Cracking video a genuine guy that share, instead of extracting eyeballs top man thanks a 1000 times
@lutz644119 күн бұрын
Thank you for nice words, appriciate!
@krishnachaichaiporn1161Ай бұрын
Excellent video. Thanks.
@seal777fulАй бұрын
Thank you
@MrRan994Ай бұрын
diferent model rogue 😢
@jaystheone1Ай бұрын
Is there only camera option where you have to cut the hole?
@MrMili0002 ай бұрын
Velice Děkuji !!!
@callumwilson1672 ай бұрын
i have installed and coded however i just get a black imagine where camera imagine should be on screen?
@nikolaradosavljevic68422 ай бұрын
Awesome tutorial I was trying to find this whole month Thank you😄
@zeljkoadzic16922 ай бұрын
tnx, awesome task... job
@Irish_Balladeer2 ай бұрын
What a very informative video, brilliant. So I thought I could use the sensor wire for connecting a back camera ?? No?
@lutz64412 ай бұрын
No, there is dedicated wire loom to connect camera. You have to run this wire harness from back to front, to connect with head unit Columbus .
@Irish_Balladeer2 ай бұрын
@@lutz6441 I took out my head unit with Amundsen Nav, cant update it and mounted a Chinese Android head unit so wanted to mount a back camera , will check that. May I ask, I can see a double black Fakra cablei disconnected in the skoda superb and there is a single blue Fakra i believe these are the antenna. connected the blue one as the head unit only has one single fakra connection but got no radio. I can see on your other video for a polo head unit you used a double to single adaptor cable maybe I need one of them ?you maybe have a link or suggestion....thanks Lutz
@lutz64412 ай бұрын
@@Irish_Balladeer With Chinese unit it should be different, as you look RGB cameras from Aliexpress, which have RCA cables with the set. Fakra cable is only for OEM headunits if I´m correct.
@dennisostberg58453 ай бұрын
Why dont show everything?
@highathebeach48183 ай бұрын
Where is xenon leveler in golf 6?
@martintodorov5993 ай бұрын
awesome job and thank you for sharing! does the motor in the strut have a part number or something like that so I can order and replace only that? I get "0018 - Motor 1 for rear lid B11D9 13 [009] - Open Circuit" although the struts look pretty much new (bought them second hand). It's about a vw passat b8
@lutz64413 ай бұрын
Thank you, most likely it´s imposible to find replacement motor from the market (maybe only used one). I strongly recommend to open them and carry out prevetative maintanance as I did with mines.
@andreibarbu39243 ай бұрын
Hello! It also works on Skoda Octavia 2 Facelift ?
@JPDC19913 ай бұрын
Hello, Do you have a link where we can order this kit compatible for a Superb 2 sedan from 2009 please ?
@pukki344 ай бұрын
On the octavia 3 its a newer model and the motor is not glued on all the way like this. Just need to remove it from the top part and better to cut with a dremel tool
@thejack014 ай бұрын
Hi, are those motors working with 12 volts or do they go under 5 logic?
@lutz64414 ай бұрын
Hard to say exactly, but I think they work with 12V
@ThePapomba4 ай бұрын
Why have not you activated “trailer” in engine and esp modules?
@ThePapomba4 ай бұрын
09:20. Pull this part up after releasing the lower part. Don’t forget to disconnect airbag cable. I would recommend remove negative battery cable. In this case you will not get an error
@Rafa-dx8ce4 ай бұрын
GREAT! THANK YOU
@bradinch15634 ай бұрын
wow what a great detailed video. i know that those are sealed bearing,but i think i would have open them and greased them and the shaft, thanks very much.
@khalidmarouan79324 ай бұрын
Hellow if hay have control crucero in my stering whel l have tu replesce the Swcm?
@pukki344 ай бұрын
No way the strut plastic cover is coming off
@geensignaal4 ай бұрын
Hello, neat work! I would implement this less difficult. The aim is to have a drive that continues to function. The ingress of moisture can probably only be poorly prevented. It may help to drill holes to improve the ventilation a little. However, I can only judge this poorly without being on site. On the motor, I would only remove the rear bearing shield so that I can get to the carbon brushes. I wouldn't push out the front bearing under any circumstances, because you can't press it back in. Normally, the front bearing goes into the stator first and then the gearwheel onto the shaft - we can't do that. If you run some adhesive oil or penetrating oil through the inside of the motor, it will not become new. But it won't rust any further either. Same for the outside of the motor. That must be enough 😉
@Rafa-dx8ce5 ай бұрын
Thank you! I will do it on my Fabia MK2
@moisesibarra9855 ай бұрын
Great wonderful video! Still driving my base Golf 2013 MK6, and love it and keeping it as new as 11 years ago. Would love to change the standard steering wheel to a GTI MFSW, however the one I bought has buttons but no harness attached to the buttons. Do you know if I can buy that buttons harness separately and which parts # is it?
