Ай бұрын
3 ай бұрын
3 ай бұрын
4 ай бұрын
4 ай бұрын
Пікірлер
@diegob9443 3 күн бұрын
hi, congratulations on the track and the models, but what material did you use to make the track?
@SeanLewisMedia 3 күн бұрын
@@diegob9443 Super-G uses Japanese P-Tile for their flooring. It’s imported from Japan 🇯🇵
@NtinosPetrou-m8k 3 күн бұрын
What chassis is this?
@SeanLewisMedia 3 күн бұрын
@@NtinosPetrou-m8k Rhino Racing Shark👌🏼
@JamesKolb-l8b 4 күн бұрын
Hi so not a terrible explanation but higher mah means more longevity it’s the measurement of how much useful energy you will get out of that cell per charge. how much punch it has is going to depend on what’s pulling power out of it primarily, then whether or not the battery sustains that draw or survives it even it is going to depend on what amperage that battery is rated to discharge in general very high drain batteries that can safely discharge 30 40 50 60 A of continuous draw from a single cell are not going to be the same cells that have the highest mah rating in a given size generally they are constantly fighting to create battery chemistries that allow higher capacities and therefore mah ratings while retaining the ability to safely discharge massive amounts of power quickly. Edit- check out an ohms law calculator punch in any 2 numbers(voltage,wattage,amperage, or impedance) and it will give you the other 2 numbers use that to make sure you’re not drawing more than your battery can safely discharge and badabing
@JamesKolb-l8b 4 күн бұрын
Wow thanks
@AORocket7 4 күн бұрын
Robbie is a cool dude when he ran fit he would hook me up back in the day
@SeanLewisMedia 4 күн бұрын
@@AORocket7 that’s dope man!
@kresterdog7303 5 күн бұрын
Awesome work and that is gonna be one badass crawler. Coop Eel is what Ive been thinking about for a long while. I need to bite the bullet like you did. Keep up the great work
@SeanLewisMedia 5 күн бұрын
@@kresterdog7303 thank you so much! So far this build has been going super smoothly🤘🏼
@shredcraftrc 5 күн бұрын
Nice work! That rig is gonna gobble up the hard lines!
@donavinmoller2432 5 күн бұрын
Agreed I think it's going to be great rig to tag along with
@JustSlideFactory 5 күн бұрын
Man I follow your page as well I love your RC drift content. Both you guys have inspired me to get started myself !
@SeanLewisMedia 5 күн бұрын
@@shredcraftrc Thanks man!
@shredcraftrc 5 күн бұрын
@ thanks man, I appreciate it! 🤙
@MrYAR102 7 күн бұрын
What kind of floor carpet (?) did you use? Какой тип покрытия у вас на полу? Ссылку?
@SeanLewisMedia 7 күн бұрын
This is Japanese Imported P-Tile. It’s the new standard across most USA drift tracks. It’s been adopted from the big tracks in Japan🤘🏼
@MrYAR102 7 күн бұрын
@@SeanLewisMedia Thanks! Start to build own track in my city
@SeanLewisMedia 7 күн бұрын
@ that’s awesome!
@laysarlizard5058 10 күн бұрын
Hey man, very chill cool video. Love the build process!! Just wondering where you got the cutting mat from? Can‘t seem to find it in the description. Thanks :D
@SeanLewisMedia 7 күн бұрын
That one I picked up from Michael’s Craft Store! Here’s an Amazon link amzn.to/4gs2KQZ
@laysarlizard5058 10 сағат бұрын
@@SeanLewisMediathank you so much, greetings!
@TomWest-ir5vq 11 күн бұрын
Hi whats the full width off the body shell front and rear
@SeanLewisMedia 2 күн бұрын
Hi! I’m not exactly sure. It’s the bmw e30 wagon on super gs website and they might have the specs
@TomWest-ir5vq 2 күн бұрын
@@SeanLewisMedia 200mm
@TomWest-ir5vq 11 күн бұрын
Hi whats the full width off the body shell front and rear
@rjbaima 11 күн бұрын
COSTA MESA...THE BULL RING....🤩
@SeanLewisMedia 11 күн бұрын
@@rjbaima Yes🔥🔥🔥
@denzel-fb 12 күн бұрын
Nice
@SeanLewisMedia 12 күн бұрын
@@denzel-fb Thank you!
