Do you need to have an active strava membership to transfer courses to your device? I'm getting pay-walled.
@bikeanddroneroamer96523 ай бұрын
That’s a great question. In all honesty I’m not sure! If you are wanting to create routes via Strava I would be inclined to say you probably need an active Strava account. In saying that I am sure there are other platforms you can create routes and import to your Garmin, including Garmin. Hope this helps
@Broadcast61364 ай бұрын
I got a stand
@simonepg61947 ай бұрын
balance needed
@wsbygt8 ай бұрын
Sweet EXP sound! How are they holding up?
@bikeanddroneroamer96528 ай бұрын
Awesome. I must admit though I am currently using the Zipp 454 NSW now. I do love my CLs though.
@uuryzc11 ай бұрын
Hi, i have 353 NSW, only thing i hate is the low hub sound :(. It was even worse when i first got the wheels, after few hundred KM sound is bit better now but still i am not satisfied with it. I don't know if i should open the hub and clean the lubrication, that will make it louder but. compromise the mechanism 😅
@bikeanddroneroamer965211 ай бұрын
If you want noice check out my Roval cl50 wheelset with a 54tooth ratchet in the hub… ridiculous noise…
@uuryzc11 ай бұрын
Yeah i did, it's loud but i don't think it's louder than my Trek Supercaliber Bontrager Kovee Pro 6* pawls 108t engagement hubs 😅
@aliancemd Жыл бұрын
You might of actually convinced me to switch to this one. I have 303 firecrest and not only is it too noisy for me but the friction on it is kind of crazy, it’s stopping itself way faster than the DT Swiss wheel/hub I had
@bikeanddroneroamer9652 Жыл бұрын
They are an awesome wheelset, they also look the part! One that is easy to recommend;)
@wooglins Жыл бұрын
The lack of sound is also great sign that there is a lack of drag/resistance. My favorite hub by far at this point is the Cognition hub.
@SrFederico10 ай бұрын
Resistance while coasting, that is. Not while applying power.
@wooglins Жыл бұрын
I am sure you have discovered by now that this hub is basically silent on the road, and also virtually drag free. Be sure to re-oil with the right stuff every 500 or so miles.
@jasonrahardja Жыл бұрын
Hi, I'd like to use the GP5000 S TR on my CL50s too, do you use inner tube? or do you set it up as tubeless since it's a TLR tyres? Thanks! and oh yeah what's the tyre size and pressure?
@bikeanddroneroamer9652 Жыл бұрын
I used STR on my CL50s tubeless all day long! The only time I have used a tube is when I got puncture that sealant could not repair! Always handy having a tube on standby;)
@bikeanddroneroamer9652 Жыл бұрын
My tyre size is 28 and would normally sit around 70-80 psi on tubeless! Hope this helps!
@jasonrahardja Жыл бұрын
@@bikeanddroneroamer9652 I seee alright thank you so much for your response, gonna buy STR + that noisy 54t today! super excited :D
@bikeanddroneroamer9652 Жыл бұрын
Glad I could help! You won’t be disappointed. Happy cycling🚴🚴
@marcuslized Жыл бұрын
Mine is similar, sounds like sth is loosen when spinning in high speed. But it run alright… just the sound is weird, and I am sending email to zipp
@rafacycle Жыл бұрын
Hi what torque do you use for the wheels ? 15nm? Because my aethos should go with 15 and the wheel spin much slower with 15nm
@bikeanddroneroamer9652 Жыл бұрын
Hi there, front wheel is 11.9nm and rear is 15nm. I would not have thought the nm should affect the wheel spin like that!
@lubistro Жыл бұрын
That noise is a decent din. My new 353s were singing out loud like they were about to fall apart. I managed to silence them so that they ride like a bicycle, not like a ferrari with an open exhaust 🙂
@JFomo Жыл бұрын
You definitely have to plan ahead when putting on the STRs. Making sure the tires are in the right direction and having all the tools ready. A sealant syringe is recommended. I did mine on the 404s in a little over 30 minutes during a lunch break. They were not fun to put on but worth it in the end.