@TONI-bi1lg5 ай бұрын
What mirror cover do I need if I have the lane assist camera?
@lutz64415 ай бұрын
Mirror with lane assist function is different and it’s not plug&play solution. You need to change mirror holding bracket to one that fits to this generation Skoda.
@arnoldkallos20595 ай бұрын
Hi! I have the mk3 octavia rs,the almost same struts.On the right side its not working properly..I check in the shop the new parts price are 350€/piece. What i supposed to pay for the repair?+/-
@christirut15 ай бұрын
Tiptop! Perfect! Thank you so much!
@gabbibgbv5 ай бұрын
for how long should the plastic protection be heated, approximately?
@lutz64415 ай бұрын
Around one minute.
@gabbibgbv5 ай бұрын
Thanks
@ruitorres81775 ай бұрын
Hi man. Great video. Which wire did you use? From which fuse?
@monotom9146 ай бұрын
can you provide the link to order from ali.
@abdelrahmanaboulela4546 ай бұрын
does it go with the Mk5?
@jayv56416 ай бұрын
@lutz6441 Would you know if this would work on a MK5 Jetta?
@stevenharpervw7 ай бұрын
The positive wire is acc ? Is that 12v with key on? How does it auto dim does it not need to be connected to the lights or some sensor ?
@Azanyamat8 ай бұрын
can anyone help me? I want a multi steering wheel in my caddy. 2005 1.9pd BLS
@giridhart9 ай бұрын
Can someone give me ping wiring diagram, I have to test replacement strut
@horotangergely25509 ай бұрын
Hello, have you video about skoda octavia mk 3 electric tailgate repair?
@lutz64419 ай бұрын
Most likely Octavia and Superb struts are pretty similar, so you should follow the same logic shown in my video
@ondrejkohoutek70099 ай бұрын
Does anyobody know what is the type of the rubber seal? I have lost mine 😕
@sakaross9 ай бұрын
000072549B Y20
@DibyGamer10 ай бұрын
Hi Lutz, great video. I just wanted to know how I know what number to put in the coding in my car golf 6 gti dsg thanks
@lutz644110 ай бұрын
Hi! Should be same coding as I did in my video.
@DibyGamer10 ай бұрын
@@lutz6441 thank you very much! I'll let you know tomorrow if everything went well
@Versuly11 ай бұрын
I bought a GTD mk6 multi functional steering wheel with airbag included for my 2009 MK6, Do I need to replace the SWCM and wiring harness? Or can I use my old one, I understand that I won’t have access to the buttons
@vladimirnikolovski1166 Жыл бұрын
There are the same with the 4x4 model? I meant for the tow bar
@pawe4970 Жыл бұрын
Hi, thanks for movie, great presenting 👍 I planing now instal also camera on my Octavia 2FL 2009, but I wonder what lenght version of cable choose: 6 or 8 meters from Aliexpress? Which one You installed?
@headhdi8 ай бұрын
I’ve same question.
@armaansandhu2610 Жыл бұрын
Amazing video. To the point. Just one question. I have trendline Golf. Super basic. Basic MFD, no factory Bluetooth, nothing. I do have RCD330 like yours, which works amazing. My question is, does all buttons on steering wheel work? Does Mic button work for CarPlay and Android Auto? The up down and back button on the right side, do they work? If yes, what do they do? Considering I have basic MFD, just wondering what they do.
@armaansandhu2610 Жыл бұрын
Also does the call button on the steering work? Since my car doesn’t have factory Bluetooth.
@jaroslavjira7861 Жыл бұрын
You are imazing, my hat down.
@CharlesCôté-x7b Жыл бұрын
does your paddle shift works ? thanks
@lutz6441 Жыл бұрын
Yes, they are working well!
@warwickparkinson7446 Жыл бұрын
Great video mate , can we use the module ending CQ or will it have to be the CD version. Cheers w
@somi3261 Жыл бұрын
Will the padle shifters work if my previous wheel didnt have them and my car is an automatic?
@lutz6441 Жыл бұрын
Yes, as you can see in this video, that I didn´t had paddles previously and after new wheel retrofit (also change of control module) everything works just fine.