Thank you I just got this kangoo and couldn’t see how to get it out ☘️☘️🇮🇪🇮🇪

I use alcohol based cleaner for plastics. Silicone remover on plastic makes it static and you will end up with some dust on it

Dziękuję za pomoc

Vart köpte du

When i turned my power steering left and right the level wouldn't go down with engine off. Then i started it , turned it left and right and it squirted out like a garden hose. 20 seconds till I shut engine off Then clamped/ attached the line and filled it . The level wouldn't go down.. Turning left and right the steering.level still full. Disconnect line and level won't go down when turning left and right while disconnected. do i start it again turn left and right?

Great job🎉🎉🎉

Can you see the backlight through the new button? Also, does the glue stick damage the old button lettering?

This way only last's a little while and it will come back soon. Best way is to sand them down and clear coat them. I have tried both on mine and clear coat is way better.

Nice! What’s the difference between the 2 buff pads in the last 2 steps?

Hi nice job, what clear coat did you use?

What size is the plug you used?

Где вы взяли веки?

Hallå gubben, var ifrån köpte du grillen, de fungerar inte med ”swedish site” är svensk jag hajar grejen, tvär kattig grill!

I need the bolt whats the name and/or how does it need to be?

How the hell? I know that Volvos don't rust😅

Without a clearcoat protection, it will haze in the week. All job will be wasted.

I am seriously considering this for my boring gray interior, but can you tell me how well this has held up? Especially on the swivel and clip parts?

I give this work 10/10

Jag bor också i Sverige. göteborgs stad. Hur kan jag köpa det? Tack

How did you put the cover back in place?

Is this same with the 2018 model ?

Hello, please do I have to remove the whole shift knob if I just want to renovate silver plastic part? Is it possible to just release this silver part?

Que tal saludos cuantos botes de aceite necesita para llenarlo yo quiero hacerle el cambio de aceite de dirección y purgar ya que cuando giro el volante se siente como algo forzado la bomba del power no hace ruido pero si giro suben las rpm pero si sigo manteniendo el volante girándolo caen un poco como si se atorara el power quiero hacerle el cambio haber si mejora

Sounds decent for a cheap exhaust

my stock exhaust sounded better than this

🐿 Thank you 💜

Oh! Hallo? Sveiki? 🙂Watched your air filter video to change mine. Beechnuts? Noticed those before all the Euro car names. LOL.

Killer camera setups and editing. Helpful if you know the steps even without subtitles or narration. Guessing. It looked like a mix of gasoline and acetone in the clear spray bottle? 🫣 ... 🙂💜

.i. too much b√ll$h1t

Thnx!

"sound" sorry

Really like your centre console. Where did you get this from. Thanks ps. Great video

Ty

Renault a mal placée le filtre à air

Wow, I’m amazed! Superb results 👍🏻

Great work but didn't get why you didn't paint and then attach.

No need to press brake pedal?

Looks good now, but unless you seal it with some sort of UV protectant clear coat like they have from the factory, that won't last a year. Once you do it once, you'll be doing it over and over and over again... That's the problem with headlight restoration. It is temporary at best.

check mine out.

What name of wheels??Please!

After spending all that on the equipment its worth buying a used headlight!

debil

Thank you I would of damaged surround with screwdriver had I not watched this first

Can you send me link for all kit i need to buy for this job to be done i don't have any tools

Thanks.

Would much rather have an explanation as you go through the motions than music.

what strut brace is this?

7 sanding steps? Just buy a 3M heavy duty restoration kit and get the same results in three steps!! Get the job done in half the time!!!😂🙄🤔🇬🇧👍

I was frustrated by how difficult it was to find out how much fluid to put in. The auto stores couldn't determine how much even with my VIN number, all the KZbin videos had different amounts to add, not even an internet search could give me one option. You know how I found out, there was a decal on the transmission itself that told me how much to add (90oz or 2.8L). But to be honest, once I added the exact amount, it was the exact amount that it will start overflowing out of the fill hole. So I don't even think you need to know exactly how much... Just fill it till it starts pouring out the fill hole.

Best one I've found yet. Thanks so much, I searched and searched and couldn't find the plugs, you saved the day!!