Tibor Von

Пікірлер

@jammer2150 Күн бұрын

good looking boat and beautiful location. One of the tricks back in the day for the onroad speedrun guys trying to join the 100mph club was to put the esc in nimh mode what that does is leaves the esc gate valve for power flow wide open, with a car you could get a couple passes out of a 5000 mah lipo and still be above lvc threshold, a boat might be different but I would imagine you could get at least one pass without dipping below lvc, of course the esc in nimh mode would never register lvc so you would have to use caution or use an external battery lvc alarm.

@RCplamodel 3 күн бұрын

Nice😊😊😊

@brettpanting7528 4 күн бұрын

Good vid, the layout on my alpha is different, it's considerably more forward than yours, I run a 1.4/62 & get 80-90km from mine with stock motor, 150amp esc, different rudder 4 2× water pickup(ruder 2 esc, maim 2 motor) 3 total, & runs cold. Will be getting a 65mm aiming at 100km/hr, then I will be happy !

@GARYU-S44 5 күн бұрын

I look forward to your continued support in 2025 🙇 My friend🤝😁🥳

@tiborvon 4 күн бұрын

Thank you my friend. I will support you channel

@GARYU-S44 4 күн бұрын

@ 😉👍

@rcplaytime 9 күн бұрын

fantastic boat and great place, ah mate i feel for ya, ive had to wade out many times, it's terrible 🤣🤣👍👍

@tiborvon 5 күн бұрын

I can’t tell you how cold it was, it took my breath away 😂

@gillian9178 9 күн бұрын

Still more in it Tibs with more tuning, the best I have seen this boat run stock is just over 54mph. Guy had stock boat, running 6s on the 60mm 4s propeller.

@tiborvon 5 күн бұрын

I agree mate. I was going to meddle with the prop angle until i got cut short. But you have given me a target now lol. Watch this space lol

@gillian9178 5 күн бұрын

@@tiborvon I ordered the Alpha 1000 yesterday from M/sport, due for delivery this afternoon.

@xbullyx09 9 күн бұрын

🤣😂 class

@tiborvon 5 күн бұрын

😂😂😂😂😂

@JF-RC 9 күн бұрын

Hey Tibster ! 😙😗😚😙😗😚and a great run too 😂😂😂hope the rozzers didn’t pull you over on the way home 🫣think those legs would have got them going 😂🤣😂🖐️happy New Year to you and the family 🍾🥳🍾🍾🥳

@tiborvon 5 күн бұрын

Thems some sexy legs 😂😂😂😂. Happy new year my friend

@CARMELOGUARRASI 9 күн бұрын

Top my friend GREETINGS FROM ITALY 🇮🇹

@tiborvon 9 күн бұрын

Happy New Year my friend

@scaleworksRC 9 күн бұрын

Stripes were earned today

@tiborvon 9 күн бұрын

Thank you very much 😂😂😂😂. I hope I don’t earn any more ha

@tiborvon 9 күн бұрын

Happy New Year buddy 🎉

@scaleworksRC 9 күн бұрын

@@tiborvon Lol at the least, you got a massive improvement in performance & Happy New year to you as well!

@thecontractor365 9 күн бұрын

Amazing technology these days. I remember the old days we you needed batteries to power the receiver..😅

@tiborvon 9 күн бұрын

Thanks a lot dude. These RCs have come on a long way haven’t they lol

@tiborvon 9 күн бұрын

Happy New Year 🎉

@thecontractor365 9 күн бұрын

@tiborvon Wishing you a Happy New Year too..🍻

@ourr.c4065 9 күн бұрын

Tibs the water baby 🤣, great results mate.

@tiborvon 9 күн бұрын

Cheers pal 😂😂😂😂. My nads were frozen ha

@tiborvon 9 күн бұрын

Happy New year

@ourr.c4065 9 күн бұрын

@ I bet🤣🤣🤣

@ourr.c4065 9 күн бұрын

@ same to you tips

@BasBoyRC 10 күн бұрын

You are getting there with the speed, needs lots of tinkering to get it to plane right. LOL the water over the top of the waders must have been bloody cold 🙂

@tiborvon 9 күн бұрын

Mal !!!! When that water went over the waders, it took my breath away lol. There’s a small area of the puddle that just gets deeper because the surface isn’t fully flat. One of the lads was actually filming me in the water but when he sent me the footage on WhatsApp, it wasn’t good enough quality to upload onto my video. I fully blame Tomas as he wanted me to do a little video of his upgraded boat and he decided to go for a run in the middle of me making my own video lol. So we were going to tinker with my boat further but got cut short. I had to go home because i was so cold. I have woke up this morning with a blocked nose and probably have a cold for a few days now lol. But it was good fun as always ha

@tiborvon 9 күн бұрын

We will return in the new year for run 3 !!!

