what about weebill 3 ?? did you fix the issue with locking axes ????
@jasonbrown8312 ай бұрын
Problem, Your flying in the dark the sensors don’t work in low light conditions read the manual, also clearly see in your controller the sensor are showing off, sadly this is a prime example of pilot error
@redaimellah2 ай бұрын
Before flying a drone, it's essential to clean the sensors prior to each flight.
@chevysolo21412 ай бұрын
Please at least write down a script before you start recording. Hope you’ll be able to fix the gimbal
@TellAfrica2 ай бұрын
Well, I was too frustrated to think of a script at the time. But now I know better. Thank you for giving your thoughts on this. I appreciate
@EmptyNesters242 ай бұрын
Hi there, whether it's DJI Mini 4 Pro or DJI Mini 3 Pro, during the night, the vision systems may not work due to the low light conditions, and the obstacle avoidance system may not work. Please fly with caution. Thank you.
@TellAfrica2 ай бұрын
Well, I should have known better if I spotted that side of the instruction. Lesson learned. Thanks a million for your thoughts on this. Cheers
@jablosounds2 ай бұрын
i ain’t even watch for two seconds and I IMMEDIATELY see the problem lol
@jasedrifter2 ай бұрын
it looks like an easy fix
@TellAfrica2 ай бұрын
I hope so too. I have contacted DJI and will be shipping to them directly in Hong Kong, China. Thanks a lot for allaying my fears.
@noitnova2 ай бұрын
You flying in the dark to low and you can't see your drone .Have nothing to do with DJI the blame is on you.
@intothevortex78252 ай бұрын
Flying backwards doesn't help
@vascosoares3252 ай бұрын
Obstacle avoidance doesn't work during night or under low light conditions... It also warns you when its in low lights conditions that the obstacle avoidance will not work. You should had read more about it and at least seen some tutorials to be aware of the settings and limitations of this drone.... Basically obstacle avoidances works with cameras, not sound sensors nor IR sensor, its based on visible light sensors... If there's no enough light, the drone automatically disables the obstacle avoidance setting and warns the user of it.... Next time be more careful about it.
@TellAfrica2 ай бұрын
Well, I should have known better if I spotted that side of the instruction. Lesson learned. Thanks a million for your thoughts on this. Cheers
@vascosoares3252 ай бұрын
Obstacle avoidance doesn't work during night or under low light conditions... It also warns you when its in low lights conditions that the obstacle avoidance will not work. You should had read more about it and at least seen some tutorials to be aware of the settings and limitations of this drone.... Basically obstacle avoidances works with cameras, not sound sensors nor IR sensor, its based on visible light sensors... If there's no enough light, the drone automatically disables the obstacle avoidance setting and warns the user of it.... Next time be more careful about it.
@noitnova2 ай бұрын
You are right.
@Coppersulfate90092 ай бұрын
if you have dji care this is no problem but dji can repair but it's expensive if you don't have warranty go to third party shop
@TellAfrica2 ай бұрын
The drone is barely two weeks old, I am guessing it should have an automatic warranty attached. Do you think that might be the case here
@Coppersulfate90092 ай бұрын
@@TellAfrica you should try texing their text support or sending it in for inspection but be careful since I doubt dji wants to pay for your repair that much they might argue that it's "user error" or something like that so I wouldn't get my hopes up but a gimble repair shouldn't cost that much if there's no damage to the boards judging by parts if only the gimbal Is broken with the camera core intact it should be a cheap repair like a hundred dollar ,2 hundred for a third party shop dji is probably going to replace the whole gimbal and it's gonna be super expensive a used gimbal with the camera core is like 200+ used so if they replace the whole thing it's gonna be like 400+ based on experiance
@Coppersulfate90092 ай бұрын
@@TellAfrica buttt a gimbal repair shoudnt be hard if you're good with your hands order a new gimbal assembly without the camera core and take a swing at it I've did it myself before but you need a special software to calibrate a new gimbal so try looking into the software first if it's possible
@TellAfrica2 ай бұрын
@@Coppersulfate9009 I am not sure a crash will impact the board. I have lodged a service application on the DJI website, next is to ship it, but unfortunately, no courier service ships drones out of Nigeria.
@TellAfrica2 ай бұрын
@@Coppersulfate9009 Interestingly, Zhiyun once held me by the hand to fix my gimbal whose tilt axis broke and it fascinated me how simple they made it. I did that without having to ship anything out of Nigeria. I am wondering why DJI doesn't give such support? And I am nervous if I give it a try if things might go bad.
