thanks so much po!!

sa pagkakaalala ko po yes, 4pin na pabilog

check ko po s mga origina footage ko if nakuhanan ko

anong model year po?

@@carbitstv 90s-00s po ata, civic sir

so true.... and if ayempre dapat din ma ensure na lagi may charge hehehe. so far andami ko na najumpstart using that.. 😅

@@carbitstv sana naman kasi babaan nalang nila.un carjump start na yan para naman un mga gusto bumili magkaroon din naman pde din ba kaya yan sa mga diesel?? Like van

Yung internal kasi it requires a lot sa installation. I think this is one is the quickest way to have a monitor system sa air pressure. as for the valve damage, so far oks naman sa akin.

Thank you so much 🙂🙏

Salamat po 🙂🙏

Thank you din po. 🙏🙂

black screw lng po, pwede naman i nut and bolt kaso lng if ever lng masabit ng malala yung chin, posible mag cause ng crack sa mismong bumper

@@carbitstv bka pwede kayo gumawa sir ng video kung pano tangalin yung rear bumper

@@jaychanu yes, pwede po, thinking of installing something there . :) soon po

either mahina na po batt or defective sensor, possible din defective monitor unit

yes isa lng po (na maliit pa hehehe)

same lang po cguro, most cars naman have similar chips and internals ng keyfob na pwede ilipat as long as yung lilipatan na fob is compatible

Hello po, unfortunately, the shop discontinued providing audio services na.

Good day po. kay Fremuff Performance Muffler ko po pinagawa. Sa kanila na lahat, muffler and installation: facebook.com/mgmfremuff?mibextid=ZbWKwL

salamat po sa pag support sa channel 😄 check nyo po dito: s.shopee.ph/20cxefo5D6

hindi ko pa po na try (wala kasi may diesel car sa lugar namin) pero alam ko as long as may OBD port yung sasakyan, it should work. some parts ng gauges may not work correctly if not applicable sa sasakyan.

up untill now nakainstall pa din, no further issues experienced

not really, its in Tagalog, do you want me to put captions?

🎉Thanks

shopee po: s.shopee.ph/3q4T0YWSTr

yung shifer naman po is universal provided ba similar mechanism kng paano nagwowork yung shifting nya.

those fuses serve to protect the wirings in case of electrical short. will prevent further damage.

@@carbitstv okay if i don't have that two fuse instrument, then how do i connect another 10amp fuse? before or after the original fuse? As I'm going to install door lights, welcome light

@@zaifkhann the fuse tap that i used will allow you to put 2 fuses in 1 slot, 1 fuse will protect the original fuse, the 2nd will protect your welcome light. Fuse tap is the most efficient way to do it but make sure there's a fuse in between the original fuse and the welcome light

@@carbitstv okay last one, what amp of fuse should i use for welcome light? Should i use 2nd fuse same as the original fuse?

@@zaifkhann same would be fine (10amp)

sa akin nakasagad wala naman issue, if nakakakuha ka naman ng reading kahit hindi sagad ok lng, basta make sure nakalock para hindi kumalas yung sensor

Yup feel free to browse YT as it has wide range of installation instructions :)

yes

Auto off naman po sya pag patay na engine.

@@carbitstvpaano po install Pls

@@rcsunga8867 this video should tell you how, but if you want another video you can watch my original install video here: kzbin.info/www/bejne/hJmUqKKYi9d4q7s

@@rcsunga8867 locate nyo lng po OBD2 port nyo, plug and play na po sya dun, diskarte na lng sa pagtatago ng wires

yes, as long as it has OBD2 port

wala pa po. hindi pa din ako nakakapagpalit 🙂

@@carbitstv thank you, sir. sana mavlog mo po pag nagpalit kana :)

@@markcariazo926 soon po. Salamat

thanks po 😄🙏

hindi na po, nagpa retrofit na po ako (projector type) pero mga 2yrs ko din po gamit yan

@@carbitstv ah ok sir. So sa retrofit pala may sarili din silang led bulb na gamit. Thank you sa feedback sa novsight!

yes meron po. Please keep in mind na hindi nya kaya i-totaly seal yung mga leaks baka need po talaga irepair saan man galing yung leak nga sa roof. pero pwede nyo po itry ito: s.lazada.com.ph/s.mXsGT?cc

meron po pinipihit sa likod, you can check my projector Foglight video andun po yung itsura ng pihitan

Salamat po 😄

thanks po lodi 🙂🙏

WD40 po 🙂

@@carbitstv ty po

sa pagkakaalam ko, left-right po

@@carbitstv tnx boss dan

Thanks po 😄🙏

Axle back lng po... soon ppa full exhaust din ako hehehe

@@carbitstv magkano inabot? Axle back ba ung sa dulo lang? Canister lang kumbaga db?

i suggest sa shop kayo magpalagay, designed sya sa OBD2 baka kasi with the converter, hindi sya magfunction ng maayos. pero sana po gumana :)

online po pwede po dito: s.lazada.com.ph/s.OA5E8?cc

not sure pero pwede po cguro ito s.lazada.com.ph/s.OA5M6?cc

regular cleaning din. hindi na po bumalik mga makukulit. instagram.com/reel/C7cSo6AyUh2/?igsh=MTJzeDBkeXAxMjhnaw==

wala pa sir

for the Headunit, wala pa yata, meron ako paano baklasi yung panel, andun sya sa video ng Gauge

i'm not 100% sure, get picture as reference na lng po cguro, and take note po need mo ng cover na may butas para mag fit dun sa led

anong note po? same brand po ba? iba iba minsan kasi yung interface ng main controller