Nope. Like every RaspberryPi I’ve had, the micro sd that comes with is crap. Won’t even boot. I’ve never had a Pi project that just worked. This is no exception, unfortunately.
@simonsayshomeassistant6 күн бұрын
I just love your Studio !
@xmuninu6 күн бұрын
I returned my Beatbot Aquasense robot after a frustrating month using it. It did a terrible job of cleaning my pool as it just pumped most sand and fine debris out the back of the unit at high pressure making my pool murky. The basket filter only seemed to collect leaves and never sand or dust. Also, the so called 'intelligent mapping' didn't seem to work at all. It just went around randomly and would leave large areas totally uncleaned. Regarding the battery, it would only last about 90 minutes and then stop. I ended up buying the exact Polaris model you showed in the video (it's branded as Zodiac in Europe) and it is absolutely superior to the Beatbot in every sense and it's double basket filter collects even the finest sand and dust with ease. Maybe I was just unlucky with the Beatbot mapping and battery life and was sent a defective unit, but the Zodiac filter is way superior.
@scottcarter43887 күн бұрын
$199 setup $79 a camera... uuuhhhh your getting paid or you have too much money
@doubleslit95137 күн бұрын
Another great video 👍 One more and I may be tempted to hit the buy button on one of these packages. 📦 Live your office btw. Nice workmanship
@skibird77339 күн бұрын
Off the chart cool! I was playing with this 10 seconds after watching your vid.
@eranderi689112 күн бұрын
Where is the link to the Yamal file?
@yoyoTechKnows12 күн бұрын
There is a link to my discord server - you can find more details there - thanks for watching!
@eranderi689110 күн бұрын
@@yoyoTechKnows Hi, I'm on the discord server and I don't see the code for the video here, maybe you can send it to me
@zkosn13 күн бұрын
I have the sonoff temp gauge and it's offline most of the time. In both the smart life and tuya app you can't see anything, such as the history or last measurement, when it's offline. It also is locked to Celsius in the app (the hardware is F/C selectable and updates measurements relatively fast, but it's expensive when the smart isn't very smart.). I'm not sure if I'm missing something to make the device usable between zigbee updates.
@the_90s9213 күн бұрын
No video footage whatsoever, you had me in the first half but failed when the actual use of it wasn’t shown. This is like watching an ad for them 🤦♂️
@yoyoTechKnows12 күн бұрын
LOL - I would have to rewatch it - but I think there was some footage in there! Promise it was not an ad, I just think its a great system, and the cameras are only a small part of what makes it great! - I will try to add more footage in a future video - thanks for watching all the same!
@tortysoft14 күн бұрын
Please don't shout :-)
@yoyoTechKnows12 күн бұрын
LOL - I didn't realize I was - I will try to do better and thanks for watching!
@markeisharobinson643716 күн бұрын
What would you recommend for renters just looking for simple indoor surveillance to watch the kids/pet and a really good doorbell camera? Thanks!!
@yoyoTechKnows12 күн бұрын
In that case I might look at Google nest - only because they have a number of options and would be really easy to relocate if/when you move somewhere else! - thanks for watching!
@vikylin16 күн бұрын
Incredible job with this review! 🌟
@yoyoTechKnows12 күн бұрын
Thank you! I am glad you liked it, thanks for watching!
@Hari-lz2vj18 күн бұрын
nice thumbnail you got there
@yoyoTechKnows17 күн бұрын
Thank-you! :-) and thanks for watching and supporting the channel!
@Gumball36918 күн бұрын
I need one I think I’m slowly Dieng!!😂😢
@yoyoTechKnows18 күн бұрын
LOL - you need one core sure then - thanks for watching!
@yoyoTechKnows18 күн бұрын
Amazing how fast this detects, updates and helps you make sure your breathing quality air! Add Home Assistant and some automations to make sure your space is healthy!
@NoTengoIlusiones18 күн бұрын
Did you give up Openhab completely?
@yoyoTechKnows18 күн бұрын
Nope - I have it running still - to be honest I was not seeing much response to openHAB videos - I do have a “review” of the current version video in the works and will try to get it out soon! - thanks for watching!
