11 ай бұрын
Жыл бұрын
Пікірлер
@grantdyer7230 Ай бұрын
@bearplant looks like fun how many inches can it cut
@Ruffbiker68 Ай бұрын
You lot should have driven dumpers in the 1970s and 80s I bet you don't even know how to start them
@bearplant Ай бұрын
@@Ruffbiker68 strangely enough I started my hire business with an old 2wd forward tip thwaites dumper. Hand start Petter engine! I had to upgrade fairly quick as not many other people could start it 🤣🤦 that brings back some memories! Yes all machinery has changed a bit over the years it's true, hopefully for the better on the whole. 👍
@Ruffbiker68 Ай бұрын
@bearplant well done bud great to hear someone doing well if only I could turn back time
@Ruffbiker68 Ай бұрын
@bearplant the petter engine is what I grew up hearing especially the sewage treatment plant opposite my primary school and two cemeteries behind my school which was one that my dad worked in
@kovalenramen5856 12 күн бұрын
Hi...I want to buy the old style dumper., single cylinder with the crank shaft....thank you.
@hasinarshad Ай бұрын
Thanks for this! Helpful and right to the point
@hassanalmoathin5160 Ай бұрын
does the excavator lift off the floor?
@bearplant Ай бұрын
You can lift it off the floor yes, if it's not on a flat surface then it would expand/retract easier lifted
@hassanalmoathin5160 Ай бұрын
@bearplant thanks for your reply! do you lift it using the arm and the sled?
@bearplant Ай бұрын
@@hassanalmoathin5160 push the blade down one side and and the bucket down the opposite side to lift both tracks off the ground
@JamesBond-wy6sb 2 ай бұрын
Thanks for the video. Just did this to my u17.
@bearplant Ай бұрын
Glad it helped 👍
@kevinroberts2014 3 ай бұрын
Hi brake's still good on the valtra...got to do one on mine
@bearplant 3 ай бұрын
@@kevinroberts2014 yep brakes all good 👍
@kevinroberts2014 3 ай бұрын
Have you had your exhaust repaired or replaced?
@pubjitsuguy8596 3 ай бұрын
How bizzare you show the lever for moving the tracks and dont she the lever or pedal pressed to actually move them. Wtf
@bearplant 3 ай бұрын
0:20 > use the blade lever to extend the tracks 👍
@michaelmillette8695 3 ай бұрын
Thank you for this... not a wasted second in this video!! The track came off of my Rhino XN10. The manual mentioned something to do with grease but I was left quite confused, having no experience with excavators of any size. And then this little warning gave me reason to go to KZbin. "If the tension is not adjusted by the following designated procedure, the grease relief valve will probably fly out to cause injuries." Your video explained everything very clearly, while alleviating my fears of being injured by not following designated procedures.
@bearplant 3 ай бұрын
@@michaelmillette8695 Great! Thanks for the positive feedback 👍
@swiss300173 5 ай бұрын
I’m looking at one for my 5 toner, what kind of thickness hawthorn would it comfortably shear thru? Mostly hedging work I’ll be doing .
@bearplant 5 ай бұрын
@@swiss300173 this one will do 7" hardwood and 8" softwood. The collector is a big time saver for hedgework
@swiss300173 5 ай бұрын
@@bearplant cheers thanks for reply, collector adds a bit of price on tho 🤔
@bearplant 5 ай бұрын
@@swiss300173 yes true
@philriall4508 5 ай бұрын
Thanks, good informative video. Certainly helped me change my tracks, wouldn't have been able to otherwise!
@bearplant 5 ай бұрын
@@philriall4508 great 👍
@RidgewoodDriveways-u2u 6 ай бұрын
Great Video! Thanks 👍🏼
@bearplant 6 ай бұрын
No problem, Cheers 👍
@tonydunne9659 9 ай бұрын
Brilliant!
@Joe-jv5mm 9 ай бұрын
Brilliant informational video for the Novice DIYer 👏👏👏
@davidharris3823 10 ай бұрын
Interesting, I got a new U17 and I don't have anything like that, no pin to pull etc. I don't know how to change my bucket as of yet nor do I know what keeps the bucket currently on from falling off.
