Dave Hurst

Пікірлер

@MichaelJoookson 8 ай бұрын

Go to 308 Alvin street

@stevepope5484 Жыл бұрын

Still good video/if you need to see how to remove the tires or remove carter pins?? Do like me in 1975/unbolt anything thats in the way /then pray the soring doesnt take your head clean off!

@stevepope5484 Жыл бұрын

Perfect height.sounds great! Did u compress that with a floor jack only?

@stevepope5484 Жыл бұрын

Hey Ramon!

@mikieman Жыл бұрын

If you install them clips on the window knob and door knob all the way. Then you just press the handle on and it's done.

@harveywilson7910 2 жыл бұрын

It's actually Fort Lashley not Fort Leslie, I was born and raised in Talladega and still live here today..

@wehadkeekid 2 жыл бұрын

Harvey you need to read about the History more. I think you will find Ft. Leslie was the correct name of the trading post.

@85201Jz 2 жыл бұрын

Dave, can you show how to remove the latch housing? My glove box was stuck and l had to remove the door to get in. The latch button is bottomed out and won't pop up or let me pull it out. Thanks. Jeff

@wehadkeekid 2 жыл бұрын

Jeff, I wish I could help, My health has taken a turn for the worse (ALS). the worst part is I can no longer drive. Good luck with your project.

@GlennShaffstall 2 жыл бұрын

I'm thinking your original carb gasket is wrong. It's for an open plenum intake and yours is divided. The four hole gasket is correct as it seals on the center divider making the dual plane flow correctly. Ehtanol and vapor lock is plaguing me too.

@patrickostrom2762 2 жыл бұрын

The auto zone Burger flippers still behind the counter ,my I insult your intelligence please!

@dillonkruckman1846 2 жыл бұрын

They are all worthless. 98% of the time I have to work their computer for them

@dianalong6893 2 жыл бұрын

Do you kn of any pictures of old fort Leslie and why was it named that,

@wehadkeekid 2 жыл бұрын

No photos exist of the old fort as i know of, the one we played in was a re-production. and their might be some in the archives in montgomery, search for Vern Scott of talladega, he wrote a lot of the history in the local paper called the Dailyhome, hope this helps

@wehadkeekid 2 жыл бұрын

Leslie was the owners name of the general store, that became a fort

@IDKWTFID 2 жыл бұрын

Hey brother. What fitting did you use to hook the guage to it ?

@wehadkeekid 2 жыл бұрын

wish I can help, car is out of state currently, but I just screwed the gauge into the pressure regulator as I recall.

@joshlepley1306 Жыл бұрын

@@wehadkeekid Its a different size port and has an adapter on it. Im online looking for those fittings now. I need 3 of them in brass.

@djrosa773 2 жыл бұрын

I just wanted to ask you a question I got the same conversion kit as you for my 67 Chevelle and my spindle isn't quite fitting the upper ball joint it doesn't sit flush with the new disc brake spindle? Can you help me out there

@The-Player 2 жыл бұрын

kzbin.info/www/bejne/r6ikh2qMpJ2roLs

@808chevykev 2 жыл бұрын

Lol! Yes sir the muscle car joke is right on the money because they wear you out! I tried the drill but ended up burning mine out with a bottle torch. Thanks for sharing👍👊

@Anonymous-it5jw 3 жыл бұрын

Hope you've got good motor mounts to keep your air filter bolt from tapping a hole in your hood, when you rev it up. NAPA thanks you for this video, and I do too.

@wehadkeekid 3 жыл бұрын

It fixed it, No more vapor lock

@Mr.Frost181 3 жыл бұрын

I walked away an put that starter on bullshit 😂😂😂😂😂😂😂

@mikemanley5588 3 жыл бұрын

Dave, I laughed my ass off because everything you said is true. starters are a bitch. I have a 67 chevelle SS and the SOB is always creating new problems for me. Keep up the great videos,

@hoytdavis8667 3 жыл бұрын

Hey Dave we should have a meeting so that I can learn your information on Talladega so that I can pass on this information

@wehadkeekid 3 жыл бұрын

Drop me a line at [email protected], I get to talladega every now and then.

@seanbrooks9308 3 жыл бұрын

Dave, sure would like to know how all that insulation worked for ya' on the vapor lock situation. Because I noticed the rubber hose coming out of the filter, along with the metal tubing going to carb, which is sitting directly on top of the intake manifold, which gets very hot after you shut engine down.