@d-five726518 күн бұрын
The Biggest source of CO2 in your Office is not your MAC, it's YOU! I do IAQ test for my clients as part of the HVAC service and it is quiet shocking to see the CO2 levels increase with each person that enters an enclosed space. Inadequate ventilation is a common cause of fatigue and mood conflicts within the working environment - it can never be understated!
@yoyoTechKnows18 күн бұрын
I thought that too, and it does make a difference with me or more people in the room- but the levels rise fast even if I just turn it on and leave. And if I am not there all day and it’s on, you can see the rise and fall between HVAC cycles! - thanks for watching!
@qksilver12312 күн бұрын
@@yoyoTechKnows there is no physical way your Mac could produce CO2. the CO2 is from organisms doing cellular respiration or from fossil fuels/organic material burning/oxidizing.
@vegaswayne24718 күн бұрын
I don't think a computer would be a source of CO2 unless it was on fire. You are the source. Your body takes in O2 and releases CO2 when you breath.
@yoyoTechKnows18 күн бұрын
I thought that too, but it happens even with or without me in the office. Do a quick google for does a computer give off CO2. You see the graphs - 100% it’s my Mac. - anyway, thanks for watching!
@WillTheThrill23322 күн бұрын
I haven't gone through the comments, but can I access the cameras through a web site?
@yoyoTechKnows22 күн бұрын
Hello, yes - there are many ways to access the cameras including web site, app, dedicated monitor and i have them setup in Home Assistant as well which not only allows me to access them, but use them to trigger automations - for example when they detect motion, my lights turn on. Hope that answers your question - thanks for watching!
@TRUEFFEL32122 күн бұрын
Hi. Maybe can someone help me. I have HA Setup on a remote Server hosted by a friend of mine with the offical iso. The manual installation of HA core on ubuntu didnt worked somehow so it tried the iso. To be able to see my solar inverter and stuff I need to setup a VPN Connection to my fritzbox/lan. How do i configure this in HA? all the guides I have found are for when you want to connect to your HA remotely. but first i have to get the connection to my fritzbox and my local network.
@yoyoTechKnows22 күн бұрын
Not 100% sure how you are trying to set this up - but you would most likely need to use your network gear to create the VPN and create a route to allow access from your home assistant box. I don't think there is any easy way to do this with Home Assistant itself! Hope that helps - thanks for watching!
@TRUEFFEL32121 күн бұрын
@@yoyoTechKnows yes it helped. I thought there would be a easy way to Install a vpn Client all on the HA itself. I build a tunnel network vpn Interface on the Router for the VMs. Everything works now :)
@fernandomorales392023 күн бұрын
Thanks for the review. Very helpful. What kind of smart pergola do you have? I am looking at Hanso brand,
@yoyoTechKnows23 күн бұрын
The Pergola is not smart, I included the link in the description of the video if you want to see it directly, only the blinds are smart for now. That said, I am look at a way to add some automation to the pergola to be able to open/close it automatically - and adding lighting! - thanks for watching!
@RosalinaAndrade-o7j15 күн бұрын
Zź
@ramoncarrero417923 күн бұрын
How many monitors can I have?
@yoyoTechKnows23 күн бұрын
Depends how you view it - but technically as many as you want. I have some dashboards in home assistant I have embedded specific camera, I have them all connected to HomeKit as well - you can view them from the mobile app, and you can use the viewport to connect a dedicated monitor for full time viewing - you can have as many of these as you want (even combine across sites). - hope that answers your question - thanks for watching!
@leokimvideo25 күн бұрын
So sad the actual camera footage is nowhere to be seen here. Just ended up feeling like a giant ad
@yoyoTechKnows23 күн бұрын
I wish it was an AD - lol! I just really like Ubiqiti products - if they want to send them to me i would be happy to share that with everyone. I think I show some footage, but good point I should try and show more next time! - thanks for watching!
@wapphigh525025 күн бұрын
Home assistant
@yoyoTechKnows25 күн бұрын
I am not sure it’s for all beginners, but most people will end up there! Thanks for watching!
@OGKenG25 күн бұрын
Good video. I wish I would have found something like this when I started 5 years ago.
@yoyoTechKnows25 күн бұрын
Thanks - glad you like it - I have had a number of people ask for something simple to halo them get started! Thanks for watching!
