Getting AZ experience then bringing it back to Port Elgin to start a business for the rest of my days..

I had this Problem on one of my iPhone 4 I fixed it by heating it with the hairdryer for 1 hour than it said ⚠️ temperature warning ⚠️ iPhone needs to cool down before you can use it than I let it cool down and the wifi started working again

Would it be possible for me to get permission to use a clip from your video to use in another video? Specifically the part with the boats lit up in the water? Thanks!

If one day your water stops flowing to your sink and you go press that open Button on the control panel and nothing happens and then you press the close button and the water starts to flow again, then you need to replace that valve, the one with the little motor on it that's the only way you'll fix. I don't know why that motor goes bad and I don't think the company that makes it knows why it goes bad but the only way to fix the issue is change out the whole valve.

I always come back to this video every year 🙏

I'm running your project off a RPI Zero 2 W - it's obviously not the highest spec thing around. It seems to work for the most part, but it's not ideal. If you were to build it from scratch now, what RPI would you pick, and which camera? I notice you said you don't need a physical rpi camera, you could use a RTSP camera. Is it easy to change the config for RTSP? Plus having this little camera on a 6 inch cable that's incredibly easy to knock isn't ideal, a network camera would be much better. I haven't looked at the script itself, just the config for the basics, is there anything in it that is pi specific and would prevent you running it on any other system with python and the dependencies installed?

Is there a way when calibrating I can see the area it's going to use in real time? Then I can hit enter? I'm slightly elevated but the level at which it took the calibration pic was way above the road height.

I noticed during the dependencies, I just caught libjasper-dev was one that failed (doesn't exist), and as it went further down the list I think I saw a few more - will have to review the log file. Just before I go in a rabbithole - will this work with the rpios bookworm release?

Commented a few times now, one with how I hope your software can help me and the surrounding area to protect human and pet life due to cars doing crazy speeds in 20 and 30mph zones. If it does so, I will be sure to pass this on to you as I can imagine the feeling of being told your software is now helping to protect not just pet life, but human life as well. I've written the full story and context in another comment, but for the sake of brevity on this one, Is there something similar to your script, or something you can recommend that could take an existing video and get the car speed? I know the length of the car to the millimeter, I sprayed red lines on the road so I could overlay the videos in an attempt to roughly calculate it's speed. The issue is I don't want my bias to make it sound like he was travelling faster than he was, so I wasn't keen on making an accusation when it might not be entirely accurate.

Also, I'm not one for commenting, but wanted to commend you for taking the time and effort to produce something for free for people to use. It's a long story, but as a developer myself (much more amateur than you) I'd love to hear if anything I created went to good use. I'd appreciate it if you could read the below, but understand if you don't wish to, or simply lack the time. Recently we moved somewhere new, very rural and all non classified roads in the UK are 60 MPH limits. Many of the cats in the new development use the Cornish stone hedges to hunt in, but they're made from stone and sometimes 10-15 feet tall and the road in some places is just 2.5 metres wide - that's before we have our annual "don't cut the bushes because of wildlife reproducing" We went on holiday and on the second day had a call from our neighbour saying our youngest cat out of 3 (really, he was my little buddy and best friend in life) had been hit and killed. It was caught on CCTV by someone doing a ridiculous speed, just 100m before the road drops to a 30mph road. The cat obviously ran to escape back toward the house and the guy over the course of 100m had drifted from one side of the road to the other. He almost ran himself off the road, and it's only by pure chance there was a gate entrance where his front wheel left the tarmac as the builders are finishing the last houses, without this he'd have hit the wall and likely flipped his car. Upon checking the video you can see he's playing with a device/phone on the dashboard. He did not make any attempt to slow down, dodge, change direction or even respond to the cat, despite having visibility of it for about 70 metres. There's a still I have where he's reaching for the device and you can see the cat behind in the car in the same frame after he's hit it. He was TOTALLY unaware he had killed the cat that's how distracted he was. Pets are dying on the weekly there and a young girl was hit last year. I intend to use your software or something very similar to highlight the problems we have with speed on that road, it's a 60mph up until 2 metres from our junction to exit the estate which is then a 30, then down to a 20. It's the same road people use for running, cycling, rambling, dog walking, etc. I'm convinced in this video he could've easily killed a human given his front wheel leaving the carriageway. If that had been two hours earlier and a further 100m up the road, he could've wiped out anything up to 15 school kids. As such it's become my personal mission to find him, he also wasn't wearing a seatbelt, BUT there's enough incriminating evidence in the video for him to end up getting a driving ban, even if he had a totally clean license before. I only have a partial plate and I just need any one single character from any part of the last 3 to be able to limit it to less than 20 cars in the UK as I have all of the possible registrations in the UK for those type of cars with the starting letters. If you're not familiar with UK plates, they start with two letters - where the car was registered, the year the car was registered a space and then 3 random letters, no numbers. I'm hoping I can set this up somewhere and capture the data of people speeding, it's way more covert than me standing there with a radar gun, getting spotted and slowing down. I don't suppose you have any suggestions for a script/code that could calculate the speed of an already recorded video. I know the length of the car to the millimetres and I can always go back and take a measurement should one be required. It's not my CCTV that caught it, but I did go and spray lines on the floor and get the CCTV from the company again so I could overlay it in an attempt to identify his speed as there would be clear markings on the floor. The video is fairly high res, but it all happens so fast the end of the numberplate is blurred meaning there are 17,576 combos, just knowing one takes it down to 676, and I can filter out all of the incorrect colours to just leave black/blue which brings the results down to literally less than 15 in every possibility I've looked at so far. Without it the police will only be able to mark it as a report of bad driving and I'll be given a reference number. I feel like I owe it to my cat, the other cats that have died, and will continue to die, and due to the danger of risk to human life that I do my best to find the plate in full. I'm hoping your software could well provide the data I desperately need to prove to the local council that we have issues with excessive speeding and hope to secure some funding. If this happens as a result of your work I'll let you know :-).