@bikeanddroneroamer9652 Жыл бұрын
Totally agree! I still got lost as you can clearly see and I’ve got a good number of tyre changes under my belt! The STR’s as you mention are not the easiest to fit but are, simply, for me the best I’ve used..
@serkan5775 Жыл бұрын
DtSwiss arc 1100�
@bikeanddroneroamer9652 Жыл бұрын
A nice wheelset👍👍
@bonn1771 Жыл бұрын
Nice video thank you doing this
@bikeanddroneroamer9652 Жыл бұрын
Hope it was of help👍👍👌
@bonn1771 Жыл бұрын
@@bikeanddroneroamer9652 yes going after solar
@FatboyAussie Жыл бұрын
Just ordered these.
@bikeanddroneroamer9652 Жыл бұрын
That’s great, you won’t be disappointed! Enjoy
@daveated Жыл бұрын
Ta for posting... Looking for fishing spot lol.
@bikeanddroneroamer9652 Жыл бұрын
Beautiful place, you won’t have a problem finding a spot👍
@paulosullivan3991 Жыл бұрын
Great advise
@dannyli5946 Жыл бұрын
Any weird noise or small problems so far ? I have a dt Swiss arc1100, i wondering should I replace it to 454 nsw or not
@bikeanddroneroamer9652 Жыл бұрын
None so far;). Dream to cycle! Roval CL 50 are another good option with 54 tooth DT swiss ratchet replacement for better engagement IMO;)
@melvinkizungu3997 Жыл бұрын
All about efficient engagement baby !!! It's supposed to sound quiet and smooth....
@whatsuphonkycat2 жыл бұрын
quieter is faster
@cleftoftherock67972 жыл бұрын
Sounds like my DT Swiss Bearings. Nice. The sound of moving. Progress. Never quit riding. Ever.
@bobridestwowheels2 жыл бұрын
This was the video I needed, thanks for posting.
@bikeanddroneroamer96522 жыл бұрын
Glad to help fella…. Happy cycling!
@JFomo2 жыл бұрын
So they climb very well? I have the 404 and they are so slow which I put down to the weight and over greased bearings. How do the 454 perform when free wheeling? My 404 slows completely down as soon as I roll up to an incline compared to the rim brake wheels I have on my other bike.
@bikeanddroneroamer96522 жыл бұрын
Hi again;).. sounds like the 404 are not living up to their name…. I know you mentioned you have only had them for a week or so, if they are not as good as you would like could you return them? Total pain my friend I really hope you can resolve this.. I know I mentioned doing a front wheel spin but I think it’s only going to frustrate you a little more as on a single spin my wheel rotated for a good couple of minutes. Could not see any issue with it.
@JFomo2 жыл бұрын
Can you spin the front wheel? I'd like to see how much longer they spin than my slow 404
@bikeanddroneroamer96522 жыл бұрын
Hi there, I will do a video soon for you so you can see the difference👍👍
@JFomo2 жыл бұрын
@@bikeanddroneroamer9652 Thanks, my 404's are so slow. I've only had them for over a week now and they're still slow after 500kms. Already looking at aftermarket ceramic bearings 😔
@mrwezbo2 жыл бұрын
Are those the "B" model (23mm wide)? What PSI you running?
@bikeanddroneroamer96522 жыл бұрын
Hi, these are the latest Zipp 454 NSW wheelset that are hookless ready…. Running the Cont STR tyre I am running 65psi with a max psi of 73 with this tyre! Hope this helps
@normanderson012 жыл бұрын
Why is it slowing down so fast? Sounds janky to me
@bikeanddroneroamer96522 жыл бұрын
With the new wheels came new rotors…. The brakes were rubbing the disc hence the slowing down…. All sorted now though🤘
@dskordo2 жыл бұрын
I was going to say the same. A tremendous amount of friction.
