Пікірлер
@KmakeR1 Ай бұрын
11?
@panagoskakatosis5314 Ай бұрын
ha ha ha no price ha ha ha
@Gimme_Stitches Ай бұрын
Where is it located?
@toms-channel Ай бұрын
Germany - NRW
@Gimme_Stitches Ай бұрын
@@toms-channel price?
@robertstrops2346 Ай бұрын
Awesome build! If not for my current bike I would buy this one in a heartbeat. Keep up the great work!
@OWENSTECHEDGE Ай бұрын
the strip in the middle of the cells is unsafe it can go through to the top of the cell and cause in internal short its better to overlap the strip on to of each other right above the cell caps
@technospcgaming 3 ай бұрын
How did you get on with the build mate. I have just gotten a xtz750
@SebastianDrogan 5 ай бұрын
Hey Tom! Schön zu sehen, dass Du dir die mühe machst die XTZ wieder flott zu machen. Ich starte nach langer Vorbereitung gerade meine Restauration und bin immer auf der Suche nach Input! In sofern vielen lieben Dank für alle Aufnahmen! Speziell diese, wo du das Zündschloss demontierst hilft mir, weil ich es entfernen will. DANKE! Warum hast Du keinen weiteren Videos mehr gepostet?
@gd.ritter 5 ай бұрын
2.9v is a common cut-off voltage for LiPo/Li-Ion as it's gentler on the chemistry. 2.5v is a deeper discharge you can do but it may affect lifespan of the cell(s) and current delivery at those low levels is usually limited.
@gymingwithtony 7 ай бұрын
HI, just started following you. I really like your content as I just also bought my xtz having sold my xt600. maybe we can be exchanging notes as well. I've done a small video on my Xtz repainting and currently compiling videos as well. my channel is mostly about fitness so you can check it out. Good job.
@blue_gale0099 8 ай бұрын
Nice !
@technospcgaming 8 ай бұрын
Yo dude have you got any more video yet i have just sat and watched all your built videos and interested to see the rest of the build
@AnupamVipul 9 ай бұрын
Hey man great work I have to say . I have taken a lot of inspiration from other 18650 3d printed holder and made my own remix of it , IT worked but was not great . CAD Modeling of a 3D Printed 18650 Holder kzbin.info/www/bejne/qJ3Xo2Wtf9mfg6c Launguage is in Hindi but u can see the CAD though porcress . YOU have given me new though procress THANK you . I will pin you once I have built it . AGAIN THANKS
@Fraochs 9 ай бұрын
Hi Tom, ich habe bei meiner Nabe, bevor ich sie erneurt habe (gepulvert) die Lager raus gemacht. Mit einem Heißluftfön 500°C die Nabe am Lager erhitzt und dann mit einem scharfkantigem hartem Rundstahl raus geschlagen. Ging ganz easy hat vielleicht 10 Min gedauert.
@bryansuperduke1290r 9 ай бұрын
you should not push bearings in on the inner race, use large socket in the outer race.
@bryansuperduke1290r 9 ай бұрын
One of my mates just got a 1989 750, so he is having to do a lot like you. In english it a lower and upper yoke for the forks
@bryansuperduke1290r 9 ай бұрын
Use left handed drill bits as you run brill backwards and when it grips the tread it will spin the thread out.
@bryansuperduke1290r 9 ай бұрын
Stop using ratchets to loosen bolts, get longer breaker bad to do it. When doing things that need front or rear off ground, undo all the tight bolts while bike is on its wheels and more stable.
@gerrygreen1 9 ай бұрын
Hi, hope you’re well. I loved the work so far and great videos. Just wondered if there would be any more? I’ve always fancied one of these and I’ve learnt loads from your stuff.