@JustSlideFactory 12 күн бұрын
Man thanks for this video my guy! I started RC Drifting last year then I got into the mini 2wd buggy’s and now I’m looking into a crawler build myself
@SeanLewisMedia 12 күн бұрын
@@JustSlideFactory Glad it helped man! Yeah the crawlers are a great time!
@R2DTUBE1 14 күн бұрын
Would love to know your alignment settings. I just got an rd1.0 and it's hard to find any good settings as a jumping off point. Also looks like your front wheels are offset further out?
@justnoobcz4553 15 күн бұрын
is possible to use sanwa m17 ??
@SeanLewisMedia 15 күн бұрын
Yes absolutely, you would just need to make sure you get the right micro receiver to link to you radio. Super Gs website has a bunch of options for different radio brands.
@justnoobcz4553 15 күн бұрын
@@SeanLewisMedia thanks i see your video for this chassie and saying like man i love it :D
@mikecrosby7382 15 күн бұрын
did you add oil to the shocks? if you did what weight did you use?
@SeanLewisMedia 15 күн бұрын
I have not yet. If I do it will likely be a lighter oil between 15-30wt to find a good balance👍🏼
@mikecrosby7382 14 күн бұрын
@ I just picked these up the other day and I’m trying to figure out what weight to test out first so I was curious what you tried so far
@donavinmoller2432 15 күн бұрын
Cant wait to see what he does to make the truck his own tbh like body wheels ect
@SeanLewisMedia 15 күн бұрын
Same! It’s coming together slowly but it’s been a really cool build process so far!
@RadRaf 16 күн бұрын
Let's goooOOOOO!!!
@SeanLewisMedia 15 күн бұрын
🤘🏼🤘🏼🤘🏼
@oldmanmtb1443 16 күн бұрын
What state is this?
@SeanLewisMedia 16 күн бұрын
This is in Apple Valley California. I have a whole series from the event on my channel👍🏼 It’s a super sick place
@oldmanmtb1443 16 күн бұрын
@SeanLewisMedia it look sick! Wish I wasn't so far away.
@anuar.m.y 18 күн бұрын
the car looks so gripped up with some drag break and no turbo slope out tho to drag the wheel spin i slike when you go to neutral, the car just stops completely and you need to keep triggering the car remote.. but then again i don't know much about this little cars, i have one buty don't know how to run it LOL
@SeanLewisMedia 17 күн бұрын
Ya I havent gotten around to tuning this thing yet so it needs a little help!
@dennpeetv8389 19 күн бұрын
Hi, it looks nice. Will it work on SD2.0 or SD3.0? Thanks in advance
@SeanLewisMedia 19 күн бұрын
I’m not 100% sure. I built these with an RD1.0 and a YD2Z. Originally these were meant to be a upgrade but last year rhino began producing a full built version of this. I’m not sure if any of the layout has deviated since they began making their own full kits. You may want to email super g and ask them. They should know what fits best! Hope that helps!
@dennpeetv8389 19 күн бұрын
@ yes, thanks a lot Sir
@raymondramos843 19 күн бұрын
I can drift just like this in a 20 year old HPI RS4😮..... but no hate on the jewelry displayed here
@SeanLewisMedia 19 күн бұрын
@@raymondramos843 Dude the old school stuff still holds its own! This is definitely jewerly💎
@raymondramos843 19 күн бұрын
@@SeanLewisMediathis is most definitely jewelry and I am prime example of just jealous😂
@RadRaf 20 күн бұрын
Welcome to arthritus! These little mini's are fun. I like how easy they are to just grab and go as well. Quick indoor or backyard crawls are easy. As far as electronics, 24yep did a great piece on this very thing. Definately worth a view. kzbin.info/www/bejne/hnfHpJhoj5prhNksi=mQXvN5oPijDEqEnA
@SeanLewisMedia 19 күн бұрын
Haha thank you brotha! I’m excited to get this thing crawling. I just picked up a reefs 99 micro to put in it and just saw futitek is dropping a micro python combo that won’t break the bank. I may try getting one of those🤘🏼
@house530 20 күн бұрын
Good video, i just built mine that came with my SD 3.0 and it came with the blue o rings. I was able to get to of the shocks to rebound the way you should on the video and two had a much faster and longer rebound. I tried multiple times to fix them by opening and allowing air and still not fix. What should I do. Thanks
@SeanLewisMedia 20 күн бұрын
@@house530 yeah that happens sometimes. I usually just repeat the bleed process but some times you need to set them out for 10-15 minutes open to let the bubbles out. Sometimes they are just stubborn and it can take some time to break in
@house530 19 күн бұрын
@ awesome I’ll reopen them and have them sit for the day and hopefully that does the trick. Thanks for the advice
@SeanLewisMedia 19 күн бұрын
@@house530 Usually a good half hour to hour is good!