@regg82ooo2 жыл бұрын
Did you have issues getting the GP5000STR on the 454NSW? Did you have to use a tire lever?
@bikeanddroneroamer96522 жыл бұрын
There were a little tight on the 454 and yes I used a tyre lever. On my Roval CL50 I actually broke one of my levers trying to get it on my front tyre.
@jms4932 жыл бұрын
On the 530 I don't need to do any of this to see my Strava route. I created a course last night on Strava and when I turned on my 530 this morning it downloaded the course automatically. I hit courses and and ride. I don't need to star them and send them over to the device manually.
@doyleyee19922 жыл бұрын
If I’m not wrong, those hubs should be silent as the magnet disengages the ratchet.
@bikeanddroneroamer96522 жыл бұрын
Hi there, Im sure to some degree there is disengagement when cruising to decrease drag however you can still here the ratchet connecting just faintly..
@doyleyee19922 жыл бұрын
@@bikeanddroneroamer9652 sounds too loud. Probably look at other videos and compare. I’m not sure but that’s what I can tell.
@gusalit50042 жыл бұрын
This Cognition V1 or V2 ??
@bikeanddroneroamer96522 жыл бұрын
V2👍👍
@davidsaporta10592 жыл бұрын
The hub disengages the ratchet mechanism when coasting so as to have less drag which is why it is quieter. It is a benefit.
@kurtik93092 жыл бұрын
milKit Tubeless Sealant From mid April - now July 2022 4500km Same Zipp & Conti (28mm). Looks like min. 300km more
@kurtik93092 жыл бұрын
milKit Tubeless Sealant 👍👍👍
@Norddin2 жыл бұрын
They sound really good. Lets forget the sound for a bit, did you notice a massive difference in riding compared to other wheels? I'm really curious about this. I checked your other videos, but it wasn't in my opinion very clear the comparison. What are your opinions now?
@bikeanddroneroamer96522 жыл бұрын
Hi there, I really should do a direct comparison between the CL50s and the Zipp454! IMO the upgrade was worth it. Is there a massive difference… I would say no. The Zipps outperform the CL50 but it’s not a massive gulf. They are lighter, more AD which makes climbing easier. If I was buying my first carbon disc wheelset (unless money is no object) I would go for the CL50 and upgrade the ratchet. Hope this helps🤞
@Norddin2 жыл бұрын
@@bikeanddroneroamer9652 Thank you for the reply. I thought they would be massive difference, specially the wind throwing you all over the places should be significantly better on zipps?
@bikeanddroneroamer96522 жыл бұрын
They are certainly better in wind particularly cross wind. If you do get them I’m sure you won’t be disappointed;)👍👍
@TankTastic2 жыл бұрын
Damn, I was looking forward to getting these. Any way to make it louder?
@bikeanddroneroamer96522 жыл бұрын
Still fantastic wheels. I don’t believe you can change the ratchet like the Shimano hubs however you can change out the whole hub if you really wanted to. Overall great wheels, great look and function the way they should. Just a shame about the sound..
@wooglins Жыл бұрын
The lack of sound is the lack of resistance. These wheels and their amazing Magnetic hub is designed to run silent when properly lubricated.
