its pretty much the same engine
@Austzynn11 ай бұрын
did you order from Z1? sorry if this was mentioned in the video.
@Wayvess11 ай бұрын
I order the OEM bumper and OEM under shroud from Nissan parts websites. You can get a better price that way. The Z1 Under-shroud that goes under the oil pan was directly from Z1.
@uspaint11 ай бұрын
Dam that is clean! Beautiful z!
@Wayvess11 ай бұрын
Thank you!!
@omarspost11 ай бұрын
Heads up to those interested in using the VHT anodised spray. They do a specific silver base/ undercoat spray which really makes the anodised colour pop. It makes one hell of difference to the finish. Suitable for straight to metal and high temp. Make sure to buy this!
@Wayvess11 ай бұрын
Yeah! I found that out after. Color would have looked how I wanted if I used the correct primer
@jcardi17 Жыл бұрын
what size spacers did you get ?
@Wayvess Жыл бұрын
25mm Z1 Bolt-on spacers
@jcardi17 Жыл бұрын
@@Wayvess preciate it twin
@SvenTulfo Жыл бұрын
I don't get why people use primer when painting over the old paint. Primer is used for bare metals and surfaces that were not painted before. It is used to adhere on metal, wood or concrete. If you spray it on old paint it will be more detrimental.
@ksich81423 ай бұрын
Well the Dupli color metal cast paint is a 2 system product if your not painting bare metal . The base coat is not for adhesion purposes but for looks. The purple paint is transparent
@Von4L_ Жыл бұрын
Duraflex?
@Wayvess Жыл бұрын
OEM all the way around
@MW-uf4re Жыл бұрын
I know this video is older...just wondering were the rear coilovers set at the highest ride-height when you reviewed in the 2nd part of this video?
@Wayvess Жыл бұрын
I want to say I adjusted it up a little more but not much. They are currently maxed out with about two threads showing. If you go to my Instagram @oopz34 I have the most recent pictures on there of them at max height
@MW-uf4re Жыл бұрын
@@Wayvess awesome! Will do. Thank you!
@MixedbyDonovxn Жыл бұрын
Going for a v1 conversion on 2011 sport! I got the wheels and front bumper. Definitely the best looking OEM body kit out there!
@Wayvess Жыл бұрын
100% dude. don’t forget the side skirts, a lot of people do but they really pull it together
@MixedbyDonovxn Жыл бұрын
@@Wayvess I agree. Even now with just the front bumper, it looks great, but a little off because the front lip doesn’t connect with anything around the car.
@nasirnasir-lw3eb Жыл бұрын
Man you are amazing i really like the quality of your work and standards, ive been searching a purple paint to do my 2019 mustang gt ,found couple of wrap vinyl which seems low quality, now after seeing your video ill just do exactly like you , ❤❤❤❤❤
@Wayvess Жыл бұрын
Thanks dude! I'm sure it'll look great, it's all in the preparation!