@Hari-lz2vj25 күн бұрын
I'm thinking about buying a bulb
@yoyoTechKnows25 күн бұрын
That’s a great starting place! Thanks for watching and good luck!
@DougPrice325 күн бұрын
Samsung sucks, nothing or Samsung right now, and it will ever coming to my house.
@yoyoTechKnows25 күн бұрын
I don’t completely disagree, but for some people it’s a good place to start, but most will move on! Thanks for watching and for your opinion!
@anthonyhope258925 күн бұрын
Great video. Starting small is the key takeaway IMO. You can’t always automate everything with the time and money you have, so do it in increments. And I 100% agree that picking Zigbee as the default protocol. It’s easy to configure in ZHA and the devices are cheap. And the community is great too with content such as this.
@yoyoTechKnows25 күн бұрын
Thank-you for the feedback - and thanks for watching! I agree, most people I talk with feel it’s a big learning curve - it’s really just little building blocks coming together!
@slyr126 күн бұрын
Anybody can come over and install it
@markbfenton28 күн бұрын
If you use the hub with matter on HA, does it use cloud polling? Or can everythint be done locally without an internet connection? Thabks for the vid, very helpful.
@ypark2877Ай бұрын
Small lite is out now. Works on android to add additional input options in the house
@jaspermelchersАй бұрын
Great video! Can you please share the full YAML code for this card please? I'm a member, have been looking on your Discord but unable to find the code. thx!
@yoyoTechKnowsАй бұрын
@jaspermelchers Whats your Discord username - I can make sure you have access!
@jaspermelchersАй бұрын
@@yoyoTechKnows jasmz2, thanks a lot!
@billwhyte669Ай бұрын
@@jaspermelchersyou should be good now! Let me know if you don’t see the additional channel - should be a zip file pinned with the yaml and images!
@andrekaschuba9332Ай бұрын
@@billwhyte669 Ich sehe auch keine zip @fuismyname
@andrekaschuba9332Ай бұрын
I don't see any zipFile @ fuismyname
@angelambcaАй бұрын
I am glad to see your videos back in my feed. 😊
@yoyoTechKnowsАй бұрын
Thank you! And thanks for watching!
@andrekaschuba9332Ай бұрын
hi thank you the great template, where can I get the full code? and also the pictures.
@yoyoTechKnowsАй бұрын
Thank you - you should be able to find everything on discord, there is a channel for the Tesla card with a zip file pinned. Let me know if you can’t find it!
@cdarrigoАй бұрын
I have the same problem with the louvered shades/ plantation shutters. I'm wondering if there is a thin roller shade that is small enough to fit between the inside of the window and the shutter that can be automated. Please let me know if you find anything. I'd love to install one of these in my bedroom to avoid the light leakage from The Morning Sun that wakes me up early
@yoyoTechKnowsАй бұрын
I have been thinking about trying the same, I think they may fit! But I would still love to know if there is an easy way to automate the shutters, I am constantly opening/closing them! Thanks for watching!
@MiChaDU87Ай бұрын
How high is the battery consumption on the Tesla with this integration? or does this only work when updating like the tesla app?
@yoyoTechKnowsАй бұрын
Does not seem to affect it at all - it does not wake the car - so the data will get stale if the car is sleeping, you can add a force update button if you like which will wake the car when pushed, this why I added the last update indicator so you can tell how long since the last update! - thanks for watching!
@monochrome5297Ай бұрын
Sonos quality , its not, default speakers have a max frequency response of 44khz witch is low and apple belike, also 16 bit depth, i dont know about you guys but a good speaker have better responce and faster, for default start at 48khz , the sub dont go as low as 45 hz, also it is not powerfull enough compare to a speedsub, even kef do a better job for the pricetag, where audio matthers not eco system , and tons of useless latency adding junk and outdated hardware , i mysefl habe 2 sonos roams , 2 era 100 and a sub gen 3, they litterly dont outperfom kef r3 witha rotel rb-1070, they dont decrease bass when going above 50% volume unlike sonos, they let windows vibrade unlike sonos sub gen 3 witch is on paper more powerfull, they dont eform sound above 70% or push back the sound like sonos. Quality and good sound is not what sonos should have, its the dumb eco system like apple beleving peopel they have pro devices
@yoyoTechKnowsАй бұрын
Agree - the biggest feature for me is being able to add all your streaming services to Sonos, then anyone can control/use those services without needing my account info, or app (Apple, Spotify, Sirius’s) installed - without that! - thanks for watching
@n.r.2258Ай бұрын
Hi … How do you force the 66% mushroom card OVER the Gauge? Some how it doesn’t work for me … mine is always underneath the gauge… what am I missing ?