@tiborvon 9 күн бұрын

Happy New year mate 🎉

@BasBoyRC 9 күн бұрын

@@tiborvon Happy New Year, well I hope 😞

@philipsparrow7977 10 күн бұрын

Guys it's literally in the set up. Someone mentioned strut angle adjustment. (in this case raising it a couple of degrees) which was what I suggested last post. This may have a greater influence on the ride than trim tabs alone. Lastly COG. Rule of thumb used to be something like 28 to 30 % from the transom. Not written in stone, but a guide. Keep trying fellas.

@tiborvon 9 күн бұрын

Hello dude. Yes, one of the further adjustments that we intended to do today was alter the angle of the prop. I actually had a protractor with me to day to be able to set things up and not angles etc. however, the rear tabs will not go any higher now, they have hit the stops. We then noticed that the battery trays could be moved and hence tried this. But our next adjustment was going to be the prop angle, but unfortunately we got cut short because i had go fish Tomas bot out of the puddle and got a bit wet lol. I couldn’t carry on because i was freezing lol. My waders were that heavy with the weight of the water inside them that I couldn’t risk going back into the water to retrieve a boat, it was like wearing moon boots lol.

@tiborvon 9 күн бұрын

Tomas wanted me to make a little video of the mods that he has done with is Vector SR80 and he decided to do some runs whilst i was in the middle of doing my video. So i had go retrieve his boat a couple of times in the middle of making my own video and on the final occasion disaster struck and i got wet lol. He ran his boat into the reeds at the other end of the puddle twice. But on the last occasion, the area that he went into is slightly deeper than the rest of the puddle. The surface in that area dips down and that’s why i got wet. Most of the puddle is only about knee deep, that’s why we come here but there is the odd spot that gets much deeper.

@tiborvon 9 күн бұрын

But we will go back in the new year and try again !!!

@tiborvon 9 күн бұрын

Thank you for you comments and help, happy new year mate 🎉

@gillian9178 10 күн бұрын

Take the trim tabs up a touch more, you can also change the angle of the strut. Using a straight edge along the keel, angle the strut drive line up at the propeller end a bit. This will raise the front more & loosen the boat up more, ps cracking pair of legs Tibs lol.

@tiborvon 9 күн бұрын

Glad you like the legs 😂😂😂😂

@tiborvon 9 күн бұрын

We were cut short today because i got wet lol, when the water went down my waders it was that cold that it took my breath away lol. The trim tabs at the rear will not go any further up now, they have hit the stops. So the next we were going to play with, was the angle of the prop at the rear. The boat is still not lifting up enough. I know from our other speed runs with our boats that the boat is almost fully out of the water, but this boat is still much lower than these other boats. I actually took a protractor with me today to make to use for the prop angle and tabs angle. We will go back for a third run in the new year.

@tiborvon 9 күн бұрын

I was also a little disappointed with the new 60c batteries. The ESC went into limp mode and i was not expecting this with the new batteries. The manual for this boat states 40c plus so i was expecting the batteries to perform better. Bizzare as well is the fact that the boat is running so cool, everything is really low temperature which , when compared to our other boats is massively different. The other boats get far hotter when doing these speed runs.

@tiborvon 9 күн бұрын

The box states 80kmh. Our best run today was 48mph which is 77kmh. So i recon if we can raise the boat a little more out of the water then we will hit the 80 kmh, which is what it says on the box. We will see !

