If i have this dsp i won't need to use a crossovers anymore?
@hanselwhitman29732 күн бұрын
I was wondering if you could use a subwoofer box for a chuchero? Not sure if the boxes are built different of not
@alexisdelgado67709 күн бұрын
Can u help me out idid the same thing you did on the video but my radio or eq doesnt turn off with the second battery connected to the trunk
@Prince_Installs8 күн бұрын
@@alexisdelgado6770 re check your connections. If they are fine. Put a switch in line with your red “ACC” wire that should turn everything off and on when you like
@alexisdelgado67708 күн бұрын
Ok thanks ima have to do that but one more thing i have the medusa remote and the red wire connected to the back battery thats is that fine ?
@alexisdelgado67708 күн бұрын
Do i put the switch on the radio box or where i can the amps with the battery ?
@Prince_Installs8 күн бұрын
@@alexisdelgado6770 up to you. I’d put it on the radio box so it’s easier to access and you won’t forget to turn it off.
@shynetilidie11 күн бұрын
you have a separate amp for tweeters?
@Prince_Installs8 күн бұрын
@@shynetilidie yes
@DanielSanchez-os6mj17 күн бұрын
What is brand of speak on wire
@Prince_Installs14 күн бұрын
@@DanielSanchez-os6mj rdcarshow.com
@drewskisensation363924 күн бұрын
Is the drivers bridged
@Prince_Installs23 күн бұрын
@@drewskisensation3639 yes but you don’t need to. Depending on set up
@8mitch_29 күн бұрын
How would I go about using one 4x speakon cable to 2 amplifiers, I’m having trouble finding an amplifier with the right power requirements. And I figure it would be better to run 2 separate amplifiers for my two mids and two tweeters. But do I just cut more of the speakon cable and run the pos/neg of the mids to one amplifier and the pos/neg of the tweeters to the other? Or is it more complicated than that?
@8mitch_29 күн бұрын
I’m aware I’ll have to run a crossover and equalizers as well, but I’ve been trying to find the to this question for a while. Anything helps 🙏
@Prince_Installs25 күн бұрын
yes so on the speak on youll have 4 wires 1+ 1- 2+2- right... put 1+1- on one amp and 2+2- on the tweeter amp
@8mitch_25 күн бұрын
@@Prince_Installs appreciate you bro 🙏 thank you. Also your whole channel really been helping cuz most the others not in English. And the translation on KZbin is ass 🤣 much love bro
@Prince_Installs25 күн бұрын
@@8mitch_ you already know bro. My bad for the late response trynna get better with this KZbin stuff. I just uploaded 2 shorts on the speak on cable. Should help out a lil too. Appreciate your support bro! 🫡 hit me anytime
@andygomez4083Ай бұрын
What does the horn do??
@dukemaui91Ай бұрын
What’s up brother! Great explanation! Not a lot of people make videos on how to wire these chuchero setups. Can you post a link for everything used in the video?
@Prince_Installs25 күн бұрын
Alot of the Products here are from RDCARSHOW.COM
@dukemaui9117 күн бұрын
@@Prince_Installshow do you get rid of the alternator whine? I’m having issues with that.
@8mitch_Ай бұрын
Do the input RCA’s connect to the head unit, and the output RCA’s connect to the amps?
@vicaudio65Ай бұрын
How many ohms are the tweeters??
@johnquinones46712 ай бұрын
MTV cribs just explain how to set it up lol
@aleirrizarri38482 ай бұрын
how about the yellow wire ?
@CMDBoy2 ай бұрын
Thanks for your help
@swipingheads88762 ай бұрын
What’s some good settings for 2 10s in a chuchero box
@sageminentjunky51972 ай бұрын
Positive and negative you weirdo
@mcjuniorV12 ай бұрын
do a chuchero install in a car
@BiGPAPAGUNNER2 ай бұрын
Do you need a separate car battery ???
@Prince_Installs25 күн бұрын
Yes! It’s recommended
@ihatelexuslol2 ай бұрын
PRV>>>
@AyeYoStony3212 ай бұрын
Question……do you tune the amp before the crossover or other way around?
@Prince_Installs25 күн бұрын
Crossover first then amp. Then back to crossover for fine tuning. 😅 good luck
@AyeYoStony32125 күн бұрын
@@Prince_Installs that emoji got me second guessing
@Prince_Installs25 күн бұрын
@@AyeYoStony321 haha no just a little confusing to explain. I guess theres no right answer for that. you have to make sure your gains are up enough on the amp to hear your music then you need to tune your crossover. crossover setting should be set wiithin your speaker playing frequency. depending tweeter mid bass etc..from there Match the output level to the gain of the amp the best you can if you dont have the right tools. usually leave crossover output straight flat and gain up and a quarter back. alot of back and forth until its set to your liking. A little better?
@djflavordaone2 ай бұрын
how much to make that box setup
@willsrestorations3 ай бұрын
Dude you got to get the Alpine grill for the front of that speaker.
