Nice looking Camry. I just picked up a 2008 Camry se same color manual transmission with 56k miles all stock about a month ago. Things I added recently window tint, window visor, plastic dip emblems, led foglight, led low bean and added a megan cat back exhaust. Next mod is weather tech sunroof visor on order then rims.

What is the paint you have on the car?

Do you have a link to that head unit? Btw, nice car.

I thought you bought faheren low beams and high beams sorry to say, but these LEDs suck. I would never buy these like one come it said there’s no obvious difference between high beams and low beams.

Nice video. Will be tackling this in the near future myself. Also, after watching your ratcheting...I will get a power ratchet🤔.

I want to take out my passenger seat and keep it out with me unplugging the seat and leaving it unplugged will it send codes or do any harm with airbags?

Your Camry interior looks cleaner than mine. I'm gutting my interior for a custom built roll cage, I'm no longer gonna have back seats and Rear Door panels. My Camry is the same year with a Manual Transmission it's an CE model with an SE interior and power Sunroof I'm removing the Headliner as well, so I guess I'll have to relocate my Sunroof switch.

hey you have any advice on saving gas i feel like i burn through a full tanks in no time at all

Can I use the rear strut bar of the backseat as a ground point? Or what part of the inside trunk has good ground point because I have an amplifier for subwoofers and I need help finding a good ground point. It's a 2007 Toyota Camry SE.

Pulling the fuse from the fuse box does not work as it disables the high beam entirely. There is apparently a separate DRL relay box in the dashboard or somewhere around there hidden away that sends the power the DRL high beam needs to run at low power. If you do happen to know it's location by any chance, please let me know.

I have the same car as yours and have been trying to locate the DRL resistor location so I can unplug the high beam DRL circuit. Would you by any chance happen to know where it is located?

i have an 07 camry SE in black and I like some of the mods you've done. Can you send the link for them? (toyota door light, door sil, and the black wheels) Is that rear view mirror stock or did you swap it?

What ? You can't lift it yourself?geez

Hey bud, I have an 07 Camry SE v6 and my lights are overall pretty terrible after upgrading to Auxito LEDs without decoders. So I just bought them & as they're on the way I was curious to see if you ever tried using the new bulbs without the decoders at all to see if they flicker before and after you installed the deocoders like mine do. In my case the lows are almost invisible & the highs are barely acceptable.

the thing that you hooked the ring broke on my es350 and i ordered a spring to give it a try. it's barely holding itself open with only one side holding all the weight. thanks

My parents are about to give me an old 2008 Camry they’ll no longer use and this was a big help, thanks! Looks great!

Thank you very much

guys they literally plug in just like your toaster but are more painful to get out.

I’m shocked how you video, in real time, how remove #4 - 14mm bolts.. and then “just like that” the hard things… cables are disconnected. I can take out bolts; I’ve done it hundreds of times .. the cables on the other hand, are not something I have a lot of experience in doing, and it seems to me they are far more important to explain in some detail so I don’t have an airbag go off by accident later on.

Thanks for this, I took mine out to replace the rear shocks and could not get it back in properly. Now it rattles and drives me crazy. Hopefully using your method I can get that bastard refitted. Worst design ever

Today because of this video I was able to take off a the trim I want to replace on a 2009 Camry LE so thank you for this video boss!!!

This setup is badass. I like it

Surprisely these Camry's look pretty good when cleanly modified. This was a great starter car for you for modifying.

You never installed any vapor canister filter back on? How is it now and did you jusy let that other hose hang there/tied up?

Probably needed a longer one 😅. Thanks for the video I didn't want to brake it but now I know what to do. Thanks a bunch bro

Which light bulb do I buy from that?

Does it work on SUV hatchbacks

What's the deal with flipping Toyota emblenings, I feel like it's an insult to Toyota.

Thanks for posting the videos. Any problems and issues after driving it for a bit.

I just bought a Toyota Camry 2007, I can't wait to modify it! Love the way your car looks!!!😁

Hey some have said that just changing the bulb to LED will give you brighter light but will blind oncoming traffic? I’ve seen those myself been caught in blinding lights . They said go with the entire assembly change out ?

Does not work for my 2011 camry xle the fittings dont go in evenly

You answered a very important question for me. How much of an overlap is necessary for the moonroof visor? Looking at your video, I can now place an order with confidence that an overlap of about 1" or slightly more is good. Thank you! The detail in your video is how I answered my question!

These dont work if you have gas struts fitted , tried them on my lexus is 250 DONT WORK.

I was wondering if you ever thought about getting a digital cluster I just wanna see that vid

Sweet, I just got a comple leather interior for my 2011 6 speed camry, gonna tackle the back seat this weekend

It helps..great job..thanks

Fast forwarded alll the important steps ...

Horrible video.. this job did not have to be this difficult as shown here.

Thanks man!! Easier than i thought

dude invest in better impact gun you wont need to cut all the bolts lol.

What’s the thread size for the Camry I’m about to get one and wanna order a knob before I get it

Did it damage your hinge mechanism over time?

Best 🔥

Best channel in the world

What are the rims

Can i use the other spring your not using …. Would appreciate that big time bro👊🏼😎

Helpful video! Thank you!

Yea about a yr ago I tried removing to get to the rear coil dampeners, I gave up. I now have a reinspired faith it can be done lol 😅

What brakes do you have? Any links would be appreciated. Thanks