@toms-channel 9 ай бұрын
Hi Gerry, there will be more Videos, but there is a big Butt in the middle. I do this in me freetime, of which i have had not so much lately. Reasons are, i moved from my "home" Garage, to a rented Garage in February, which took some time, you know like it is. Then we moved with all our stuff in May into a new home. In the destination house there is and was a lot todo. We managed todo a lot, but then, i can only do so much in my freetime and most of the time i spent with renovating or keeping up with my bikes i already have. My buddies call me a "freak" because i am so tedious with my bikes. I like to have them clean and very well maintained, that i do not make a video about that. Having said that, if anyone wants me to put the camera on my maintenance stuff, i will do. So the SuperTen Project got very neglected for obvious reasons. I have at least another 4 or 5 videos from all the things i have done, but did not find the time to get the material edited. I am not planning to be so "silent" here but when the wife says, kitchen goes first. I do the kitchen ;-) Then we have to also count on the holidays with the family and so on. Stay tuned, there will be new videos as soon as possible! And for all of that, thank you very much for caring!
@gerrygreen1 9 ай бұрын
@@toms-channel oh wow, it’s great to hear that you’re ok. Sometimes life just gets in the way eh? I have a ZXR 750 that I’m trying to “refresh”, wouldn’t call it a restoration as it’s being done on a tight budget and when life (and wife 😂) isn’t getting in the way, so have enjoyed some of your tips. Especially the part about painting as that’s something I’m keen to do myself but haven’t got the kit yet. Good luck with the house stuff and looking forward to the next instalment when you get time. I’ve subscribed now so should get notifications when it happens 👍
@garyhoward4064 10 ай бұрын
I also have one in excellent condition. Where do you find parts for the bike? Seems like Kedo only has a few parts.
@oskarwolfmann6940 10 ай бұрын
Nicht schlecht die Dokumentation. Wo bekomme ich die Gummiwinkel für die Blinker am Ende des Videos her?
@erikderrote5263 11 ай бұрын
Warum in englischer Sprache? 🤷♂️
@BigSwede500 Жыл бұрын
My 750 tenere vibrates so my hands get numb. Anyone who has a solution for that? But it drives great without any other problems.
@toms-channel 10 ай бұрын
That is a common "issue", the more your carburetors are out of sync, the more it vibrates after 4500 RPM. It vibrates for me too but in an OK range. More on that on an upcoming Video. Greetings and thanks for your comment.
@jenseitsvonjedem1612 Жыл бұрын
Herzlichen Dank für das "Mitnehmen" auf dein Restaurationsabenteuer. Meine Tenere braucht auch dringend etwas Zuwendung und da ich kein großer Schrauber bin, hilft mir der Einblick sehr. Es wird ganz sicher keine Restauration, aber ich will wohl versuchen, technisch wieder auf den Stand zu bringen. Momentan läuft sie auch nicht gut, dass war der Anstoß, mal etwas tiefer in den Materie vorzudringen. Liebe Grüße
@stratosFZ1 Жыл бұрын
Hey there! I I'm trying to find a new front rim and spokes for my tenere but can't find anywhere...the used ones i find don't have a good rim condition ...i found a shop that sells front rim and spokes but for the tenere 700 ...rim size is the same as the tenere 750 (21x1.85).do you know if this rim could fit the old tenere 750?
@toms-channel Жыл бұрын
Hi There, D.I.D. Rims are no longer available. If they are, it is new old stock. You can get really new ones from Excel and so on. I got new Spokes from a shop here in germany. My Rims in the Video are original Rims but painted already from the guy i baught them. Sorry, that i can not give more as an answer, but ask a local dealer for let's say KTM, they may can help you locate the right dealer.
@graemefivaz1308 Жыл бұрын
I have so enjoyed watching your video. Its nice to just watch you work on this old school but great bike. My son and I rebuilt a Super Tenere '89 model during COVID and it was a wonderful project. We found that servicing and in particular balancing the carbs was difficult, but worth persevering to get them 100%. And we also had the same problem with taps leaking, we only found out the next morning until half a tank of fuel had leaked out on the garage floor! Happy rebuilding and keep the videos coming. All the best and thank you.
@Handskemager Жыл бұрын
Definitely not laughing about your paint booth, I did a similar thing when I was 17 and painted my moped! :) works better than painting in the open air but not as good as a proper paint booth. A happy medium! :)
@Handskemager Жыл бұрын
I’m thinking about getting either one of these or a Honda XRV 750 Africa Twin, can’t really decide.
