The pipe length issue is simple, why cant you just make a measurement and shave some of it off

I've seen you in oregon

Let's go! Welcome back buddy, that looks like a nice rad!

Hell Yeah Brother 🇺🇸🦅

Just the video I needed! Thanks brother. This will be easy. The headlights will be fun!

hope you cleaned the rest of the crap out of the filter housing

Thanks for the detailed video. It's much appreciated

Where did you find that grille at?

can they be automatic so when you turn the truck off they automatically fold in? Thank you

Love the manual, I have one too! Just hit 200k

How longs it held up?

Would have been nice if you did a detailed video instead of being all over the place with it. You’re showing the install from having an already existing backup camera not installing a brand new backup camera. You said that the rca cables coming from the back was standard issue which is 100 percent false! You don’t show the exact connection to the reverse lights. Waste of video in my opinion!

you can call edge and they can send you a file to use it just for gauges you can ask them to swap it to a edge insight

💯🔥✌🏽

So at the end of the video when you had your truck running and you hear that ticking noise it sounds like two wrenches getting clocked together mine has that same noise what is that I've heard it's the CP3 pump and I've also heard that it's normal for the 6.7 to do that mine just started doing it.

What replacement h7 bulbs will work with these with out messing with the whole light? I have the same ones tried replacing with h7 led but they starting buzzing

ngl, when i seen the red bar on top of the monitor, all i could think of was "danger to manifold" - rip paul walker

Can i buy your old mirrors?

How long do u think those modules will last?

What brand are these and how do they last.

I know it's a long shot, but I got two questions. So the purple (trigger wire) can also be used as the red (12v power)? And where did you ground it?

Do you have to replace the valve cover gasket with injector harness attached or is it reuseable?

Doing a delete will it throw any codes?

Just installed them on mine. But when your riding dirty you'd probably wanna go with the stock😂

Still stock transmission? Lol that isn't going to last long brother. Unless you just have a stock pan on a built tranny. Damn 60 horse box smarty tune smoked my stock 48 in 3 months.

I wired my the same way but the bar light isn't working my came with what looks like some connectors that takes a bulb but doesn't come with a plug.

So how are transmission temps ?

Eating turbos isnt normal, its the oil system, your friend needs to really take a look at his oil circulation, get a manual oil pressure gauge (not a digital one) and run a line into the cab or to the hood so he can see the pressure in real time with a manual gauge, and he should get some AN line and build a custom oil feed line for his turbo, id bet either his oil pump isnt running at 100% or most likely his oil feed line to his turbo isnt big enough to properly feed turbos, its that or the wastegate/ blow off valve isnt working correctly but I'd bet a larger oil feed line will fix his turbo "eating" issue 💙 a lot of people will upgrade their turbo and not upgrade the feed line and most any upgrade to the turbo needs a larger feed line to properly deliver oil to the turbo, ecen the stock turbo benefits from a larger line. hope he gets it figured out because it shouldnt be eating turbos

Take the belt off and look st the pulleys and see which one looks like it has some rubber on it or is really shiny, then tske some sandpaper really any grit, and sand the pulley and the squeak will go away, also getting a good belt will help as well

Seems like everyone i know closes their doors by touching the edge😅 i must be the only pwrspn thst uses the door handle to close the doors haha

I installed rear trac bars and i replaced the front radius arms with the firepunk radius arms and it made a wrold of difference in how the 3rd gens feel on the road❤

I switched to the CAT 396-4596 oil filter because cat has better filtration and their filters are typically a better micron i believe the cummins cat filter is 2 micron and its works great. But i prefer to change my oil in normal intervals because i use a filter cutter and i check every oil filter to make sure there is nothing out of the ordinary and if there is then i can find the failing part before it takes out the engine😊 by cutting open your oil filter every time you change your oil, you can better catch issues before its catastrophic 💙 i change my oil every 3,500 miles to 4,000 it just depends on where i am when i hit 3,500😅 CAT 396-459 oil filter is a direct replacement for the mopar cummins oil filter that and hotshots oil has worked wonders for my street truck and my pulling truck which sees a lot of abuse😂❤

I wish someone would make a large touchscreen retrofit for the 3rd gens, i really love the 12" touchscreen in my 5th gen😊💙 I like the updated 4th gen console but I really like the "hidden" compartment under the middle seat i think it was a feature in the SLT trucks but i could be wrong. Both my 3rd gens are SLT so they have power outlets in the center consoles as well as the underseat storage under the fron middle seat I am thinking about a way to make the 4th gen top half of the console fit the 3rd gen bottom half😊

Idk why after all these years, boost auto has yet to add puddle lights to their mirrors. I'd buy a set if they made them with the puddle light like the newer generations have along with all the other features these mirrors have. They have yet to also add electric tilt even though its super simple. I've been waiting for boost auto to have the electric tilt and puddle lights and then I'll be grabbing a set for both my 3rd gens. They make the newer tow mirrors with puddle lights so idk why they dont add it as a feature we can buy for our mirrors. I fabricated a bracket to go from 3rd gen to 4th gen so i could get the tow mirrors with hest and switchback marker light and puddle lights i also put a switch in and power the power tilt and power fold but i would gladly buy boost auto mirrors with all those features that fit my 3rd gens instead of having to use a retrofit bracket😅❤

Smartphone plastic prybar tools work great for taking the covers off the mirror👍💙 and the tools being plastic they wont destroy the mirror covers like a flat screwdriver does

Oil testing isn't a real look, sure that shows what's in the oil, but honestly you need to pull valve cover and oil pan and check bearings to see if you are achieving the same wear or if the bypass system is starving the engine of to much oil pressure causing excess wear.

Finally a good video of these

Awesome video, love the power fold feature with our wireless tech!

Does anyone sit there? Is it comfortable?

They're switch back and power folding too?! 🥵 Nice shirt by the way! I'm happy to see this truck back on the channel.

How are you liking the short shifter?

Glad to see you on that truck again

Hell Yeah Brother 🇺🇸🦅

Much appreciated. I just got a 16 RT but because of surgery I can't go under my truck so I'm loading up on parts until they clear me..excellent video..thanks again

Keep an eye on that turbo, I’ve seen some posts of people not having much luck with that brand. Looks good!

Just had to put in Me getting my ass handed to me by that vband elbow lol

Nice video

turboooooooooooooooooooooooooooo

Hell Yeah Brother 🇺🇸🦅

I don't run an oil bypass and my UOA wear numbers are just as good or better.