Buen Trabajo!. son muchas Btaerías en Paralelo, como las proteges de un corto o Falla de alguna de ellas? Saludos.

Hey Rodney, did you build the powerwall or did you quit? People interested in watching how it went! Thumbs up for the project!!

Good job good information

Yer pressing too hard. light press = more resistance = more heat = stronger weld

where you gone, upload new video how you baterry 18650 ?

Please I need some batteries.. From Nigeria

Comintment!

Man if you have so much time then don't waste others time

2 minutes and 10 seconds to tell us how many batteries you have. What a waste of time. It's people like you that turn youtube into crap.

hi... did you finish the powerwall? did it work? or were there problems? I'm just now collecting and processing 18650's and researching the best way to go about it. ty for sharing your experiences on youtube

Hi friend I also made a 24kw 18650 wall Curious what you have set as parameters in the inverter such as Bulk Voltage float Network return Voltage Cut Off

Hi great build. Tell me when you buy one of the Boston Power battery packs how many cells is that as they come. Can you use one of them as a power wall the way they're manufactured?

The energy you put in the project, you are going to get thousands of times back,,, great videos,, a master of power,, 💪

Where’s a good place to learn the math and basics of this? Looking into a schoolie conversion with a hefty power setup

Thé part two 🤣

Nice quantity. I am trying to do something like that too. Looking forward to start a channel of my own and do this

I got an entire 57kwh battery with these modules. I got 4 sets of 3p4s hooked up. Ot two more to hook up but waiting on 2 more BMS modules. I connected them to my existing 20kwh Fiat 500e battery. I'll be making a video soon

What a nice setup! I'm working on an 18650 system using 8,000 batteries. I'm still breaking down the battery packs I bought.

bit late but this is nuts I must say :) I went with Eve 280ah Lifep04 batteries, 48v 15kwh. JK BMS, done in a few days.

Boa tarde tenho um banco assim de 24v 29,5 kwh

Where can I get affordable cells in South Africa they are so expensive 😭

isn't a beeping from the kweld and indication of a bad spot welded??

I just bought one of these because I really need to stop soldering my packs. I'll be running it with 4 gauge ofc battery side and I'll be running it off a 650 amp constant starting battery. I'm gonna see about changing the welding leads out to 8 gauge ofc. But I'll be stuck using the tips it comes with but I'm sure itll be fine. I'll let you know how it goes!

Dude, this is „sikh”

Impressive amount of batteries you got there. Now imagine how only 1 of them can ruin everything if get faulty or get shorted somehow.

Wish there was a good spot welder for around $100.00. These cheaper units are not up to snuff.

Hello Rodney, Please if you could help me with my question, I have bunch of laptop cells, mixed ( ICR , INR ) and planing to DIY 3S pack for solar. is it okay to mix ICR and INR Li-ion??

You're just rambling without any sense. Make your point.

I wish you would just get to it

Have you tryed this welder with .2mm

And part 2 ?

Don't buy from CNC deals5. Didn't work at all $15 for nothing crooks

Mine did same. DEAD $15 GIFT TO CHINA BS

I'm the safest guy I know Hmmm

I'd make one first

Not the best but for couple coins Better than a $100 waste of American dollars. MY HUMBLE OPINION. this stuff is addicting. Don't waste $$$$. Unless you have a business don't buy Arduino. TYPE welders. Fool and his $

I have a couple. Watching these videos. They had me FIRMLY believing they don't work. HEADS UP. this one and other $15. Work fine w at least 150 to 300 amps. DONT BELIEVE THESE PEOPLE. MEDIA SELLS IT. AND YOU LIVE THE ROLE. OZZY LOL

can i use 18650 batteries to input of this thing?

You need a regulated power supply I made one from a 5amp 12v transformer to a buck boost converter to 14.6 Volts and works perfect on the med setting

Hi! Can somebody tell me what kind (type) of Moffett use this welder? Because I just burned one, at the very first weld...

Did you get the Growatt installed and working with 63kwh pack?

u can spot weld up to 0.3mm pure nickel strip or double stack 0.2mm pure nickel strip like nothing. Any cheap Chinese spot welder( at least 5 mosfet) will work. People just don’t know how to use it!

you're not supposed to take it to 50 you'll burn up the mosfet

I would like to know the failure percentage the failure rate of the spot welders I bought two of them was just under $17 each both were failures they werenew I got a refund.... but I just wanted to know what the failure rate and there are many many different versions of the same spot while they're all over the Internet varying from $8 all the way up to $80 maybe it's just a different mosfets or something but mine had a bad switch I think I don't know it just started firing right off the bat it didn't even give me the beeps and the other one smoked I had 6s 12 volts so I would like to know the people that have had these a lot of people who like them really like them and a lot of people who say they're junk really say they're junk and some people make modifications I would like to know exactly what's going on with these little welders

22:38 bad battery choose, low discharge battery recomended high discharge or High cold crank battery like for car

love the segway at the beginning. Nice editing!

This was his last powerwall video, what happened?🔥🔥🔥

Imagery of giant piles of 18650 batteries in a house fills me with anxiety. My dad was a firefighter and I grew up on his "interesting experiences" with accelerant-involved house fires

Instead of prying it open, try cutting through the stickers on both sides with an exacto or similar blade. Then you can hold the battery in a vise and just push it open with no problem. I did a video on this. The ones I have opened have contained mostly LG cells and they are the most difficult to get the cells out due to the amount of adhesive they use. The Sony and Molicells were the easiest to get the cells out.

I realized I somehow wasn’t getting new videos and checked in to see. How’s the project going? Any updates coming soon? I’ve been traveling so haven’t had any time to work on my project after testing and sorting 20kwh of cells. I’m looking forward to taking them next steps on mine as well as seeing your progress!