I have some parts arriving today. I haven't really messed around since RPIs since around 2013 or so? It was actually for a very short period of time my router. When I had fibre installed they have the modem on the wall, so the RPI would just make the PPPOE auth happen and then the RPI was running some arm version of something like pfsense, can't be 100% sure but it was a fun project. ISP modem/router in a bridge mode, connected to the RPI which managed the authentication and routing and DHCP, which then wirelessly connected to an access point/switch that fed the rest of the network. For the 30mbit I had at the time it was perfect, but when 80 became available my little RPI couldn't keep up. Replaced it with an odroid c1 for the extra power. The uses for mini board computers are truly endless. Did I need to do this? Nope. Just one of those people that always learnt by taking stuff apart, including the expensive home PC in the 90s with no idea of how it went back together. Back in the good old days when you could connect the IDE cables backwards and create a little bit of heat and magic smoke on the ribbon.

wonder if they nebour accros the street know what kind of destruction there garbage can goes through.

Claude, thanks for posting this. Mom and dad just celebrated their 61st 2 days ago. They and dog Gus are still doing well. Gary

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

1:27 merry christmas *repeats that start messing up*

Interesting video. I wonder if this would work with the Pi 5. It is a bit more expensive than the Pi 4, but at 2.5x the spd, it might be worth it to go that route?

I have reviewed MANY of your videos and links and there simply is NO REASONABLE WAY to acquire all of the components and successfully build this Speed Camera. Is there an end-to-end tutorial?

I don't like cold weather. I would have been tired of it after the 2nd day. Thank God, I live in Florida, nice ans warm here!

Hi Claude. Well done on writing this code, I've just got it running today on my street with a Pi4B-8Gb and a PiHq camera. The only problem I'm getting is that the webserver is only displaying the slow moving vehicles and pedestrians (under 20mph). The image streaming to the GUI is also very jumpy, with the car skipping across the screen. Which settings do I need to start playing with in configuration to capture the faster moving vehicles? I have the red box and view of street very similar to how you show in your video above. Thanks again for OpenSourcing this. Jim

Nnjhjv😳🥶hhgshvhgj hý

That pour trash bin 😢

Did this John Reynolds teach Physical Education at what was then back in 1979 called Port Elgin-Saugeen Public School ? A man forever remembered by me as a “Mr. Reynolds” along with a Mr. Corbett (Grade 8)… was my favourite teacher … nice video … take care … I loved living in Port Elgin while our family was there from 1969 until 1980 …

Shize joe sell is du clocks Aden 😬🤩🤣🤣

Thank you! Next thing she badly needs is a nail trim!

you are amazing! Can this work on a non raspberry pi such as a dedicated linux install? I would like to have a standard out door camera that I would like to have setup for this information

It's a great project. But is there possible to use available video from file instead from camera. Thank you so much

Do you happen to know how to contact Cecilia Kaelin because she was my teacher and I'd love to tell her how she impacted my life!

The amish 500

The summer there must last for 7 days if you get that much snow

Damm your dog is calm there no way my chihuahua let me do that it always a hassle

What community is this??

It still showed me what I needed to know

Mild December

What a good girl! My 15 year old male Chihuahua will not tolerate me anywhere near his mouth and I just don't know what to do. I don't want to have him anesthetized for cleaning.😞

When is it please

That trash can just roams into the neighbor’s yard like a cat

are you considering doing a day by day timelapse throughout the winter of this year and next year from november 2022 to June 2023

"PANAMA RELOCATION TOUR'S!! WITH JACKIE!👍👍"

Worse instruction video ever, I learned nothing

What we don't see is the tons of lake-effect snow this area gets during the colder days.

Hi Claude. This speed camera is great fun, thank you. I have 2 questions on adjustment. 1. Can a window be set for activity? As it's dark in the evenings now, the camera captures just headlights otherwise a black screen. If I could specify at what times it starts and stops, it would be great. Second question. Can the camera work okay sort of at 45 degrees to the traffic rather than side on at 90 degrees. I'd like to capture the number plates of the main offenders if possible but wondered if the speed calibration would work okay? Thanks for a great and enjoyable project. Best regards from the UK.

👍🏼

so who cleans their poop from the streets?

How much snow fell for you guys that year?

Is amishmafia here

December 2014. January2015

kzbin.infoZH2O7Nz0_KA?feature=share

I'm having a hard time understanding why I'm getting OUT and lost tracking errors for higher speed vehicles. I'm using the RTSP protocol. I've attempted to switch between 720 and 1080 but keep getting similar issues. I think i'm at a point in the configuration where I have good numbers <20mph with minimal OUTs, but I keep losing tracking on higher values. Do you have any suggestions/tips to try?

How am I able to adjust the red rectangle to float over my street vs the trees above the street?

Hi Claude: Awesome program! /html /images /recent are no longer updating. I restarted the webserver, rebooted my RP4 to no avail. Do you have any suggestions you could offer me? Just prior to this issue I could not view the webserver. I changed webserver3.py to webserver.py. This remedied the webserver issue, however, I'm wondering if it messed up the flow of data coming from the USB camera.