@davidharris3823 9 ай бұрын
I was suppose to have a quick hitch when I bought it but it didn't come with it. Until I get that sorted out I want to change buckets.
@bearplant 9 ай бұрын
If you have no quick hitch on at all then you will need to take out the 2 pins connecting the bucket on every time you want to change buckets. I would recommend greasing them every time, once you've changed buckets. I could probably do a video for this at some point if it would be helpful?
@davidharris3823 9 ай бұрын
Turns out it's a quick hitch, just a very new design that doesn't use a pin, it stumped the Kubota Teck until he figured it out So I'm happy with it as it is a quick hitch + I can put my buckets on in reverse (be handy in the cemetery). Dave
@bearplant 9 ай бұрын
@@davidharris3823 ideal. Yes some jobs are so much easier with the bucket on backwards 👍
@stevem9776 11 ай бұрын
Great vid, clear and informative. Do you know where you top up the hydraulic fluid?? Steve
@bearplant 11 ай бұрын
Thanks Steve 👍 Hydraulic filler cap should be under the bonnet, opposite side to the fuel filler.
@bobrose7900 11 ай бұрын
Well done and a good result, shame about the missing return valve/port. I have Engcon on a 3T and it works similarly. The Rhinox manual quick hitch on a 1.2T is a pain, even with their buckets. Makes for a good workout though! A couple of hopefully constructive comments: get some wrap for the hoses and a grease gun for Christmas!
@bearplant 11 ай бұрын
Yes once you have a hydraulic hitch on one machine it's hard to not want them on everything! Yes wrap would be a good Idea 👍 though some customers seem to be able to damage anything... 🤦 Does it look un-greased? Everything gets greased before it goes out on hire - but I also hate overgreasing as the grease needlessly running down the arm and smearing everywhere really bugs me 🤣🤦
@markedwards4331 11 ай бұрын
Whats with crazy music really annoying.
@bearplant 11 ай бұрын
Lol, sorry it's not meant to be annoying. I'm afraid I'm only learning what works for videos 👍
@rachelmorellet2665 Жыл бұрын
Thankyou! Our track just came off, now we know how to get it on again
@bearplant Жыл бұрын
No problem 👍
@waylon2432 Жыл бұрын
'PromoSM'
@randomnkbr Жыл бұрын
Thanks 👍
@bearplant Жыл бұрын
No worries 👍
@sinanal-hermiz5226 Жыл бұрын
Many many thx for teaching me this amazing easy way to change the truck.. I really appreciate it 🙏 God bless you 🙏
@bearplant Жыл бұрын
You're welcome, glad it's been of some use 👍
@MutluMeniye Жыл бұрын
Fiyatı nedir
@bearplant 11 ай бұрын
Around £20k I think
@IHustleHard416 Жыл бұрын
How much for this quick connect
@bearplant Жыл бұрын
Sorry I don't know as it came with the machine. Try giving your local dealer a call 👍
@grmichta5541 Жыл бұрын
Pozdrowienia z Polski. Też będę teraz naprawiał hamulce teraz wiem jak 😅
@bearplant Жыл бұрын
Great 👍 Greetings from the UK
@dognott Жыл бұрын
Thanks for the vid, just did my K008 on a hillside in the middle of nowhere!
@bearplant Жыл бұрын
Nice 👍 Once you've done one rubber tracked machine they're all pretty much the same, just they get very heavy for bigger machines!
@nitinmore623 Жыл бұрын
👏👏👏👏👏💐💐💐💐💐
@pranayborje4800 Жыл бұрын
N=p
@bearplant 11 ай бұрын
👍
@lukestarling6810 Жыл бұрын
1 tonne skip loader?
@bearplant Жыл бұрын
Yep 👍
@lukestarling6810 Жыл бұрын
@@bearplant always handy them
@bearplant Жыл бұрын
@@lukestarling6810 yes I run a few thwaites. They seem decent machines
@lukestarling6810 Жыл бұрын
@@bearplant speaking as a groundworker they are by far the best and reliable dont skip a beat and everyone I know in the trade prefers thwaites
@kimdani1795 Жыл бұрын
would have chosen with tilt
@bearplant Жыл бұрын
Would be nice, but not worth it for a hire machine 👍
@Chapstick4387 Жыл бұрын
Good video, about to change my tracks on my yanmar sv08 so this video helps a lot. Thanks!