@lukas-a92342 жыл бұрын
Bruh that sounds so bad
@bikeanddroneroamer96522 жыл бұрын
Sure is! Was even quieter when I first got them…🫣
@McDonaldPhotography2 жыл бұрын
This function is available on 830 also. It’s the way I’ve synced routes. 👍. I didn’t know it had been retired from IQ though. I’m ready with the money for 1040 however might hold off a little bit to see if the 840 launches as the 1040 looks huge
@bikeanddroneroamer96522 жыл бұрын
I never knew that🤣 I was just always used to using Strava routes! I was a little unsure before buying the 1040 due to the size aswell but I was really happy when it arrived. Not sure when the 840 might be launched but one things for sure it’s not far away👍
@McDonaldPhotography2 жыл бұрын
@@bikeanddroneroamer9652 I used to use Strava routes but found the phone connection frustrating. Not sure how I stumbled on the star route option.. anyhow glad it’s worked out for you. I have a 7x so the OS seems similar on the new edge products. Let’s see the 830 is pretty. We so don’t really feel the need to drop more cash for similar features
@20yearsagotoday12 жыл бұрын
Great video. Just a quick question how have you got Courses shown at the bottom? My iPhone 11 shows calendar. I can’t see courses anywhere in my Connect app 🤔
@bikeanddroneroamer96522 жыл бұрын
Hi there, if you open your connect app then select “more” this is on the tab bar option at the bottom of my screen. Once in there (on Apple app which is all I’ve used) on the top right there is an edit option. Click that and you will see your “tab bar features”. You can delete or add different features from there;)
@20yearsagotoday12 жыл бұрын
@@bikeanddroneroamer9652 Brilliant, thanks got it now 🙂
@Radioinactiv2 жыл бұрын
Looking forward to my pair of 454 NSWs arriving at my local bike shop within the next week or so. Thanks for making this content, as there seems to be a lack of videos about these wheels and I have enjoyed you opinion on them. Keep up the good work =)
@bikeanddroneroamer96522 жыл бұрын
Thanks for the kind comment. Goes a long way👍. I’m sure you will love them🚴
@mrwezbo2 жыл бұрын
Hey mate, how have they been?
@Radioinactiv2 жыл бұрын
@@mrwezbo 11/10, just awesome! If you're on the fence about picking up a pair, I would advise you to take the plunge. They look good, sound good and most importantly perform really well. Thanks for asking! =)
@mrwezbo2 жыл бұрын
@@Radioinactiv So I type this with a new set on my bike :) they are as great as you made them sound! Did you have any issues with rotor alginment compared to your old wheelset?
@jackriley19892 жыл бұрын
Great video. Thanks for the tip on the routes. I don't really see this as an issue myself. More an improvement. Means I can select what Strava routes are in the list without having to scroll through all of the routes I've saved and made. Seems almost easier?
@bikeanddroneroamer96522 жыл бұрын
You are completely correct! Because I didn’t know this function existed until getting the 1040 I would have to work through Strava routes which now seems a pain having to select “more” to get to a saved route. I’m glad I had this problem because as you say it is far easier now to find a ride! 👍👍
@Lofi-Ace2 жыл бұрын
Is it louder in real than in the video ?
@bikeanddroneroamer96522 жыл бұрын
I would say so! It’s good for alerting people in front of you so it’s loud enough👍
@Lofi-Ace2 жыл бұрын
@@bikeanddroneroamer9652 love it ! 😄 Thanks 👍
@charlesmansplaining2 жыл бұрын
Everyone talks about how much work it is to go tubeless and most try to minimize it. I noticed it was daylight when you started by removing the wheel from the bike and it was dark when you reinstalled the wheel. That speaks volumes about the process.
@bikeanddroneroamer96522 жыл бұрын
Hi, the video was made in March and it was later on in the day when I made the video. It can get dark quite quickly where I live that time of year. Also being quite new to recording myself actually took longer getting the right angles to shoot so that was a something else have to manage. In saying that if you have never changed a tubeless tyre it could take you longer making sure you do it right first time, that was my second time changing tyres over and it took me all in 20-25 mins or so to compete the process. Not including faffing about with cameras…. The only part I didn’t particularly like was cleaning the old sealant out. All part of the fun👍
@madrabbit642 жыл бұрын
Evidently it’s a new hub because it slowed down really fast. Should have rolled at least three times longer than that. Hub is packed and it’ll break in after a few hundred miles and it’ll smooth right out. Might get louder as well. Looks great though.
