Thank you I'm in the south of my heat pump started doing this for the first time overnight. I am fortunate enough to have one at gas fireplace in the house but knowing I can use the emergency heat at least overnight is very reassuring. It saves me from calling for a service visit on a holiday and paying extra

Rf, if you can afford it....

Hi my media update 51.00.350 I can upgrade to new update

Good information I didn't realize there are two different kinds of filters I got the 3x one now I know why it was not fully dripping mine was way to slow I took it out rinse it and shook it vigorously now the water flows nicely.

My Gen 3 has never broken, however I did have it rebuilt in 2007. I plan on having it rebuilt a second time just to renew whatever is needed. I don't think I could ever take it apart and get it back together myself. It has been a wonderful machine.

Hello. What is different between option Speed toggle and LVDS speed toggle?

Nice ol ford truck in the back ground

In case you have heated mirrors, I suggest using silicone tape. It's heat resistant. The 3M foam stuff is not.

Why must they make updating software such a crackjob ?

That was painfull

That take down pin is designed to fit the base of a .380 round. The feed ramp of LCP have lateral machining marks. I use 600 grit paper wrapped around a 1/4 inch wood dowel. After a couple strokes with the 600 grit I use a Demel tool with polishing compound to polish the feed ramp.

how bad is the buffering in the rf?

Bro, can you help me? I followed these steps, but this time the touch screen, that is, the bottom part of the screen, is not working. How can we fix the problem? Do I need to do calibration or something?

Just did it under an hour on my 2017 cx9...thank you very much

Is this the concrete without rocks in it? Just pure concrete.

When I did this and then stopped the car and turned it on, the screen went black and it no longer works... it has become blocked... the radio works but the screen is black.

Those are knock off mazda filters. The real ones are made in japan or made in tokyo. Only!!! Your buying phoney knock offs. Ive been buying mazda vehicles for long time. Got a brand new 25 cx50 right now. I kno what im talking about. Just want u to know. ✌️

Great video! Fixed ‘er right up! I’m king for the night in my house! 💪🏼💪🏼💪🏼

What is max SD card capacity

hi! at 3:57 you mentioned a way to use the touchscreen while on v74. is there any followup on that? thanks!!

I have this video saved in my favorites because about once a year I refer to it cuz I can't remember how to do it. But thank you for a very concise perfectly done. How to video

Completed this job quickly - thank you on describing how to do this without pulling the dishwasher out. My pressure sensor was full of junk. While you’re under there, clean out the turbidity sensor too - mine was dirty and added unnecessary time to the load (a 120 minute cycle had 30 to 40 minutes added to it).

I can’t see how you can read a voltage between a fluid and earth. If you had been reading a certain resistance I might have been able to understand the technical reasoning, but as an electronics tech I am quite sure that your methodology is flawed.

when I turn on the car, the screen is completely black. The system still works in the background (e.g., the radio plays), but the screen doesn’t display anything. I’ve already tried disconnecting the battery and waiting for 20 minutes, but if this doesn’t work, I don’t know what else to do. Could you, or anyone here, please help me figure out how to fix this? I’m stuck, and I don’t want to take it to the dealership unless it’s the only option. Thanks in advance!

This was useful, many thanks for putting this together!!

This approach also works on OS Version 74.00.312 on my 2022 MX5

Good job Lisa! 🤩

Nice video sir! 🙏

Grown ass man owns a masda come on dude

Thank you very much for your help my man👊🏼

Does it work for mazda 3 2014?

Tried just yesterday on my mazda 2, firmware rev 74....now the mazda infotainment works fine, but android auto is still not working in touch mode....any ideas? Thanks

Good review

Yeah my unit outside froze and it was making buch of noise sinse the blades had ice built in

Men, your video was so easy to follow. Thank you very much, one love blessed love always 🙏. Yah man Jamaica 🇯🇲.

I've never switched to em heat just heat only m I tried on time doing it out of curiosity but a fuse blown when switching to em heat.?

thanks man it worked great on my mazda cx5 2018 touring. Keep in mind, the USB most be on FAT32 as you said not exFat, therefore, USB should be below 16G in otherr to get the option on windows 11 to reformat into FAT32 !

I'm in Fort Worth Texas and we are on our second or third day of 30° . The house has been at a steady 62° even though the temp has been set at 78, well 85 now is what I said it at before looking into the heat pump thing.

Super. Thank you very much for detailed steps and guide

Did you buy the warranty with this unit or no?

Of course I pulled my dishwasher and checked the drain line and it was clear before checking YT. This did the trick. A million thanks to you sir!!

I used this to update my Toyota Yaris 2019 infotainment system from version 59.00.573 to version 70.00.100. I encountered a problem where now the boot animation/logo changed from the Yaris Logo to the Mazda logo and the background color changed to red, before it was blue. Is there a update file specifically for this model and if there is, where can I find the file? Also, Is there any way to revert to my previous OS Version? The reset to factory setting option is unavailable/unselectable. Please help!

Thank you SO MUCH for this video!!!I wouldn't have been able to figure it out without you posting this! I am so grateful for you!!! Funny side note and new issue - I don't know what I did during this process, but after I put my vacuum together and turned it on drive, instead of propelling forward, it is now propelling BACKward. 😅🤦🏽‍♀️ What did I do?

Does it work on a Mazda 3 2014 ?

Hello, the part that you show us at 18:56 is present only in Mazda 626 models? I have a 1996 Probe 4 cylinders but I can't see that part. Thank you and excellent video.

I have an adjustable plier oil filter wrench. I do not need two hands to either start removal or taking wrench off the filter.

Awesome!!!! We tried the sameway. thanks a lot!!!! It's working now.

You didn't show how to fully put the gear shifter back together

During defrost, where the system essentially runs in AC mode to clear the outdoor coils, the heat strips come on automatically to temper the cool air until defrosting is completed. If you have gas available, IMHO as an HVAC pro, you should consider using natural gas as the defrosting or supplemental heat source. Depending on cost, propane may also be a good choice. Natural gas is much cheaper than heating with electric strip heat, unless you have a large battery bank charged by solar panels. Using gas or oil for supplemental is called a "dual fuel" system. A modern T6 stat is capable of controlling that setup, along with several other modern stats. HTH.

Can u please share a link to download the update file 🥹 i can’t find it