@bearplant Жыл бұрын
Great 👍
@AndreRamos-k6n Жыл бұрын
That "kit" is missing a lot of stuff lol😂
@bearplant Жыл бұрын
True! 🤣
@AndreRamos-k6n Жыл бұрын
@bearplant I'm in the process of buying a Chinese mini excavator , I think will follow ur tips in this , do you know more less to what pressure is this solenoid rated ?
@CaryCrites Жыл бұрын
Can a bucket be installed reverse on one of these Kubota excavators? Thanks for the video!
@bearplant Жыл бұрын
On all the Kubota machines I have - yes no problem 👍 There are certain types of quick hitch an bucket designs that it doesn't, but they're not so common.
@CaryCrites Жыл бұрын
Thank you!
@patrickjohannik9554 Жыл бұрын
Which quick hitch are you using
@bearplant Жыл бұрын
This machine has a whites hitch on it 👍
@patrickjohannik9554 Жыл бұрын
Thank you. Will have to look that one up. Is that standard pin cofig or convert to S30
@bearplant Жыл бұрын
@@patrickjohannik9554 as far as I know it's standard. I think that's the make Kubota UK fit unless you ask for something else.
@RidgewoodDriveways-u2u 6 ай бұрын
Great Video! Thanks
@hamishpedersen5651 Жыл бұрын
Champion, thank you !
@bearplant Жыл бұрын
Thanks
@KUBBI7488 Жыл бұрын
Great video !!!
@bearplant Жыл бұрын
Thanks 👍
@JamesThomas-e4m Жыл бұрын
I'v got one the same done about 300 hours and it is excelent.
@bearplant Жыл бұрын
Nice, yes it really is a good machine. I'd love another but they keep going up in price!
@mauriceclosset8008 Жыл бұрын
C esr possible le francais merci
@Leo-ji8yh Жыл бұрын
This was very useful thank you
@stevedue4485 Жыл бұрын
I ended up removing my hydraulic quick connector as kept breaking connectors on hoses, poor design , digging anything deeper than bucket would amount to rubbing them off.
@bearplant Жыл бұрын
That's interesting. What make was the hitch? These pipes actually broke after about 20 hours of use but after replacing them and routing them better on the arm, they seem to have been ok since with no problems
@stevedue4485 Жыл бұрын
It is a china digger and hitch. Smaller arm as well went on top of arm which is ok but out of the hitch they cam out the side instead of like yours Ollie is cute lol
@bearplant Жыл бұрын
Ok, yes these pipes are tucked reasonably well out of harm's way - but stuff happens! As for Ollie... he's a cheeky monkey like them all 🤣
@villageearthwright Жыл бұрын
Really great video, i appreciate seeing this whole process. I do a lot of tinkering on my own machines and love to see how things like this quick hitch are installed. How come you didn't get a new hitch that fit your old buckets?
@bearplant Жыл бұрын
Thanks 👍 The hitch that was on it was made to take a different size pin setup to a standard one for that machine, which was a pain as it meant it wouldn't fit other attachments I had for other identical machines. But actually buckets and their pins (especially when they're welded into the bucket and you can't change them) get worn out and sloppy aswell.
@TMKMachinery 2 жыл бұрын
Nice video, especially loved your commentary! 😄👏 Those were some descent sized tree to say the least. Nice to hear you like the shear! -Jesse
@bearplant 2 жыл бұрын
Thanks. It's out on it's first hire and the customer loves it, especially the collector. 👍
@TMKMachinery Жыл бұрын
@@bearplant Wow that's awesome to hear! -Jesse
@haggardridingkohn2057 2 жыл бұрын
Is that a 24inch toothed bucket? How well does the machine handle it? I just got a u17 and would like to get a bigger dig bucket
@bearplant 2 жыл бұрын
Yes it's a 24". They handle them ok actually, no more load weight than than the grading bucket 👍