@okok83893 ай бұрын
I have 4 gauge running to my bass amp already can I still use it?
@zaghell3 ай бұрын
you would think a youtuber about audio would have at least a decent mic that doesnt sound like ass
@eighty3boxchevy3 ай бұрын
I've been lookin at their boxes for months and now I come across this.. Impressive
@Prince_Installs3 ай бұрын
They have great stuff. You will not be disappointed.
@kontrollme90343 ай бұрын
I’m really thinking about getting one for my truck so I don’t have to deal with my door speakers, I got ds18 all around but chucheros are just such more convenient 🇩🇴🇦🇷💪🏾
@aleirrizarri38483 ай бұрын
how do u keep the eqz and radio stay in place in the box ?
@aleirrizarri38483 ай бұрын
how do you keep the eqz in place in the eq box with radio ?
@idavho42663 ай бұрын
what amps are you using for your chuchero?
@Prince_Installs25 күн бұрын
Taramps 3k for voice taramps 400x4 for tweeters
@maplesgamer3783 ай бұрын
Why would you need 3 equalizers ?
@Prince_Installs3 ай бұрын
each EQ is for the different set of speakers. Tweeter on one EQ mid range and bass on separate
@ceeloc44203 ай бұрын
What size wiring you using
@xplicit72034 ай бұрын
Man this channel is amazing and straight forward, make more videos!
@anthonyvankirk69374 ай бұрын
Is that with all subs that has the 4 slots I have a skar 12 in my trunk am I suppose to cross the colors to match like you did in the video ? I’m a beginner 😅
@willsrestorations3 ай бұрын
It depends on what ohm subwoofer you purchased. If you want to run your subwoofer at near maximum power it would run at a 2 ohm connection which means you would run the jumper wires if they came with your subwoofer exactly how you seen on the type r Alpine here and then you would wire your speakers coming out of the subwoofer on the outermost post not the innermost post that he did. If you wanted to run it at 4 ohms which would be less power then you would do it exactly how he did
@user-ec8kw5ri4k4 ай бұрын
What a Pro!
@JfunnyMoney14 ай бұрын
Why dont u just resplice and heat shrink the added wires? I've used electric tape many times btw!
@TkeTheRisk4 ай бұрын
can i use the stock radio? and would i need the qualizer with the stock radio right?
@Prince_Installs4 ай бұрын
You can.. its not recommended and it takes alot more to add to stock radio but it can be done...
@aleirrizarri38484 ай бұрын
can u use first top for tweeters and drivers at same time ?
@Prince_Installs4 ай бұрын
Yes!
@aleirrizarri38484 ай бұрын
so adjust it to 400 n x20 , how about bottom 2 or 4 ch? set at 4 channel which is what am going to use ?
@michaelmarquez61332 ай бұрын
So I have 6.5 components in the door and tweeters on dash would I split those up as far as wiring goes and take off the crossover that’s on the tweeter?
@teneyuquejustin264 ай бұрын
Bro im using 3 4 ch amps 1 for highs 2 for midrange im using 3 eqs what would be the best way to configure the rca should i use both front and rear on the eqs??????
@Prince_Installs4 ай бұрын
you can run is together on one EQ if you want put on front and rear and split it to the 2 different amps or run it separately with a splitter from the EQ to the each amp.
@elitegamerx25344 ай бұрын
I been looking for cables like that where did you get those ?
@Prince_Installs4 ай бұрын
RDcarshow.com
@underwaterworldmckay55024 ай бұрын
This made me understand the clarion 100% more. Especially the x20 switch. That's for the tweeters/ drivers. Man thank you. Make more video. 🎉🎉🎉
@tripqz4 ай бұрын
thick ass chuchero W
@underwaterworldmckay55024 ай бұрын
Love this video searched for this since last year. Thanks bro good work.
@bassboyful4 ай бұрын
good set up ,next time get a good crossover 🤣🤣
@rogerbruno52165 ай бұрын
Can u do a vid how to connect to amp this same chuchero
@stevecri1235 ай бұрын
Prv sales 1 2 3 way inline crossovers at this point you would really benefit from a 30 band eq kicker used to have one but i think ds18 makes a knock off but I get it if your going for the look and simplicity
@williamtorres54025 ай бұрын
Alright so, I’m very new to this. Let’s say I get the second battery a lot of people use optima batteries. Do I run a power wire from the primary battery(engine bay) both positive and negative? I’m confused on that one part. I’m guessing because I need the secondary battery to charge as well.
@Prince_Installs5 ай бұрын
Engine bat+ fuse and wire straight to Second bat+ then Engine bat- leave alone Second Bat- Wire to Ground. Thats it! let me know if that helped!
@williamtorres54025 ай бұрын
@@Prince_Installs that makes a lot more sense now. Thanks for answering my question time to start putting my build together. Appreciate the help thanks again!
@aleirrizarri3848Ай бұрын
so when connecting power wire in front do u take off gound first then add power wire that's ruing to second battery, and how would u connect the crossover ? to amp? or straight to battery