Anyone know of a video showing changing sand on an Astral model 3 pump?
@erickrhernandez14513 ай бұрын
How do you determine what is the skimmer, what is the main drain, what is the spa etc…?
@carlhalvorsen79567 ай бұрын
Why don't you use the safety backwash feature that the Astral chlorinator has. I see in the background that's what you have. Also you just set the duration that you want so no fear of forgetting to stop the pump. When I back wash I put my hose on full in the skimmer box, so I don't lose too much pool water containing salt and other chemicals. The close position is also used when you are cleaning or changing the actual pump filters, which need to be done regularly. Another tip I can add is, if your pool fills up with rainwater, instead of simply pumping to waste, use that water to backwash and rinse. Hopefully other pool owners will benefit from the above.
@erickrhernandez145110 ай бұрын
Will it be wise to completely shut off the main drain and leave the skimmer on? Or will it be wise to leave open (completely the main drain and skimmer open?
@jeffreyjohnson92683 ай бұрын
You shoukd always pull from bith unless you need more suction if you have a manual vacuum. At a minimum you shoukd 20% auction from floor main drain
@menglandau10 ай бұрын
Awesome. I didn’t realise it had a winter mode. Thanks.
@effiepanou326011 ай бұрын
You're a life saver, thank you ❤
@MJ-yr4xs Жыл бұрын
Thanks mate nice video. Just moved into a place and have this set up. Not sure if it’s just me but sometimes the roof is reading 44 the pump appears to be running but the pool isn’t heating very fast. Any tips ?
@jaishribhajansarita2238 Жыл бұрын
644👍 very helpful information 👌👌👌👌👌👍👍👍👍👍🙏
@JasonThomson-lf1nm Жыл бұрын
Ho do you adjust the display brightness?
@doctorf7501 Жыл бұрын
Nice
@jamesnorman421 Жыл бұрын
Thank you for posting this. Our skimmer wasn't working properly since it was installed a few months ago. The door always floated too high to allow water to come in. I checked the main drain/skimmer control and found that no water was being pumped out of the skimmer which is why the door always floated above the water line. I set the valve to pump some water through the skimmer and it now works perfectly!
@colind2955 Жыл бұрын
Thanks for a great video that is really helpful and easy to follow, especially the chlorine set up
@barbaranewton1962 жыл бұрын
Does the pump need to be touched after installed by technician? It is a Viron variable speed.
@barbaranewton1962 жыл бұрын
Thank you. I couldn’t find any basic explanation in provided manual. This was clear and easy to follow.
@mattisfahani60212 жыл бұрын
Thanks
@rahkimf17482 жыл бұрын
What position am I putting the valve in when backwashing. I have this same valve that was recently installed and I am unsure
@2alsen2 жыл бұрын
Opening a pool today after court, well explained, cool reminder
@angelaflow69812 жыл бұрын
My skimmer have 2 holes one is completely close that is normal. Jeters don't have good pressure what should I do? Thank you one again 👏👏🙏
@kanxboop4608 Жыл бұрын
Buy a booster pump
@angelaflow69812 жыл бұрын
Master in this process. Very well explained 👏 👌 👍 😊 🙌 thank you 🙏
@arsenehoareau22492 жыл бұрын
Bonjour serais bien de le faire en français car en anglais
@asc968ccc82 жыл бұрын
🤘🏼
@jameszhan40212 жыл бұрын
Hi guys,My RC9 chlorinater is leaking water from the cap,Could you tell me which part need to be change?
@nataliedean78682 жыл бұрын
Hi. Do you have a video how to remove and clean the salt cell ?
@gloriaflynn82812 жыл бұрын
Great help
@Mdubs-li9mn2 жыл бұрын
Brilliant, thank you.
@GoldCoast852 жыл бұрын
Just got this system, think it's brilliant! Gold Coast Australia here
@robbiejwood2 жыл бұрын
I learnt more from this video than from my handover. Thanks.
@je23382 жыл бұрын
Thank you so much. I have the exact same set up
@michaelblack94582 жыл бұрын
I don't have any valves on those how do I tell which one is which
@nataliedean78683 жыл бұрын
Can you please advise how i turn off the acid dosing in the app for when I'm adding buffer.