@KentRoads2 ай бұрын
DJI repair them very cheaply if you contact them
@TellAfrica2 ай бұрын
Yes, I have done that. However, the pain in the butt is that they don't have a service centre in the whole of West Africa. The only one I found in Ivory Coast said they only fix agri-drones for DJI. This leaves me with no choice but to ship to China under ridiculous strict drone laws in Nigeria. But thanks all the same, your advice was helpful.
@OyedamolaOpawumi3 ай бұрын
Well done sir!!
@MuhammadAzhari-bw6jx3 ай бұрын
Nice bro
@user-tf8zo6zh2c5 ай бұрын
I love this🎉
@cobhamjoy19185 ай бұрын
❤
@Lifewithtemsss5 ай бұрын
Hey
@Grace110356 ай бұрын
Hi
@user-hg2oj1ci1m6 ай бұрын
Luke so Beautiful ❤️❤️❤️❤️❤️ the place
@user-zj8pi1sy9y8 ай бұрын
To tell Africa🍻....Master Editor
@Christian_ngah8 ай бұрын
What a fun
@lilianbabita92108 ай бұрын
Now this is what is godly
@BibianaSamuel-ut1yl8 ай бұрын
Wow this is Amazing🥰🥰🥰
@anointeddolapo649911 ай бұрын
Nice
@tiptrillio736311 ай бұрын
Ai retouching video
@kosifredvideos Жыл бұрын
Nice and good
@temiladeajayi3555 Жыл бұрын
Why is my video on this page please? Who is this? Who gave the permission to use this video?
@kosifredvideos Жыл бұрын
Wow so amazing
@stephanieokwe8728 Жыл бұрын
Amazing 💕💕💕💕💕💕💕💕💕💕💕💕💘💘💘💘💘
@princessmmasinachi825 Жыл бұрын
❤❤❤❤
@princessmmasinachi825 Жыл бұрын
❤❤❤❤
@nkennaya Жыл бұрын
How the two songs blended👌 Never be caught off guard. 😇
@sarahokali9851 Жыл бұрын
Kudos gal💃👍
@vinitaahuja9379 Жыл бұрын
Wow qmazing
@emekakalu7412 Жыл бұрын
Nice vocals
@becomingessence5167 Жыл бұрын
Weldon Bro,you came a long way.i tried critiquing not possible.
@prestigeimagery89452 жыл бұрын
Africa 🇳🇬
@prestigeimagery89452 жыл бұрын
Amazing 👌 vlog
@kellybrown8372 жыл бұрын
Nice one my sister
@emguralllagu79782 жыл бұрын
Good one
@TellAfrica2 жыл бұрын
Thanks buddy
@hussainrabiu34252 жыл бұрын
Amazing work sir More grace ✌️💯
@TellAfrica2 жыл бұрын
Thanks mate
@becomingessence51673 жыл бұрын
How do you ask a question that gives credit or appreciation to the president who is part of the poor state of Nigeria
@glorialopeo45624 жыл бұрын
So inspired. I like it
@TellAfrica4 жыл бұрын
Thanks Gloria, my number one fan all the way from Guinea... Your loyalty is much valued. Stay glued
@Hair_affectionist4 жыл бұрын
Amazing
@TellAfrica4 жыл бұрын
Thanks a lot Olivette
@dr.raymondobajichsp55094 жыл бұрын
Nice concept though no quotes for words on marble. Was it targeting at the youth population? I thought it should cut across.
@TellAfrica4 жыл бұрын
Hi Raymond. First know that your comment is being taken to our treasury of comments so highly valued. We were put on the spot by our client at about 4pm when we were already losing light and this video is a day video and so we didn't have time enough to sample opinions across age levels and professions the video would have been a lot weightier than this... Everything happened based on available gadgets and all and as pro filmmakers you have to prove your worth notwithstanding... So we went creative...I shot for hours hand held and an improvised mic... But I'm happy I'm getting the reviews we have so far...it goes to tell how much our audience care about the stories we passionately create for this platform... Please expect improvements based on everyone's concerns. Your comment is in our treasury of gold. Thanks a million Raymond
@strangeenergy_4 жыл бұрын
Incredible work👌
@TellAfrica4 жыл бұрын
Your comment is treasured
@okunetakim99334 жыл бұрын
Give us OWAN as Governor of Cross River State for a rescue mission.
@_skinillustrations5 жыл бұрын
Content and clarity of this video is on point. Keep it up