Пікірлер
@tedslife7086 2 күн бұрын
Hey did you install a LED flasher?
@RedRocket64 2 күн бұрын
@@tedslife7086 yes
@rubencortez8184 4 күн бұрын
How do you take off the drip rail I’m haveing a hard time talking it off
@JacobGonsales-z9b 6 күн бұрын
Thanks for this brotha! Sorry if this is a dumb question I would seal the windshield then replace the chrome correct? For front and back? Both windows are leaking and I might as well do the chrome. Any info is greatly appreciated.
@ScottSacchi 6 күн бұрын
that accelerator pedal is interesting. Must be an LS thing,
@RedRocket64 6 күн бұрын
Yes, electronic pedal off a 2018 Camaro 👍
@ScottSacchi 6 күн бұрын
Good detail, not too long at all. I am doing Classic Auto Air, but I personally think every little bit helps.
@lowridercoloringbook 8 күн бұрын
Hi! I just watched your video of the Red rocket 64-frame. I saw that you used a rotissery when you wrapped that frame, with the 59-frame you got it on jack stands. Wich way do you recommend?
@RubenHernandez-tx9dg 14 күн бұрын
Can you explain on the little stainless piece on the door by the little window does that piece go on first then the longer piece thx
@MijosJamz 15 күн бұрын
Beautiful ride! Great work!!
@RedRocket64 13 күн бұрын
Thanks a lot!
@henryherrera7250 19 күн бұрын
Just got my dual antennas same ones for my 1970 impala, Can’t wait to put them on! Thanks for sharing.”
@SaihtamEseiw 19 күн бұрын
Von vorn sehr langweilig, dafür ist das Heck interessant. Die zu kleinen Räder sehen nicht gut aus.
@CarlosAbrego-we7sd 20 күн бұрын
Man, Awesome. You make it look so easy.
@RedRocket64 13 күн бұрын
I appreciate that!
@1967grimreaper 21 күн бұрын
What did you have to do the transmission tunnel?
@RedRocket64 21 күн бұрын
@@1967grimreaper I didn’t do the work on this tunnel, it was raised/modified to to make room the 6L80, pretty big tunnel. You can go with a 4l60/4l65/700r4 if you do not want to modify the floor.
@1967grimreaper 21 күн бұрын
@@RedRocket64 I have crate 6L80 already so going to use it. Going to go a different direction with my Z/28.
@robertnowak7184 21 күн бұрын
Man huuge help.. I’m about to start cutting
@david_at713 25 күн бұрын
Quick question did you have to do anything to the rear end like shorten it? Or just the standard stuff?
@RedRocket64 25 күн бұрын
@@david_at713 Didn’t have to shorten, just welded deep cups on it to hold coils 👍
@unknownnick6672 27 күн бұрын
How did you install them. I’m curious what that connecter plugs into
@RedRocket64 27 күн бұрын
They plug in to the stock sockets, plug and play at its best 👍
@stevemendoza8580 Ай бұрын
Your the man.. i always look forward to seen all your content..
@RedRocket64 27 күн бұрын
Thank you sir 👍
@leechristo6263 Ай бұрын
Hi Johnny, Just finished watching all your videos on the 59 build. You are doing an excellent job and I have been motivated and inspired to keep pushing on my own build. Looking forward to following the progress and completion of this fine resto. Much respect from Australia 🇦🇺
@RedRocket64 Ай бұрын
@@leechristo6263 Thank you for the support, it’s much appreciated, some days it’s hard to find motivation, writing my goals down has been a great tool for me lately, it’s fun to see the items checked ✔️ off as I’m going, be realistic with your goals and remember any progress is good progress 👍 Shout out to all the builders down in Australia 🤝 ✔️
@DarylWhicker Ай бұрын
Nice 64! What type of screws did you use to install the top of the door stainless belting? I had to grind mine off years ago.
@RedRocket64 Ай бұрын
@@DarylWhicker Thank you, I used tiny stainless self tap screws.
@loniecruz9824 Ай бұрын
BOXSTATE719. PUEBLO COLO. GREAT WORK VERY IMPRESIVE. GREAT JOB AS ALLWAYS HOMIE.
@aurktman1106 Ай бұрын
Looks gorgeous!
@RedRocket64 Ай бұрын
@@aurktman1106 Thank you! 👍🤝
@edgrabski1390 Ай бұрын
NO STANDING ON CHAIRS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! EVER Nice job on the cleaning, just a pain and many hours of work. Raptor with the Paint mixed in makes it kook GREAT 🙂
@RedRocket64 Ай бұрын
That chair is fairly wobbly 👀 😂 Thanks Ed, way more to come, I’m ready to paint this thing 👍
@edgrabski1390 Ай бұрын
Can't wait to see it in paint 🙂
@RedRocket64 Ай бұрын
@@edgrabski1390 Its coming soon 😎👍
@aurktman1106 Ай бұрын
I did the same on my 57 Chevy, but left it black. You made it look awesome!
@RedRocket64 Ай бұрын
I love them 57s! Thank you sir ✔️🤝
@kobra_style Ай бұрын
I feel you on that undercoating. That crap was heavy on my 61 and it took me days to get it off. What a pain in the ass.
