Wtf at 13:10??? Just make the damn hole bigger and add some sort of super glue. Wanna go fancy? Don't make the bores completely round, just leave 3 Points of contact between magnet and ID of hole

Appreciate the detailed tutorial! I feel like you covered everything, and that I could duplicate your steps which is exactly how I want to feel when trying to learn something new!

Agg shame.. having to fine tune something.... As for the bed ending forward.. .you just need to change the end gcode... Not that hard.

This app seems to have a comedy algorithm, I asked for "A fisherman casting towards a trout jumping out of a river ", in all cases the fisherman was using the rod in a way that nobody that had every fished would do, sometimes with more than 2 rods, whilst doing some kind of yoga, and the fish was doing weird stuff in most cases. I gave up after about 10 tries. I might need more than 20 coins ;)

Thanks mate

Thank you sir!

Like some others it doesn't work for me with my NVIDIA GeForce RTX 4060, I used to use this hack on former version of Solidworks it worked perfectly with solidworks 2020 but not this time with 2024... Too bad, any ideas on how to make this damn thing work? 😢

Обалдеть, 7 часавой разбор солида, это мощно) ты крут

Aren’t you getting a degraded signal running that cable that far? You should add an ethernet range extender in the middle and you will reduce your latency and improve speeds.

Thank you sir, Works perfect for 3060 :)

Hola , eh comprado el Lizard y lo probé en varios PCs y en ninguno funciona y Creality no me da ninguna respuesta , mi pc es viejo , que característica necesita el Pc para que funcione ? Gracias .

Just fyi, that version of Mickey is NOT public domain.

So I really want to grab this printer, but I see it's only rated for a layer height of 0.1mm. I was really hoping for 0.05mm when I print small items that need good detail. Is there a way to make it print at 0.05mm?

Great video. Thank you for making it. I ran across your video while trying to do further troubleshooting as my extruder is still doing the same thing as before. Initially I had a hotend and an extruder clog but neither were anything terrible. Disassembly and fidling around with those tiny cables was a real mother but I got it taken care of. During reassembly I noticed I was missing the little "tensioining screw" that goes inside the spring. Without it the pieces and parts just flop around. I was able to print a replacement piece for it so I now have that installed. From what I can tell I have done exactly as you say in your video however, I'm still having the same problem where the filament gets to the gears and the gears just spin but never grab onto the filament. I notice you fully tighten the spring which I have also done. I'm curious, when it's all put back together how freely should the yellow gear spin if I try to do it by hand. I imagine slight resistance which is about where I am. How tight should the four screws in the back be? I may have them too tight which would be sandwhiching it too much. That's really the only two things I can come up with. I have an X1C with an AMS purchased in October 2024. I also put in a brand new .06mm hardened steel complete hotend kit today so there's no way my stuff is still clogged yet it's still doing the exact same thing. Any advice you might be able to offer up would be so appreciated. Sorry so wordy...think I'm gonna copy/paste this over to Reddit too. Thanks so much for your insight and expertise. I'm happy to now be a subscriber.

Do you have a video on how to setup Fusion 360 to print directly to the Bambu printer? That is cool.

Nice Jobs bro 😁 give manuale scan next pliz 😜

My 4090 used to have this option in the Makers version(I recalled for a lot of folks it did not...), sometime fairly recently mine stopped showing up as well. Your instructions worked great to get it back. Thanks!

You should mention you need ehight screws not four………

I'm hoping that the con gets improved

hi, what brand & model is the electric screw driver? thanks

Great informative videos as always! 👍🏼

Some people identified the quality problem is due to Creality Print 5.0. Please use Orca Slicer or download the new Creality Print 5.1. I personally using Ocar Slicer and it works well.

how tall are you

Perfect thank you!

thank you sir🙏🏼

Thank you for putting this tutorial set together. It's really helped me demystify SolidWorks and prepare for the exam.

Nice, its going by first try :) (NVIDIA GeForce GTX 1080 Ti/PCIe/SSE2) Greetings from Germany

Awesome, Thanks a lot! 🤗

Just subscribed so I can follow this build! As a drafter also I’m curious to see what you come up with

I can't find a premade profile for Prusa Slicer or Cura for the Ender 3V3 PLUS, how do you guys print with it ?

thank you so much for this video, im a noob to 3d printing, i bought a 2nd hand reprap x400 which was a nightmare to get working but i got it working. im going to sell it now and buy a new 3d printer lol. you said in your video that it is hard to tweak the settings to the ender to get it to print better quality prints, could i buy those settings off you? what is the bambu printer that you mention, would you recommend a bambu printer over ender for a noob like me?

I always print a small test print with the Bambu A1 Mini after changing the filament to dual-color, so that I can estimate the color gradient well before printing. I also designed something on Makerworld, if anyone can use it. The name is: Dual-Color Dial

Could you try this on SolidWorks 2024 connect? The registry is not the same.

Dude!! I just did this and it worked like a dream. I have the SolidWorks Connected version which is the "makers" version of the profesional suite. This worked so good. Thanks to people like you for putting out videos that are a great help for those of use that need this kind of information. You wnoder though, why things like this is locked up and grayed out in the fist palce??

excellent video thank you for your time and efforts, I have this question regarding the insertion of magnets in a support enabled models, I noticeds that If I do have a model that needs support, when I insert holes for the magnets, the slicer tends to fill the hole with support, is there a way to tell the bambu slicer that it's intended to have a hole there?

Great tutorial. I got it working on an N100 mini PC, lol! Put the new key in Other, where the Intel options are. I used 30408.

I can understand that you are frustrated over the pricing. I just figured out that for students and teaching personell you get pro free of charge. So yes I think 20€ a month is a lot but due to me mostly using an iPad I was really happy about the generous offer of the developer. Through your subscription you also support students and education.

It will be good only when there will be a free hobby subscription, not a trial version with very low resolution export.

Lifesaver.

why does the "hardened steel gear" look like its made from cheap plastic?

No it is not

Can it check inside volume like cb ft thinking of using this for subwoofer box building

my card is NVIDIA GeForce RTX 3060 Laptop GPU/PCIe/SSE2 these numbers did enabled the button but not the effect any ideas?

It worked, thank you!

Actually worked after 10 tutorials I have a 3070 worked on the first number.

Amazing - thank you! Really looking forward to the following videos on each feature etc

Probably super late, but I do it the same way using the slightly larger hole, and just throw a dot of superglue on the magnet before tossing it in. Works great since you dont have to force it in and potentially unlevel your bed.

So amazing sir

Thank you so much, Excellent video mate!!

Thank you, thank you thank you. This is an excellent explanation. I really needed it. I love your tone and your ambition to explain this in such a fantastic way.