@yoyoTechKnowsАй бұрын
You can add a z-index: 100; or something like this - that will change the order that the elements stack on top of each other. Or if you head over to my discord channel, some of the members have shared some ways to actually change the guage number itself, so you don't need to over laptop - examples are too long to post here! - thanks for watching, and good luck with the new custom card!
@GodsMan500Ай бұрын
It looks very compelling, but don’t they sell any full “kits” for example an 8 camera kit that includes everything you need to set up your system?
@yoyoTechKnowsАй бұрын
I don't think there are any kits, but you can just mix and match to create your own. I find I don't always use all the cameras in the kits anyways - I did a lorex review a while back and the provided camera's were not used for the install I did. My recommendation is to get a Dream Machine pro or SE - geni.us/x8JW - this is your base for network and security, then pick the cameras you need for each location. Most often I use the G5 Flex - geni.us/rivftOo - or the PRO cameras - geni.us/5kRJ08Z - for even higher res. You could even go wireless if you can't get a cat5 cable run to some locations. There is nothing else you need! - anyway, thanks for watching and the feedback - good luck with your install!
@GodsMan500Ай бұрын
@@yoyoTechKnows I greatly appreciate your in-depth reply. You went above and beyond. I’m happily subscribing to your channel.
@ciaranreilly4320Ай бұрын
Man, your videography & editing are great but boy does it suck trying to follow along once you tell people to add the door locks. For future vids, please consider adding a pastebin of your final configuration or at least stop at certain points to review the code you've just written.
@yoyoTechKnowsАй бұрын
Thank you! I try to slow down a little, but I need to fast forward some parts or the video would be an hour. I do have a discord server that I have been sharing code on, and there has been some discussion - I have full code available for channel members as well - I can share better on discord if you want to check/ask there! - thanks for watching!
@jws3925Ай бұрын
I am sorry but there is no way this is not a paid testimony of the product. Too polished with data spewed out like he was a salesman or at the very least reading from a company script.
@yoyoTechKnowsАй бұрын
lol - I wish, I would love it it Ubiquiti would send me some gear! I want to try that DSLR AI lense if they are listening! I just use there stuff all the time for my home and client installs - sorry if it sounded like a pitch, I am just a big fan! If they send me some stuff - I will be happy to mark it as a paid promotion! - thanks for watching!
@psentieiroАй бұрын
Great video and valuabel information. Maybe you can help with something I´ve tried without any success . How to include a custom field on the upper right corenr of a chip card to show sensor value. There are any trick how to do that ?
@yoyoTechKnowsАй бұрын
Watch my video on how to create a custom tesla card - with that you can create pretty much anything you like and then insert it into a regular dashboard as needed. Let me know if you have questions with it - but hopefully you can see how I am doing it. - thanks for watching!
@FredSavage-d7jАй бұрын
I have the beatbot, its been great, but I would really like to see more about how your pool is monitored by home assistant!
@yoyoTechKnowsАй бұрын
Thank you! Glad you like the Beatbot AquaSense, I am using the Hayward integration installed via HACS for home assistant - will see if I can blue more info on it in a future video - also join me on discord and I can answer more questions! Thanks for watching!
@gerryf7015Ай бұрын
Have a look at The Hookup for a multi pool robo cleaners. Undared for 2024. Rob is very thorough!!
@thenerdshowАй бұрын
Nice ad for beatbot. A little too biased IMO, but overall a great video. Need to get my HA to monitor my pool levels like you. That’s game changer.
@yoyoTechKnowsАй бұрын
That’s fair, both are great - but the Beatbot is more affordable! Managing the pool with HA is great, especially for notifications, and voice control - “turn on the waterfalls” or “turn up the heat” - thanks for the feedback and thanks for watching!