Thanks so much for your knowledge on changing the belt on your L130 mower, I have the same mower except mine is the L120. My belt slipped off of the back of the transmission and I didn’t know how to fix it and this video helped me to figure it out with no issues.

Quality of light is the real question. Movie theaters use Xenon bulbs for a reason It's sharp your gonna pay for it just make sure to sneak some beers in :)

Thanks for the vid, just did all this to my 600 and it’s running a lot smoother. The carb was a little tricky to get back on but managed to do it.

You made a good and informative video, But, you should ALWAYS post the parts links in your description. To be really completely helpful.....Thanks very much.

Thats not xenon💀

Which one has better battery lasting?

Motor works not to the venting front

What kind of spark plus nd sizes it is

Thank you! It was a big help

Thank you

Thanks for this. I was wondering how to get the belt around the steering column. This was really helpfull

Purchased this to replace a guide pulley kzbin.infoUgkxO9seYZjlnuP5UvMkb7osQW3WxPVeSnPk on our John Deere x304 snowblower. As I stated in the title, it is just about perfect. The stock pulley has a spacer at the bottom. I used four washers to emulate said spacer, and it works perfectly now. Great product, and great price especially if compared to typical JD prices.

How do you know this is the problem? My JD not pulling up hills after it gets hot ? Thank you

Thank you for making/posting this video. I just replaced the steering gears for my neighbor and he noticed this belt was worn so he bought a new one, called me to tell me it went around the steering shaft. Are you kidding, the engineers now days are clueless! I wasn't very impressed with the steering design but this design is a joke, glad I have a Kubota! Anyway, thanks again, placing tractor on it's side and knowing the process in advance is great!!!

Obviously a xenon filled incandescent bulb. Not HID right?

Thanks for your video on tilting the tractor, my 21 year old JD L110 gave up the tranny belt ghost a couple days ago, smelt burn rubber coming from the tranny and figured it was the belt. Ordered new belt and idley pulleys and was able to tilt the tractor over about 45 degrees resting on the side of my utility trailer. Worked Great !! No oil or gasoline spill !!

Litt industries make a good 350 lumen

Thanyou

kzbin.info/www/bejne/a5DYqZikds-Ab8U

I still think any Maglite new or old is quality... I have seen many semi decent clones, especially using LED's, but I'm still impressed Maglite hold their own...

Xenon wins for me. Better color rendering and quality of light.

I’ve got to fix up my old br600. Your short and to the point demeanor is much appreciated!! Thank you

Is this hive better than a wooden one

Did you have to remove the clutch assembly or did you start in the front there and slide the belt over the assembly and into the clutch pulley? Thanks

No thanks I didn't ask about drive belt I ask about rod from forward and reverse pedal to transmission that what I ask for

Not no drive belt I said rod from forward and reverse pedal to transmission not drive belt

Best thing to do is throw it away.

The carb adjustment tool is a 4mm hex socket. The precision screw driver set at harbor freight includes one that works perfectly.

Very good step by step approach and info. Suggestion... post the parts links in your description. Thanks very much.

While you're under there, make sure you check the idler pulleys. I had a groove worn in my flat idler that was all the way down to the bearing! It's a lousy design and the belt doesn't have enough wrap around the pulleys as they should. Instead of the flat idler pulley spinning, the belt just skids across it and wears it out, since it's only plastic. It's a terrible design and it has been perpetrated for a loooong time on many models.

Thank you so much for this.

Thank you for the video. I am having a tough time removing the 2 pulleys. They seem to be seized in there. Sprayed with PB Blaster and let soak for at least an hour. Still won't budge.

why do people hold their phone vertical. its like turning your head 90° and looking at everything, hold your phone horizontal just like you see. BTW it's not a T25 it's a T27

One question I have is how far do the bulbs cast the light when say you're outside at night ? An ordinary table lamp will light up a room but it doesn't work very well as a searchlight .

The problem with new flashlights is all they care about is brightness. When I am under the dashboard of a car I dont want 500 lumens washing out everything and leaving me temporarily blind. I need a nice, warm, 30 lumen light that you just cant get with LED.

Great video very detailed 11/30/2021 it was needed.

Thanks, I had to force gear off steering shaft with a tie-rod removal tool. I am not sure if it was a factory thing or someone else wedged the gear on upside down or what. Once Tie-Rod tool removed gear I looked closely and the lube I had applied penetrated totally and no apparent rust. Beware!

Hey man is the transmissions shaft where to belt goes supposed to free spin? I bought a mower with no belt but the transmission free spins when iturn it with my hand is that normal

Very great video! Helpful and detailed descriptions of process.

Where did you get the parts from?

Can I put on the side with full tank of gas?

I'm having an issue with mine I have all 4 speeds on my 09 f150 for the blower motor but anything above 1 it only runs for a minute and shuts off to less than level 1 barely turning the fan under the dash is this what yours was doing? Just curious because I already changed the resistor earlier today and it didn't fix the problem thanks

Wish u would have showed it as u did it!

Setting the parking break does the same as the block of wood he used.

I replaced mine and the belt started smoking. When I looked the belt was chewed up. What causes that? Why is the belt so loose? Anyway to tighten?

Ok I did it your way but I did drain the oil and gas. Much much easier and faster Here’s the rub I bought OEM GX2006 belt But it wasn’t Johnn Deere I found out. Mower ran great for 1/2 hour then slowed down and wouldn’t climb any grade. It was the new belt. Got it off Amazon. Bought from John Deere a new GX20006 and runs like a champ. Also Changed both idlers pulleys New spring tensioner Drained the old tranny fluid out with a hand pump. Put 2 quarts of full synthetic 20W-50 oil in it and I swear it runs better then new. It’s pretty easy to get to the drain cap with the deck off you don’t have to remove the tranny. It took all of 20 min to do it. I had 400 hrs on the mower with no oil change. It’s suppose to be done every 200 hrs. If your John Deere is running slow or not climbing hills this could be the reason. So quick recap. Change the drive belt Change the 2 plastic pulleys Change the tensioner spring Drain and change the tranny fluid with 20W-50 full synthetic motor oil Most important Only use John Deere OEM parts It’s not worth saving a couple of bucks and having to do it again. The company that sold me the fake OEM belt was GRIZZLY BELTS. They lied so avoid them like the plague. This guys way of doing it is so much faster the crawling under there especially with how hard some of these nuts are locked on.

My belt gets stuck in the pulley under the engine why is that happening?

thank you so much, ive got a br 700 which is built nearly the same. After i put in a service kit including a carburator, it starts but turns off after 2 seconds if i dont prime while running. I really dont know why. Do you have an idea?

Great video

Mine doesn't have a clutch someone's put a regular pulley on