We just got the exhaust done on my 05 brute 650 and omg it's sooo loud a bit too loud will get the cops called well tomorrow I'll make it a good bit quieter and it pops on the revs crazy
@coalregionrider65254 ай бұрын
You gotta wear ear plugs. Its a little better with the quiet core inserts with the turn down tips. I have a 17 and ive been wearing ear plugs for years while I ride
@ragingdragonfn4 ай бұрын
@@coalregionrider6525 I'm gonna make it sound better
@Ridin_Dirty5899 ай бұрын
Noice. Brute gang baby !
@Ridin_Dirty5899 ай бұрын
Sexy af !!
@manvstaco11 ай бұрын
I have a new starter installed, and a good new battery and it still turns over slow and wont start, would this cause a slow crank??
@adventureswithajpepa2922 Жыл бұрын
That stud bolt can break. When it does it can crack the block. I know that's what happened to mine. I filled the hole with jb weld and red thread locker on the stud bolt. It's been a few months. Still holding.
@hambonemcghee7508 Жыл бұрын
Did yours make a horrible grinding noise when starting? Mine won’t start makes a horrible noise when turning over sometimes it’ll start but as soon as you give it gas it dies
@hvacverse91872 ай бұрын
What ended up being your issue mine is doing the same thing
@matthewcalvert35382 жыл бұрын
Mine had a few rough starts and now the starter just spins over, hoping this is my issue.
@tristanbarfield57482 жыл бұрын
Sounds like my stock exhaust on my renegade
@Yamadeere3 жыл бұрын
any special tools needed to get stator off? Just burnt up my starter after the starter solenoid stuck on which caused starter to spin & burn up till i could get battery cable disconnected. Now im finding all these other issues with the machine so while its down might as well fix it right.
@lucianrollins10593 жыл бұрын
What tune u running
@kevinc15233 жыл бұрын
Yes sir
@dillonkaitypeters51323 жыл бұрын
Wanna get this for my brute but am worried about the decibels where i ride cant be over 100db any idea what decibels these are?
@franciscofelix25183 жыл бұрын
Is hard to remove the cover
@aydengarneri31243 жыл бұрын
No not at all it is just a couple of bolts and then it will pop off but be careful because the flywheel is full of magnets so it is gunna be really stuck on so you might have to pry it off a little to break the seal. Then just pull it straight off. Hope this helps 🤙
@franciscofelix25183 жыл бұрын
Is hard to remove the cover
@chrismcginn2 Жыл бұрын
no just pull off evenly you gotta fight the magnets. little 90 degree pry bar on the top to start it then you should be able to slide off if not just gotta separate a little more gasket then pull off
@MrBlackbeauty743 жыл бұрын
Jason did you have to add a spacer to your exhaust to clear the shock with the 2 inch bracket lift?
@victorkerik53514 жыл бұрын
Just pulled mine apart today and thats exactly what it was, took an hour to pick apart and clean up and lock tight that left thread bolt, starts excellent now
@jacobsgynes52256 жыл бұрын
Power commander pc5 tuned by vforcejohn
@dc5mk36 жыл бұрын
Jacobs Gynes Did you notice or feel a good amount of gains?