Do you know what improvements or changes comes on this update? Can't find detailed info, thanks!

Awesome video!! Is this in the Beaver Lake in western Arkansas? I wonder where all the fishes are???

The bass and watersnake hunting crawfish together is WILD!!!!

I have the guardian and my wife has the spectrum. We love them. We got a couple of our friends to buy them.

Can I wear wetsuit and dive gloves and dive hood and dive boots and dive fins and dive mask and scuba tank and bcd and regulator to breath from and breath underwater with scuba regulator for warm water diving

What is model/brand of the thread checking tool do you use?

👍🇬🇧

Trop de nœuds, trop de manipulations...

Can I wear wetsuit gloves for warm water diving

can a fit in a 350z convertible?

Any link to that folding snorkel?

Helpful, thanks!

Very professional and simple plus educational You mention that the Hydro test is every 5 years Unfortunately In Australia the most over governed over legislated diving industry in the world I am not sure if it is the aim of the government to destroy the recreational diving industry in Australia Many dive shops are closing in Australia not due to safety but excessive bureaucracy I personally have been a Dive Instructor since 1983 I no longer teach diving in Australia I am sure the diving industry in America is as safe or safer than Australia Its a shame we have great diving If you are interested to see what we dont want for the diving industry in other parts of the world have a look at To show you how absurd this legislation is A recreational SCUBA Instructor must have a Commercial Diver medical form a dive physician Imagine if you had a dive school like I did with 50 cylinders and they have to be hydro tested every 12 months plus an eddy flow test For reference www.worksafe.qld.gov.au/your-industry/diving-and-snorkelling/diving-laws

Too slow... most SMB and DSMB deployments are done for a reason...

Every time I come to tie something to a bolt snap, I find myself coming back here to make sure that I do it right. Well demonstrated, clear video. Cheers.

I watched 3 or 4 videos and yours was recorded from the best angle, best audio and with consistent focus.

I am about to start my DMT, and this video was exactly what I needed. Easy to follow. Thank you!

Excellent, I learned a lot. Thank you.

Great video, thanks 👍

Great video. Thanks for sharing.

Thanks to your video, I've decided to buy it. Thank you

'obviously these are not mine because they are turquoise' fragile masculinity has spoken

Good vid. Where are you located?

No clothing?

AI is trying bolt snaps now? AI really is going to take all of our jerbs.

Been using the same Air2 for 16 years. 800+ dives on it. Yes, I service it and it breaths well enough and always works when I test it. Have been in a situation to have to use it zero times, I use a high quality SP regulator system and don't dive with idiots. Pros and cons with everything, including Air2.

There are no pros to the AIR2, there are only cons. 1: There is no easily identifiable air source for the out-of-gas diver. 2: In order to deflate the BCD, you need to take your emergency air source out of your mouth. 3: You now have to donate your primary, which is on a shorter hose than your octo. 4: It's a lot more expensive than an octo. 5: Because it's attached to your corrugated BCD hose, your head movements are restricted. 6: It doesn't breathe as well as a normal octo. 7: The AIR2 is permanently attached to your BCD, not to your first stage regulator. When you take your regulators for service, the AIR2 is often forgotten. That increases the risk of it failing when you actually need it. It's a solution without a problem, and it makes things 10x more complicated in an out-of-gas emergency. You've got a panicked diver looking for a usable air source, can't find one, and will yank your primary out of your mouth. Now you've got to look for your alternate air. You find it on your left, put it in your mouth, and now you both need to make a safe ascend. As you ascend with a panicked diver in your face, you'll need to deflate your BCD, and every time you do you need to take your AIR2 out of your mouth. Get a normal octo. It's cheaper. It gets serviced with the rest of your regulator set. In an emergency the OOG diver knows what to reach for. He can keep a reasonable distance away from you, and your inflator/deflator works as expected. ---- If you're going to get into TEC diving, get a long hose setup. This takes a little extra time to set up, but is a major improvement over a normal octo. Your primary is on a long hose (150 or 210 cm / 5 or 7 ft). Your secondary is on a short hose (55 or 65 cm / 2 ft) on a bungee necklace. The primary long hose is routed under your right arm, across your chest, around the back of your neck, and into your mouth. You do have to take care that it doesn't get trapped under other hoses or gear, so it's the last thing you route before entering the water. In an OOG emergency you will donate your primary, which is on a much longer hose than your octo (90 cm / 3 ft), giving you a more comfortable distance from the panicked diver. You then switch over to your secondary, which is under your chin. This has the benefit that you're donating a regulator you know works. You've been breathing off of it. If you're using a 210 cm / 7 ft long hose, the OOG diver can even swim behind you without getting kicked in the groin or the face. This is the most expensive option of the three though, since you need to buy an extra normal second stage, replacement hoses, a bolt snap to stow the primary second stage, a bungee necklace, and possibly something to tuck the hose under when you're routing it. That could be a canister battery, a dive knife in a sheath, or a hose retainer bar. Cheapest and standard: Octopus More expensive and a bad idea: AIR2 Most expensive and most versatile: Long hose

Tomorrow will buy my first SCUBAPRO DRY. Happy to see this video :)

No fog? SOLD!

I was able to personalize my G2 over Bluetooth, the only item I couldn’t change was the start up picture. I can upload pictures to the G2 but haven’t been able to apply this change.

Thanks

nice review.. do you the Go sport can handle current situations for Recreational diving ? Thanks

Which standard do you apply for hydrostatic test?

At my hydro testing facility I’m testing about 1,000 cylinders a week

Love the Guardian and bought two.

this dude looks like he shoves these bolt snaps up his butt when no one is looking

Hi Does that mean you cannot manually inflate bcd with air 2?

Hi, This is by the best video comparing different 1st stages of scubapro. Thank you for that. I am considering to buy MK17. However, I have found 2 options there, MK17 and MK17 Evo. Is there a difference between them? Since their Evo line up mainly means the blue coating preventing ice build, how would they do that in a diaphragm design when it is already sealed? Also, if MK11 is also diaphragm design, doesn't it inherently make it sealed? I would greatly appreciate it if you could answer those. Cheers

👌🏽

water is used because air/gas is compressible.

The hydrotester is my dad lol

I tried another video just before, the knot was loose, this one is perfect thx

Hi ! Could you please repeat the reference of the first tool that you are showing at 4:42 min ? Also, what are you using to attach it to your regulator ?

Spit in it, rub it around then do a mask clear when you jump in, works fine and cheaper.

how to make it not dangling around when clipped though

if you bring the bottom ends back through the bolt snap when initially securing the tie you get the same knot without having to go around the bolt snap lol. Wish I could post a pic/vid to show

Great review!

Two other nice things about the X-Deep bolt snaps.. 1. Line can't get caught on the lever. A standard bolt snap has an opening that a line (reel line, fishing line, etc) can get hung up on. 2. The X-Deep snaps are thinner at the snap opening and that allows you to clip it to the reel as many divers do, without having to remove as much line from the reel when it's new. Added to everything you mentioned these are awesome snaps!!

Awesome!!!!!

This is EXACTLY how it should be done - Thx