@Handskemager Жыл бұрын
Sometimes when you pull something like this apart, you wonder “how the hell did they manage to put this thing together”
@rexcroatorum4281 10 ай бұрын
Those plastics always cause problems 🤣.
@blue_gale0099 Жыл бұрын
Nice！
@shaunhardie6077 Жыл бұрын
Great to watch someone who is learning about things as they go, big respect to you. One thing about your paint gun, the air cap at the front, there are 2 parts sticking out at the sides, they should be horizontal, that way you will get a good spray pattern. Keep up the good work and the videos coming. 😎👍.
@guillermooryan5301 Жыл бұрын
Faltó lo más importante, ver como enciende y como funciona.
@rossco88 Жыл бұрын
Think you fussy, it's a old bike. My 2022 tenere is in worse condition than that 😂
@lucaottaviorovesti7436 Жыл бұрын
Hai mai avuto problemi di carburazione grazie
@elvinderiedmatten1010 Жыл бұрын
Der Tank sieht ziemlich gut von Innen aus. Wirst du den Tank trotzdem vielleicht entrosten und neu versiegeln?
@steenlassen5718 Жыл бұрын
Those screws are not Phillips screws. They are JIS, and if you use a Phillips screwdriver on them, the likelyhood of ruining them is pretty big. Get or use a JIS screwdriver. They are at glance look alike, but they are not. Learned it the hard way, so trust me.
@rihohiiepuu131 Жыл бұрын
I finished my rebuild of my XTZ 750 two weeks ago and I bought new spokes for rear wheel before actually checking the hub and rim. They where too far gone to use anymore, bearings where loose on the hub and rim was corroded badly. So now my XTZ has a TDM 850 3VD real wheel, that fits exactly. Maybe if someday I find a XTZ rear hub that is in good condition, I might put it back. Replacement rims and spokes are easy to get, hubs no one makes :(
@toms-channel Жыл бұрын
Nice,That you finished it! I have still a long way to go. The rear is as bad as the front. So i got to adress that in the next Episodes. Have fun with your Bike
@beam664 Жыл бұрын
which webshop are you going to use to order the fairings? Do you also know a good website where I can find the color codes of original colors used by yamaha?
@toms-channel Жыл бұрын
Hi Mike, the fairings are not produced anymore. Everything which you can buy new is a recreation and not from yamaha. There is an Excel Sheet which you can search for and find the correct color codes. Better search for "rh lacke" which is a Germany based company which produces the paint. They have a Webshop where you can put your bike in and find the colors. I hope that helps. Greetings
@rihohiiepuu131 Жыл бұрын
I have the same issue on my tank :) one of the reserve filters is inside my tank. I havent bothered to take it out as its a hard job. I have extra fuel filters on my fuel lines before the fuel pump, so its not super critical currently. Might take it out next winter :)
@o.ozanbilen7113 Жыл бұрын
👍 wonderful camera angle and close shot
@cosmozh Жыл бұрын
Hast Du den Filter in Benzintank gesucht??
@toms-channel Жыл бұрын
Wenn es im Benzintank rappelt, muss da was drin sein ;-)
@cosmozh Жыл бұрын
Ich bin ehrlich, was anderes von einem Motorrad der so lange stand und sechs Vorbesitzer hatte wäre unrealistisch. Einiges kommt auf dich zu, melde dich bei dem deutschen Ténéré Forum an, dort wird dir geholfen. LG
@robertstrops2346 Жыл бұрын
Love the XTZ750. Very useful videos for people who decide to buy them now. Keep up the good work!
@panagoskakatosis5314 Жыл бұрын
good keep make all new till end of winrer time...
@susannejaeckel Жыл бұрын
Ich möchte ja fast sagen "Vielen Dank"! 🙂 Ich habe auch 2 XTZ 750, eine leider inzwischen "in Teilen", die ich mir mit 35-45.000 Km in den 90ern gekauft habe und eine mit rund 80.000 von vor ein paar Jahren, die nun wieder fit- und Tüv-fertig gemacht werden muss... Früher habe ich noch mit meinem Vater geschraubt, das ist inzwischen leider nicht mehr möglich. Insofern ist Dein Video eine gute Motivation!