@RedRocket64 Ай бұрын
@@kobra_style man! I hope I never have to do that again 🥴
@HectorPerez-yp2mi Ай бұрын
Looks really great brother
@RedRocket64 Ай бұрын
Hector, thank you sir 👍✔️
@HectorPerez-yp2mi Ай бұрын
Tham Johnny u got down brother
@bmxbobby1 Ай бұрын
Graat Work !!!
@RedRocket64 Ай бұрын
Thank you 👍🤝
@lewissmith2136 Ай бұрын
Nice work brother
@RedRocket64 Ай бұрын
@@lewissmith2136 Thank you, more to come 👍
@RedRocket64 Ай бұрын
@@lewissmith2136 Thank you, more to come 👍
@neuyen001 Ай бұрын
nothing but fire boss. you doing it lovely
@RedRocket64 Ай бұрын
@@neuyen001 Thank you sir!
@frankyfrank6387 Ай бұрын
Nice work.... From KZbin it looks like primer can't see the silver but in person bet looks alot better 👊🏽
@RedRocket64 Ай бұрын
@@frankyfrank6387 Thank you, yes, hard to catch silver raptor on camera 🎥👍
@big_vgv Ай бұрын
👌👌👌👌
@RedRocket64 Ай бұрын
@@big_vgv Thank you sir 👍
@diytypeofguy6502 Ай бұрын
Wut engine u going with
@RedRocket64 Ай бұрын
@@diytypeofguy6502 Gen 5 LT, 6L80 transmission
@david_at713 Ай бұрын
Awesome work!
@RedRocket64 Ай бұрын
@@david_at713 Thank you 👍
@davidprokell7664 Ай бұрын
I can’t wait to see this one finished. Great work as always Johnny!
@RedRocket64 Ай бұрын
Me either! Thank you sir 👍✔️
@jamesbarnes7045 Ай бұрын
Amazing work either way
@RedRocket64 Ай бұрын
Thanks!
@jamesbarnes7045 Ай бұрын
Just curious why not have a sandblasted it would save you so much work
@RedRocket64 Ай бұрын
Can do that at my house and Would of been more work towing this thing around to get that done, I’d rather put in the work 👍
@jamesbarnes7045 Ай бұрын
@@RedRocket64 nothing wrong with that I commend you that's a lot of work
@lonestarlows Ай бұрын
Greetings. Where does one find such a fine example of a 59 that needs zero metal work or rust repair. Fantastic
@david_at713 Ай бұрын
Bro!!! I just picked up my 81 coupe from AZ im in Houston,Tx as well gotta say I’m watching all of your videos really appreciate you sharing all the knowledge
@RedRocket64 Ай бұрын
@@david_at713 Thats good, these are great cars, appreciate the support ✔️👍
@frankdavis2618 Ай бұрын
💪🏾💪🏾💪🏾🔥🔥💙💙
@mefieswaby Ай бұрын
Amazing job like a real G...
@RedRocket64 Ай бұрын
Thank you 🫡
@CarlosAbrego-we7sd Ай бұрын
Awww, man thank you so much,!! I love your work excellent appreciate it so much.! Love that 64,!
@RedRocket64 Ай бұрын
@@CarlosAbrego-we7sd Yes sir, you’re welcome 👍✔️
@neuyen001 Ай бұрын
❤ awesome!!!
@RedRocket64 Ай бұрын
😎
@robsoultrain1061 Ай бұрын
💪🏾💪🏾🔥💯
@RedRocket64 Ай бұрын
@@robsoultrain1061 👍🤝
@dannyfelix6440 Ай бұрын
Hi I had a question about your red rocket I understand you put a champion Radiator in it and I was thinking of getting one I wanted to know how it worked out for you thanks
@RedRocket64 Ай бұрын
@@dannyfelix6440 It worked great, no issues at all 👍
@CarlosAbrego-we7sd Ай бұрын
Hey bro I need to ask you a question I need some help and I know you're smart guy. So I'm beginning my rear end Ford for my 6-4 I wanted to see if you could tell me I'm going to run 14 spokes what gear ratio do I need and also trying to go with a 700R
@RedRocket64 Ай бұрын
@@CarlosAbrego-we7sd anything between 3.00-3.50 gear will work great.
@jhustle74 Ай бұрын
Was the tunnel work required to fit the transmission?
@RedRocket64 Ай бұрын
@@jhustle74 Yes, running a 6L80
@jamesbarnes7045 Ай бұрын
Awesome as usual
@RedRocket64 Ай бұрын
@@jamesbarnes7045 Thank you 🤝👍
@lowridercoloringbook Ай бұрын
Came out great!😎👍
@RedRocket64 Ай бұрын
@@lowridercoloringbook Thank you!
@michaelcastleberry6953 Ай бұрын
Love these long videos & the progress
@RedRocket64 Ай бұрын
@@michaelcastleberry6953 Thank you! Plenty more to come 🤝👍
@vencilldavid Ай бұрын
Coming along great man! Yeah, hats off to all the body men out there; bodywork definitely ain’t no joke!
@RedRocket64 Ай бұрын
@@vencilldavid Thank you! Lots off patience is key 😎 more to come 👍
@rafabravo6419 Ай бұрын
What brand are the sheers you used to cut the sheet metal?
@RedRocket64 Ай бұрын
@@rafabravo6419 Milwaukee 👍