@Coop_RC 20 күн бұрын
Heck yeah dude, off to a great start! I can say the Vt3k Yota and Bug bodies both fit the chassis very well if you wanted to go with a hardbody 👍
@SeanLewisMedia 20 күн бұрын
Thank you man! Excited to get it out on the rocks! Thanks for the advice!
@donavinmoller2432 20 күн бұрын
For electronics I've seen hobby wing a couple times and furitech every where there is also the mofo smp pancake motors servos thankfully is simple reefs or nsdrc both have good servos nsd is a little quieter but reefs is still fine. Tire tip is inserts upfront foams rear and depending on your setup try to pick a tire above 54mm because that's stock anything lower starts to catch the diff alot anything lower than 70mm is general ball park of decent performance the specific tire sadly does depend on slight preference and alot of the terrain onto lexan bodies icebergrc has been a popular pick besides proline and jconcepts and for hard bodies Just about anything 1/25th scale model kit will fit but wt micro and some other niece companies have hard bodies other than that it's all preference
@SeanLewisMedia 20 күн бұрын
That is some great info! Thanks for sharing! I really appreciate it! That wheel and tire info helps a lot too because its pretty confusing with all the sizes. Im really excited to get this thing on the rocks. Its already coming along really well.
@donavinmoller2432 20 күн бұрын
Let's goo scx24 comp setup❤
@SeanLewisMedia 20 күн бұрын
Yes it’s going to be awesome!
@hakumiino727 20 күн бұрын
Currently building my rmx ex s pro! Can’t wait to learn drifting
@SeanLewisMedia 20 күн бұрын
You’ll definitely have a lot of fun! It’s a great car!
@hakumiino727 20 күн бұрын
@ haha yes! Yesterday I finished assembling it with some really good parts. Now all left to do is find a good s13 body and practice
@forbiddenwrld791 17 күн бұрын
I’m currently building my rmx 2.5 and i have the XD10 & 10.5 D10, but I’m looking for a good transmitter
@SeanLewisMedia 17 күн бұрын
@ Im a fan of the Futaba 4pm, but you can really choose any system.
@smithandshortdogs 22 күн бұрын
To
@PresidentoftheManosquare 23 күн бұрын
I want one but it's gonna cost more than my first actual 1/10 drift car... May have to do it though
@SeanLewisMedia 23 күн бұрын
@@PresidentoftheManosquare if you have a local track then it’s a lot of fun!
@OneTwenty8Channel 23 күн бұрын
This is a great video
@SeanLewisMedia 23 күн бұрын
@@OneTwenty8Channel Thank you so much!
@sadthebad 23 күн бұрын
Can you link the transponder setup you use on your Mini Z? I'm currently having issues with my own as I have the transponder wires directly hooked on where the batteries are placed.
@SeanLewisMedia 23 күн бұрын
@@sadthebad I’ve got mine setup that same way to the battery terminals. I’m not even sure which transponder this is but I got it from Super G’s website for their track system. I would suggest finding it there👍🏼
@EMDRONES 23 күн бұрын
Box stock is getting crazy with mr03 brushed and mr04 brushless in same heats lol 😂
@SeanLewisMedia 23 күн бұрын
@@EMDRONES haha our races keep the classes separate which is nice! Those things are fast!
@dshevack1 23 күн бұрын
Very cool thank you
@SeanLewisMedia 23 күн бұрын
@@dshevack1 of course! Thank you for watching!
@jeanfink2614 23 күн бұрын
Great explanation of the concept of these. Nice.
@SeanLewisMedia 23 күн бұрын
@@jeanfink2614 thank you!