@CoachD386 10 күн бұрын

💪🏾💯 niiice brother

@tiborvon 10 күн бұрын

Thanks Coach bro

@RallyandTrail 10 күн бұрын

Quality video Tibs 😎 Happy new year mate and nice legs 😍

@tiborvon 10 күн бұрын

Thank u 😂😂😂 and happy new year mate

@ramblers69 10 күн бұрын

Nothing like a cold water plunge Tib 🥶

@tiborvon 10 күн бұрын

I was soaked Tom lol. I had drive home in my boxer shorts lol

@MrDevo5 10 күн бұрын

Wow Tibs getting proper scientific about this boat. Pity about the drenching. 😂

@tiborvon 10 күн бұрын

I was proper wet Dunc. I went under the water and it was that cold it took my breath away lol

@GARYU-S44 14 күн бұрын

I will continue to support your videos 🤝 My friend😊🎶👍

@tiborvon 12 күн бұрын

Thank you very much. Happy New year my friend🎉

@GARYU-S44 12 күн бұрын

@ 👍😆

@GARYU-S44 14 күн бұрын

I will continue to support your videos 🤝 My friend😁👍🎶

@EscapeWithMia 14 күн бұрын

Nice slomo edit, looks cool

@sam97eck 14 күн бұрын

Great first run 👍

@tiborvon 14 күн бұрын

Cheers pal

@philipsparrow7977 15 күн бұрын

Scuffing the bottom of the Hull with scotchbrite in the area where the boat sits in the water at speed can eke out another mph or two. It's an old racers tip, does seem to work. Aquacraft models used to suggest doing it.

@pandacrawler6x6 15 күн бұрын

Cool and Amazing Vídeo my Friend 🎉❤🎉 Nice Snow Adventures 🐼👌🏻

@pandacrawler6x6 15 күн бұрын

Amazing RC boat action Footage!!! ☃️🎅🐼👌🏻🇵🇹

@tiborvon 15 күн бұрын

Thank you very much my friend. Happy Christmas

@pandacrawler6x6 14 күн бұрын

You're welcome my Friend!!! Cheers 🐼👍🏻

@scaleworksRC 15 күн бұрын

Drag is the biggest speed killer on the water. Nice maiden, and got the gremlin out of there quick!

@tiborvon 15 күн бұрын

Thank you. I will raise the boat out of the water on the next run by adjusting the tabs. Happy Christmas 🎉

@RCplamodel 16 күн бұрын

Thank you for the great boat and video! 👍👍🚙🚙😎😁

@tiborvon 15 күн бұрын

Thank you very much my friend and happy Christmas 🎉

@philipsparrow7977 16 күн бұрын

Just a quick one guy's. The boat runs quite wet which will also rob speed. Maybe adjust the trim tabs, play about with the strut angle if it is adjustable. Need to get more bow out of the water. Good luck.

@tiborvon 15 күн бұрын

Thank you very much. Yes, on the next run I will adjust the tabs and raise the front. Happy Christmas 🎉

@gillian9178 16 күн бұрын

Where did you buy your Joysway Alpha from. Happy Christmas mate.

@tiborvon 16 күн бұрын

I got it online from Modelsport

@mark-1rc502 16 күн бұрын

Thats a Long one 😅

@tiborvon 16 күн бұрын

Been told that a fews before 😂😂😂

@hollyhillrc 17 күн бұрын

I'm glad it went well in the end because you were looking more and more disappointed as the video went on. It's a horrible feeling when something new doesn't run properly.

@tiborvon 16 күн бұрын

Hello Derek. Yes, it started off a bit grim lol but got better to the end. My poor soldering didn’t help. I have bought some more batteries today, slightly smaller ones but still Gensace. But i also like to show the truth about my RC adventures and what can happen. Will be out again soon for run number 2. Happy Christmas matey

@gillian9178 17 күн бұрын

The outrunnner motor is a 1300kv, boat is running ok for first run. It does need trimming out a bit for more speed, as the boat is running a bit to much bow down & running to wet at full throttle. Try adjusting the trim tabs up a bit, you can also adjust the drive angle of the strut angled up a degree or two at the propeller end of the strut. These adjustments will raise the front of the boat up, helping the hull run looser out of the water more for more speed. CG (center of gravity is also very important on boats), good starting point for CG on a Deep V mono is 33% in from the rear of the transom, in the case of the Alpha starting point for cg is around 310mm forward of the rear of the hull.

@tiborvon 16 күн бұрын

Thank you very much for this information and advice. We will take this on board on the next run. Happy Christmas

@ramblers69 17 күн бұрын

44 is pretty good Tib, looked like a lot of fun, 👍🎄🎁

@tiborvon 17 күн бұрын

Thank you Tom. Yes, it was a good start once we got a decent run. I will sharpen the big prop like a razor for next time 😊

@CoachD386 17 күн бұрын

💪🏾💯

@tiborvon 17 күн бұрын

Happy Christmas Coach bro

@RCBirds 17 күн бұрын

Awesome runs. Can't await what you get more out of it with the 60.