@rosadeluca-tao24893 жыл бұрын
How do I empty pool?
@kenh98363 жыл бұрын
These chlorinators do have a few issues requires info from sensors that needs to be maintained and feeder tubes can fail including roller assembly also display screen after UV can unreadable and are expensive to replace
@nicholasmasters63973 жыл бұрын
Hey mate, I have one of these but I can’t get to the chlorine set point. When I push the set button I only have ph and ORP is there a way to adjust it?
@maggie62 жыл бұрын
ORP is your chlorine output. I have mine at around 650
@ic49023 жыл бұрын
Thanks; explains so much👍.
@twistoflex29833 жыл бұрын
Excellent video and instructions!! Thank you for being clear and providing all the useful information I was looking for!!
@tysonzia3 жыл бұрын
clock losing time, 2hrs a week. I have to keep resetting. Can it be adjusted?
@juicefreak19693 жыл бұрын
I learnt more from this 10 min video than a 1hr handover...great job explaining this..
@gregdahlen43753 жыл бұрын
my mom's pool man said if the water level in the pool drops below the skimmer the water then starts going out the main drain and I'm trying to understand why and this video for me didn't explain that but every video I watch should get me closer to understanding it
@ryanbedwell21443 жыл бұрын
I’m sure you’ve worked this out by now but Because if it’s lower than the skimmer it can’t pull any water from there so it can only pull from the main drain where there is still water.
@deangolding15094 жыл бұрын
What do you do when winter mode won’t turn off??
@ratpack30004 жыл бұрын
Hi new sub
@NOOTIII4 жыл бұрын
I do not have a valve to separate the suction between the MD and SK. I just have two pipes that merge to a conjunction then into the pump. Do you think I should have a valve installed?
@carolapostolos89294 жыл бұрын
Excellent info. This is exactly what I needed to know after just opening our pool for the summer. Thank you so much for this information. You're a lifesaver.
@jerry48894 жыл бұрын
My main dean is marked on the right side and the skimmer is marked on the left, do you by any chance know if they may have marked it wrong, or if it’s common for them to be switched like that at times thank you
@amandajstar3 жыл бұрын
Mine isn't marked at all! Not very helpful!
@errldabbins2 жыл бұрын
Its common. The suction side lines of the pool will be plumbed next to eachother. That Valve is then installed by the pump to control the ratio of water being drawn from the skimmer/main drain.
@2222wasa4 жыл бұрын
Also can I point out that the pressure in the filter guage was 50 kpa (~ 8 psi ) and when at approx 70 to 100 kpa 10 to 14 psi . You would not have a filter left,it would explode if you ran it up to 50 psi
@RizDaMan734 жыл бұрын
When pool is full from rain, how do I drain excess water? Thanks in advance.
@kitcho754 жыл бұрын
Get some kids to come over and do some bomb dives :-D
@robertjkal4 жыл бұрын
Turn the handle to "Waste" or you can use " Backwash"
@flamingfrancis4 жыл бұрын
Do as robertjkal describes BUT make sure pump is OFF when valve / handle is switched over. Pressure in water pipes could increase otherwise putting strain on couplings.
@tomnguyen10154 жыл бұрын
@@flamingfrancis AND once done, make sure you switch it back to filter mode or it will continue to drain your pool.
@ingenierodeprocesosgdl01394 жыл бұрын
Hi, do you have 110V version and can you send it to Mexico?
@davidjenkins75324 жыл бұрын
Thank you, this Video was really helpful!
@betsyearle13094 жыл бұрын
Thank you!! This was super helpful!!!!
@malcolmbates31735 жыл бұрын
I cant get chlorine set to come up on screen. ?? ( one to eight output setting)
@rodgeri28925 жыл бұрын
Junk, mine died after 2 yrs
@michaelpreedy58844 жыл бұрын
must have been user error. I've had mine for 5 years and no probs at all.
@kenh98363 жыл бұрын
These chlorinators do have a few issues. Feeders require readings from sensors and need to be maintained and tubes do fail and digital display can fade from UV. And are expensive to replace .