@bikeanddroneroamer96522 жыл бұрын
Thanks for the feedback, I have noticed it easing up, assume, as you mention with it being new the grease in there will eventually bed in, great wheels none the less!
@popcopone51728 ай бұрын
@@bikeanddroneroamer9652 plssss if you can to make a new videos with them now after the breaking period. i want a hub thats really efficient especially when coasting too. i d really appreciate it and i bet it will help other people as is this hubs selling point.
@klebaodiretoaoponto.62112 жыл бұрын
is the durability of this tire for daily training good?
@bikeanddroneroamer96522 жыл бұрын
I suppose it all comes down to the conditions you cycle in. I’ve been training on the gp5000 TL and now the STR’s and they are the best I have used. They are difficult to get a hold of in the UK
@starlite35972 жыл бұрын
illegal bro flying over people in a crowd fly safe nice video
@bikeanddroneroamer96522 жыл бұрын
Hi there, thanks for the feedback however my understanding of flying a sub 250g allows operators to fly in the A1, A2 and A3 subcategory in the “open” category therefore permitting drone operators to fly over people and close to people with certain restrictions. With this drone(or any drone for that matter) you are not allowed to fly over assemblies of people meaning people bunched together that would not be able to have a clear escape route should there be a drone malfunction. With their being plenty of free space to move on the ground for those people is not classed as a crowd or an assembly of people. I do appreciate your concern and comments and will triple check with the ANO👍
@starlite35972 жыл бұрын
@@bikeanddroneroamer9652thanks for reply yeah maybe your right i suppose its all how many is a crowd
@bikeanddroneroamer96522 жыл бұрын
Hi there, honestly I do appreciate the feedback it’s good to always be safe and have interactions, keeps me on my toes too.. Actually, there is no set number by CAA. UAS should abide by Article 241 which is the main overriding fact that all drone pilots should adhere too;). 👍👍
@EdwardMeinert2 жыл бұрын
Dude…slick wheels. One suggestion. You should have your tyre logos line up to your valve..pro style ;)
@bikeanddroneroamer96522 жыл бұрын
Thanks bud;). Good suggestion. Will make sure I sort that for next one👍👍
@TonesDroneVisuals2 жыл бұрын
Congratulations on your Mini 3 Pro. I guarantee you’re going to love it as much as I love mine. Big Like from me 👍
@bikeanddroneroamer96522 жыл бұрын
Just need this 🏴 weather to break so I can give it a good run👍👍 happy flying🤘
@TonesDroneVisuals2 жыл бұрын
@@bikeanddroneroamer9652 Same here in Australia. Just had a break in the weather in the last couple of days!
@bikeanddroneroamer96522 жыл бұрын
Saw your videos, look really good, keep up the good work bud!
@TonesDroneVisuals2 жыл бұрын
@@bikeanddroneroamer9652 Thank you. I'm trying to improve my videos with the quality of this drone. I'm so glad to have 4K/60fps
@bikeanddroneroamer96522 жыл бұрын
Yea I’m sure you will get some incredible footage,the 60fps makes a big difference slowing footage down aswell! I’m not sure if you have ND filters available in Aus yet but we’re still waiting for these DJI ones to land. Should make for more cinematic footage👍
@mojazzz2842 жыл бұрын
It's annoyingly noisy
@bikeanddroneroamer96522 жыл бұрын
There is an 18 and 36 tooth ratchet available if you have this type of hub. They are not as noisy and offer less engagement..👍
@tbradaric2 жыл бұрын
Put some grease, it's gonna be 30% less noisy.
@bikeanddroneroamer96522 жыл бұрын
Roval grease applied 2 weeks before the video, they are just noisy ratchets…. I love it👍👍
@humzaibrahim5142 Жыл бұрын
Mine are nowhere near as noisy. Not sure what tooth rachet is fitted but is that a problem?