@wehadkeekid 3 жыл бұрын

Thanks for the review, I changed all of that, I now run metal line (Insulated) from fuel pump to a Pressure Regulator valve then insulated metal line to the carb. and yes off the manifold, thanks

@jimthomas777 3 жыл бұрын

That's a 136 Chevelle with a big block , you will need to add a frame brace that came on the 138 Super Sport or the frame will stress crack

@jimthomas777 3 жыл бұрын

Also check wheel bearings , You do know that the ball joints are welded in and since someone changed the front to disc brakes , maybe they didn't bother welding them ? I have the same size rally rims on my 66 and mine don't rub

@wehadkeekid 3 жыл бұрын

Thanks Jim, I have gone over this one from front to rear, all systems have been replaced or touched in someway. I don't romp on it, so frame supports are not a big deal at this time, but thanks for the advice

@wesleyponder2513 3 жыл бұрын

Like the video. I live around the curve and it also runs through my girls. Been fishing there going on 55 years now. Ibe seen about everything on that bridge. Yes theres been 3 people drowned at the big rock the 55 years ive lived there . when I was little there was a store there at the bridge called Rogers stire and a gristmill on the left side of the bam just below the brick building. You were parked in pumpkinville alabama. Ust to be on.the map tell the late 40s. Between talladega creek bridge and dry creek bridge is called the pumpkinville coummiety. My grandma and grandpa's had the largest syrup mill operation in talladega county and raised acres of pumpkins here

@wehadkeekid 3 жыл бұрын

I like the old history of Talladega, thanks for the input

@AutoWorldzz 3 жыл бұрын

Nice Videos， This is really my favorite channle.:) .🌴🌴🌴excellent ☺️☺️☺️👍👌👍👌👍 🌴🌴🌴 🌴🌴🌴 🌴🌴🌴 🌴🌴🌴 from:Talladega Springs Town Talladega County

@AutoWorldzz 3 жыл бұрын

Nice Videos， This is really my favorite channle.:) .🌴🌴🌴excellent ☺️☺️☺️👍👌👍👌👍 🌴🌴🌴 🌴🌴🌴 🌴🌴🌴 🌴🌴🌴 from:Slocomb City Geneva County

@savannahbrooke6745 3 жыл бұрын

Sadly, no one ever restored this. I went and visited it today, and spoke with the man who owns the property. At this point, there's no hope in restoration whatsoever.

@darylseay6741 4 жыл бұрын

I grew up at this station! This was my dad's tire and convenience store in the late 80s and early 90s! The pump tanks were gone but he stayed busy! I was about 7 and built my own "race car" out of 5 gallon buckets, busted tires and a lawnmower steering wheel the neighbor Al Hardee gave to me! He had a wrecker service and junk yard next door. He lived in the little red house you saw just west of the station!

@Willynilly_69 2 жыл бұрын

It’s crazy we both grew up here my dad and grandpa ran a glass company out of it

@trillrifaxegrindor4411 4 жыл бұрын

good ole boy,i wish i was nearby.sweet chevelle my friend,had a 72 2 door hardtop and a 55 210.now ive got newer junk but i love my chevies

@trillrifaxegrindor4411 4 жыл бұрын

YOU NEED TO HAVE YOUR OWN SHOW.....no bullshit!!!!

@wehadkeekid 4 жыл бұрын

I wish, but thank you

@karenmann4825 4 жыл бұрын

What a great thing to do. Thank you!

@wehadkeekid 4 жыл бұрын

well thank you, Talladega has a lot of history and no one take advantage of it

@sweetdandelion2001 4 жыл бұрын

Is it true you are going to have a total black out tomorrow??

@xDragonHawk 4 жыл бұрын

Why on positive and not negative which is safest?

@wehadkeekid 4 жыл бұрын

I wanted to kill all power from the battery , I have a small draw that kills the battery in a few weeks of sitting, also for security reasons

@hillmonbrooksjr9847 4 жыл бұрын

Great video😂

@wehadkeekid 4 жыл бұрын

Thank you, glad you like it

@hillmonbrooksjr9847 4 жыл бұрын

😂😂😂

@jimgee2676 4 жыл бұрын

yur an idiot lol ...you have a cowl raised hood meaning you got lots of space under the hood to even use a 2 inch spacer ...just from that alone i can tell yur not the sharpest tool in the shed ...as for autozone their a reputable auto parts store that is well knowledged and have good parts and good prices and yes alot of stores give instore credit via gift card under certain conditions ,,heck even walmart does it ..i think the problem is you and not the parts store ...yur lack of knowledge from the hood clearance tells me so

@wehadkeekid 4 жыл бұрын

Dear Dr. Gee, just to prove how much you know, I have appox. 1/4" clearance under the hood, with the cowl, so don't tell me what I can do, keep your comments to your self, ok

@jimgee2676 4 жыл бұрын

@@wehadkeekid im glad you responded to my anoying comment I apologise for that 8 was out of line

@adamdavis2760 4 жыл бұрын

That is a sweet car Dave. The 66 is my favorite of all the Chevelles :) I will have one some day. I hope life is treating you well

@JohnnieWhos 4 жыл бұрын

This guy dangerous with a drill. Kill drill bill . Safety first he need Parental vision with his power use

@VintageMoparnut 4 жыл бұрын

I run a 1" 4 hole spacer plate under my 4 barrel .You can also run a wix metal filter with a built in vapor return port . 3/8" in and out and the vapor port nipple is a little smaller then 5/16" . You run a line with hose or just hose back to a port on the sending unit or tank. You can drill and tap and install a brass port into the part of the fill spout that bends down towards the tank. You can use a wix filter from a 1982 dodge d150 truck like the one i described up top. I use them on my 65 dart and 82 d150 truck .