Пікірлер
@tinoslaponi8514
@tinoslaponi8514 11 күн бұрын
Great stuff guys! I've never seen framers "tie-in" interior walls to exterior with the top plate. I learn something new from every one of your videos. Thanks!
@LevelUpFraming
@LevelUpFraming 11 күн бұрын
Thank you for watching! Yes, tying interior to exterior is definitely extra and not required.
@a_a-lf6uu
@a_a-lf6uu Ай бұрын
Have to double back for the level
@tinoslaponi8514
@tinoslaponi8514 Ай бұрын
I would like to see you nailing protocols. EX. how many for each stud, cripple, truss, ect. Thanks!
@LevelUpFraming
@LevelUpFraming 11 күн бұрын
Thank you for watching our channel! Sorry for the late response. 2x4 studs - 2 nails 2x6 - 3 nails 2x8 - 4 and so on Short cripple studs only need two, but often just get matched to regular studs. Nailing trusses is only temporary and not structural. You either need hurricane screws, h2.5, or some other hardware to provide adequate hold down requirements. Nailing trusses is temporary, we do 2-3 on each side (trying to enter through the metal plate). The more nails you put in, the weaker the truss heal (which is not good). Stay tuned to the channel, we will be going over these things in depth.
@charlesgillen6066
@charlesgillen6066 Ай бұрын
That’s a man’s saw brother 😊
@tinoslaponi8514
@tinoslaponi8514 Ай бұрын
This is really valuable information for us Owner Builders. Thanks!
@LevelUpFraming
@LevelUpFraming Ай бұрын
Thank you!
@seanwilliams3651
@seanwilliams3651 Ай бұрын
When are you not using fire rated plywood?
@LevelUpFraming
@LevelUpFraming Ай бұрын
Different areas and inspectors have different opinions. This is what our inspectors like to see, and it works well. Same as fire blocking in a wall, it just slows airflow and therefore the spread of the flames.
@magicbox9371
@magicbox9371 Ай бұрын
@@LevelUpFraming my area is uniform and I have never cared for an opinion of those employed by the municipality
@magicbox9371
@magicbox9371 Ай бұрын
Now rip that out and give me two layers of type X
@LevelUpFraming
@LevelUpFraming Ай бұрын
Yes, type X would do the job better. But for residential construction in our area, this is what our inspectors say they like.
@jordans6965
@jordans6965 Ай бұрын
Value packed!
@LevelUpFraming
@LevelUpFraming Ай бұрын
If you got any value out of this video make sure you subscribe! We're making this type of video for every step of the home framing process!
@JL10007406
@JL10007406 Ай бұрын
Great video - I'm new to the channel but I'll be coming back for more.
@LevelUpFraming
@LevelUpFraming Ай бұрын
Thank you! Glad to hear!
@charlesgillen6066
@charlesgillen6066 Ай бұрын
First!
@masonmontalvo5175
@masonmontalvo5175 2 ай бұрын
Liam?
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Mason?
@RandomnessThatsFunny
@RandomnessThatsFunny 2 ай бұрын
please dont track the video to your head
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
🫣
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
If you got any value out of this video make sure you subscribe! We are making information videos on every step of the home framing process!
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
If you got any value out of this video make sure you subscribe! We're making this type of video for every step of the home framing process!
@DanielALahey
@DanielALahey 2 ай бұрын
Good information given clearly. Great video!
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Thank you!!
@Tyler-ol6gm
@Tyler-ol6gm 2 ай бұрын
Will use these tips when I build my own house
@001mzee
@001mzee 2 ай бұрын
Nice work!
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Thank you!
@wrdennig
@wrdennig 2 ай бұрын
I used to use powder-actuated fasteners, but only over newer slabs . . . the older slabs would "volcano" and push the plate upwards. Concrete nails are almost impossible to drive with a manual hammer. I really like the tapcon method.
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Agreed! And yes, tapcons work great 👌🏻
@wolflokie4167
@wolflokie4167 2 ай бұрын
Holmes on homes would have a plastic sheet barrier that would go between the treated base plate and the concrete floor. This was a buffer bc concrete absorbs water 💦 and even treated wood 🪵 will be damaged with water!! especially where the nail enters the wood and concrete! The treated wood is only around the outside of it and when you drill through and don’t use some type of sealant your making an easy access bridge for water to absorb through the concrete up through the nail and in to the untreated wood.
@iron3624
@iron3624 2 ай бұрын
sil gasket wiorks too
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Hello! Yes, concrete naturally absorbs water. This is why it very important to have treated lumber wherever it is touching concrete. However, basically all treated lumber is treated all the way through the board. You do not need to touch up the cut ends. The above video is a little confusing because the lumber we are using is stained on the outside. This is how the manufacture makes it, so it looks better for visible uses (like decks). But the inside (and therefore cut ends) are also treated and will not rot if exposed to water from time to time.