@tiborvon 17 күн бұрын

Thank you Dirk. I enjoyed it today. And I like showing all the issues that we go through lol

@JF-RC 17 күн бұрын

Hey Tibster, another great run with the Normski…44mph is very respectable with the blunt 60mm prop. I’m certainly you’ll be able to hone out to the 50mph, looks like the setup seems to run cool, allowing some wriggle room for upgrades. Definitely top stuck from the Tibster and Mr Bizarre! Merry Christmas and a happy New Year to you and the family 🎁🥳🎄🎅

@tiborvon 16 күн бұрын

Thank you very much John. Yes, the cool temps means we can go bigger on the prop lol. Happy Christmas to you and thank you for the great support you always give me

@RallyandTrail 17 күн бұрын

Great run mate 😎 Merry Christmas my man 🎄

@tiborvon 17 күн бұрын

Thank you buddy, and happy Christmas 🎄

@ourr.c4065 17 күн бұрын

Cool stuff tibs.

@tiborvon 17 күн бұрын

Thanks dude. Was happy with the result in the end, and everything was cool inside the boat so I will look for a bigger props to try 😊

@thecontractor365 17 күн бұрын

Wow dude, that's such a smooth runner, like it was gliding across the water. Great first run..👍🏻🙂.

@tiborvon 17 күн бұрын

Cheers dude. Yeah, it runs really smooth for a v hull, and much cheaper than other 6s boats. Am very happy 😊

@tiborvon 17 күн бұрын

And happy Christmas 🎄

@CARMELOGUARRASI 17 күн бұрын

AWESOME MY FRIEND 😊 GREETINGS FROM ITALY 🇮🇹🚤🔝

@tiborvon 16 күн бұрын

Thank you very much and happy christmas

@HEAVENGLAMOUR 17 күн бұрын

Nice 👍

@tiborvon 17 күн бұрын

Thank you very much, I enjoyed this 1st run today

@BasBoyRC 17 күн бұрын

The adaptors that was not needed. It did go well 🙂

@tiborvon 17 күн бұрын

Yeah, i made them for nothing 😅

@tiborvon 17 күн бұрын

All ended well in the end though lol

@tiborvon 17 күн бұрын

Happy Christmas Mal 🎄

@BasBoyRC 17 күн бұрын

@@tiborvon Have a good one and Happy New Year.

@BasBoyRC 17 күн бұрын

@@tiborvon It did 🙂

@EscapeWithMia 17 күн бұрын

"Tickling it up a little butt" 😂 looking good

@tiborvon 17 күн бұрын

😂😂😂😂

@tiborvon 17 күн бұрын

Wasn't so cold today, I could feel my fingers and toes lol

@EscapeWithMia 17 күн бұрын

@tiborvon I could have even tried chasing it with the drone today, you still managed to get wet though 🤣

@tiborvon 17 күн бұрын

@@EscapeWithMiaI always end up wet 😂

@MrDevo5 17 күн бұрын

Nice edit again Tibs 👌

@tiborvon 17 күн бұрын

Cheers Dunc

@jspeedrc 17 күн бұрын

🤙🏽🎅🏾

@tiborvon 17 күн бұрын

Happy Christmas my friend

@carlbModels 22 күн бұрын

nice!!! now why you not replying to PMs? hope you're ok dude 👍🍺🇬🇧

@JF-RC 23 күн бұрын

Hey Tibster, that was a great run, shame about the hull splitting, I sure with some good old British ingenuity the hull should be able to be repaired to live another day, but perhaps with a little less power? Hmmm….maybe not, that’s not the NWC way, power is everything 😂😊😂 best wishes to you and the family and Merry Christmas 😊

@tiborvon 17 күн бұрын

More power, more power 😂

@tiborvon 17 күн бұрын

Happy Christmas buddy

@jspeedrc 23 күн бұрын

👌🏽✌🏽top

@tiborvon 17 күн бұрын

Thank you 😊

@AdventureTimeRC 23 күн бұрын

Your a brave man standing out there with that water missile lol pretty quick

@tiborvon 17 күн бұрын

Brave or stupid 😂

Ең жақсы KZbin

Пікірлер