@Bigbacon Жыл бұрын
These thi gs never light on the first burn. Usually have to do it like 3 or 4 tines till tbe whole thing is hot enough.
@Galax23 Жыл бұрын
It always burn on the first start but you have to know how to do it, this guy on that clip know nothing about this stove so this is the efect...
@BarnsleyBob Жыл бұрын
So happy to find this channel, I'm currently doing a restoration of my 3LD Tenere with many parts in a similar condition. For now I just want mine safe to ride on the road this year & so far I've refurbished brake calipers & master cylinders but next is: New rims from SMPro, new brake discs & wheel bearings new chain & sprockets new fork internals carbs cleaned & fuel taps repaired a full service with valve clearances checked. Next winter will be a big strip down to re-coat the frame & engine casings plus maybe a new wiring loom and then re-spray the bike in Sonauto colours. Anyway, thanks for filming your restoration, it's a great project. Also big thanks for doing it in English- I'm afraid my German is limited to ordering a beer!
@kletterkurt6268 Жыл бұрын
So you'll beware of dying of thirst... 🍺👍😅
@panagoskakatosis5314 Жыл бұрын
were can buy new???need to be the same nuber 1,85,21 ??
@panagoskakatosis5314 Жыл бұрын
rim looks ok not damage///brake pads can chek if is more damage from one side??
@toms-channel Жыл бұрын
Hi Panagos, trust me, the Rim is broken, there is not much metall left where it rusted away. Also there is a crack directly next to it. When you go offroad with that, you risk breaking it completely. Imagine hitting a sharp stone directly on that Part.
@BILJICAGOR Жыл бұрын
NIkada ne skidati kocione celjusti prije nego sto se popuste svi srafofi, jednostavnije i lakse je dok su fiksirana da se srafovi popuste. Jos jedan savjet, prilikom ozracivanja kocnica posle servisa klipovi moraju biti uvuceni u pocetni polozaj inace se nece adekvatno ozraciti. Pozdrav
@ThePlatonius Жыл бұрын
I bought a XTZ750 a few months ago that I'm trying to restore for cheap as well. It was cheap because it was used like an enduro bike, so a lot of damaged fairings and parts. I just ordered spokes from a Swedish company for the rear as I had 3 bent spokes and others looked rusted. So far I have done on mine: All fuel lines replaced. Both fuel petcocks restored. Fuel tank hole repaired. Side fairings fixed and now preping for paint. New fairings would have cost as much or more than the price I got the bike for. Whole new tail mudguard, with lights as previous one was cut and would not pass inspection probably. New clutch cable. Changed clutch lever with Yamaha TDM 900 one, as old one broke when I crashed in the woods :) Had it spare. Checked carbs, working fine, might need to tune a bit but need to ride it more to feel it. etc. Lots of things still to do before spring.
@toms-channel Жыл бұрын
Hi, thank you for sharing your project. As you see, with mine there is lots todo and everytime i take something apart, the more damage i see. Mostly from neglect and age. But well, hopefully when i am finished, it will be a hell of a bike :-)
@SamOnABikeSweden 4 ай бұрын
What's the mpg / l/km on these bikes? How much gas does they take?
@ThePlatonius 4 ай бұрын
@@SamOnABikeSweden 26L is standard tank, 5L reserve (so 21L + 5L reserve) How much KM/L you get is dependant if you know how to set carbs up, like all carbed bike. After doing carbs + valves and sync, i was getting close to 5L/100km almost. That was highway. but mostly how I ride, i get about 6L/100km as I ride offroad 50/50. so between 5-6 is good for me. Doing rallies, I usually hit reserve around 300km, but depends on the track. Then i know I can probably do around 40-50km more on reserve
@SamOnABikeSweden 4 ай бұрын
@@ThePlatonius 5-6l/100km sounds ok to me...