@Vikingwerk
@Vikingwerk 2 ай бұрын
Any tips for framing a floor over a concrete slab?
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Thank you for watching! We are making a video about every skill it takes to frame a quality house. So subscribe to see it when we post the floor framing.
@wrdennig
@wrdennig 2 ай бұрын
In my jurisdiction you can also use stainless steel nails to connect the PT plate to the studs
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Thank you for sharing! It’s good to know about stainless steel nails as an option.
@bradstafford14
@bradstafford14 2 ай бұрын
Nice video man. I'm not a carpenter, but I knew that the bottom plate had to be pressure treated; however, a lot of people said I was wrong because a foam gasket was also needed. Any thoughts about that?
@CDArena
@CDArena 2 ай бұрын
Foam gasket will help a little, but sucking water out of concrete thru capillary action is not the only problem; what about a burst pipe in the house, or dripping condensation, or water spilled on the floor, dog pee, dishwasher leak, washing machine, hot water heater.... Any water which penetrates from outside, or standing water inside will cause untreated wood to get damp, and rot or worse yet attract termites. Use treated lumber on concrete. Foam gaskets are better for preventing air leakage on an uneven floor.
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Thank you very much for the encouragement! It is not necessary to use a gasket on interior walls. We have only done that once for a customer request. Certain soil types and lot locations can hold more water, therefore it is recommended that you put a taped moisture barrier under the entire slab. Water and minerals can soak into the slab, affecting flooring, trim, and even dislodging tile. Basically if a treated plate is not enough, you have bigger problems to worry about. So a continuous moisture barrier under the slab is recommended in those locations.
@wrdennig
@wrdennig 2 ай бұрын
I've only used the foam gasket under the sill plate where a framed floor sits on the foundation.
@charlesgillen6066
@charlesgillen6066 2 ай бұрын
I also use a 5/8 bit because I suck but not as bad as the 3/4 guy
@YoDawg-v6l
@YoDawg-v6l 2 ай бұрын
don't have that problem here.. All my exterior and interior walls are 2x8 with 12 centers and 3/4 plywood on exterior and interior. Call it a waste but my house took 160mph winds and did not make a peep
@benargee
@benargee 2 ай бұрын
Yeah well not everyone is willing to spend that much. Good for you
@YoDawg-v6l
@YoDawg-v6l 2 ай бұрын
@@benargee Its not costly if you do the work yourself. My materials cost from Home Depot bid room in 2019 was $11,500 for a 40x40 1.5 story house and i still have a lot of lumber left over. My father and I did the work ourself.
@lukebiz4474
@lukebiz4474 2 ай бұрын
Why not just drill a slightly oversized hole ? 🤷‍♂️
@williameldridge9382
@williameldridge9382 2 ай бұрын
Because it affects the integrity of the board anyway. Plus, you don't have to make sure your hole is in the perfect spot. This works the same way and speeds up the framing.
@Tyler-ol6gm
@Tyler-ol6gm 2 ай бұрын
It's a lot faster and some pips leave such small amounts of wood it's not even worth it
@Tyler-ol6gm
@Tyler-ol6gm 2 ай бұрын
Another quality video. Keep them coming!
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Thank you for subscribing!
@Tyler-ol6gm
@Tyler-ol6gm 2 ай бұрын
Great content, look forward to the rest
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
Thank you!
@tinoslaponi8514
@tinoslaponi8514 2 ай бұрын
Is this allowed by code? or only on interior/ non load bearing walls? I've been scribing and using hole saws to cut penetrations, but this looks faster. Thanks!
@LevelUpFraming
@LevelUpFraming 2 ай бұрын
We only do this on interior walls. For exterior walls we just do a square notch (by plunging the circular). Different inspectors and areas call for different things.
@ferramirez4570
@ferramirez4570 3 ай бұрын
Hope you do a whole series out of this and continue uploading! Great quality! And really knowledgeable! Keep the good work! From your 25th sub!
@LevelUpFraming
@LevelUpFraming 3 ай бұрын
Thank you so much! We are actually doing every skill it takes to frame a house. It’s a ton of work, but we are over 30 videos in so far.
@spelunkerd
@spelunkerd 3 ай бұрын
Excellent summary. I like your idea to use a hammer to hold the sill seal down, it doesn't penetrate the seal.
@LevelUpFraming
@LevelUpFraming 3 ай бұрын
Thank you so much! Yes, I love that trick!
@daveskattum3508
@daveskattum3508 3 ай бұрын
This guy knows what he's talking about!!
@jordans6965
@jordans6965 3 ай бұрын
Everything I needed to know and nothing extra! Thanks 🙌