@DarkDrift_rc 23 күн бұрын
thats it going to have to get one , you don't have to twist my arm
@SeanLewisMedia 23 күн бұрын
@@DarkDrift_rc Haha! you’ll definitely have fun!
@Pixel_Heart 23 күн бұрын
This video is so good! Great job breaking everything down🔥🔥🔥🔥🔥🔥🔥
@SeanLewisMedia 23 күн бұрын
I'm glad you liked it! Hopefully it’s helpful:)
@JKdrifts 23 күн бұрын
Our location is getting into mini z now
@SeanLewisMedia 23 күн бұрын
Thants awesome! It’s a ton of fun to get into the race mind set now and again🏁
@tylergreene7655 25 күн бұрын
SupDef 🤘🏻
@SeanLewisMedia 25 күн бұрын
@@tylergreene7655 Oh yeah🔥
@antoniomargallo5317 25 күн бұрын
Doesn't even gets a cheap lexan body for 6.000$ ...
@SeanLewisMedia 25 күн бұрын
@@antoniomargallo5317 idk about cheap lexan bodies. Custom bodies can cost up to $500 for the really good ones
@antoniomargallo5317 14 күн бұрын
@SeanLewisMedia I don't know, just throw something on top of it, they look so weird with the frame, servos and esc all showing. I know, it's too troublesome to take it out to make a tune, then put it on, just to realize the tune didn't works and you have to take it out again. Magnets, that's what I did for my RC crawler.
@stewiethegreatRC 25 күн бұрын
Sean! Happy New Year Brother! Super awesome content per usual! As always, it inspires me to keep dropping content! Are you still running the shark? I swapped my rear shock tower out for the lightweight narrow version, full belt drive and now waiting on the RS-ST PRO to arrive. So far, the changes have been amazing and very noticeable on performance! Video coming soon brother!
@SeanLewisMedia 24 күн бұрын
Happy new year! I appreciate the kind words, definitely keep it up as well! I am still running the shark. Thats awesome to hear those changes are working out for you! I want to start upgrading my rear arms and working on that this season! Hopefully soon!
@Fbody_123 26 күн бұрын
How’s it going bro I just got into rc drifting about a year ago I’m using a mst rmx but I want to upgrade to something better what would you recommend my budget would be 500$-800 or even less I’m currently looking at revd rdx yokomo sd3.0 super drift I don’t plan to compete at the moment I just want something good for the moneys worth
@SeanLewisMedia 24 күн бұрын
Ive had more experience with the Yokomo stuff and really enjoy it! Although either of those are great choices! I think the SD3.0 will likely be a better car without upgrades where as the RDX may require some upgrades to get it on the same level. I would even suggest a RD2.0 as a great option as well. Those have become very popular and the after market support would allow you to upgrade one thing at a time to maximize you budget while letting you dial specific problem points:) Its really up to you! But I definitely hope that helps! I wish I could get my hands on more chassis to test for youtube but its just not in my budget right now to do so haha
@Fbody_123 26 күн бұрын
What about a 13.5 ?? What’s the difference between the 10.5 and 13.5
@SeanLewisMedia 26 күн бұрын
The 13.5t is a slower motor but with more torque. At the local track I've found the 10.5t works better for me and my driving style. Its really up to personal preference but I have seen 13.5t being more popular at smaller tracks where the 10.5t seem more popular at the bigger tracks.
@alanbachman6453 26 күн бұрын
The bounce on the lower end shock is much more about not having enough dampening than the quality of shock. If you go up 5 or 10 weight in oil the bounce will go away.
@SeanLewisMedia 26 күн бұрын
Good point! Thanks for the tip!
@anthonyfera2198 27 күн бұрын
What cst oil do you use? Been researching and some people have said you want your front stiffer and your rear pretty soft. Is this something you look for aswell?
@SeanLewisMedia 27 күн бұрын
Hey there! So I'm running 100cst front and back and I use springs to adjust that stiffness. Im not an expert by any means so Its good you have been looking for tips. I personally dont run a super stiff front end. Id say Im running softer in the rear and a medium feel in the front. I like seeing the chassis roll a little. Hope that helps!
@anthonyfera2198 27 күн бұрын
@ appreciate the response, I’ve been having mad spin out issues come to find out my stock plastic rtr shocks were leaking everywhere. Bought some big bores and just looking for tips to increase rear grip. Fairly new RC drift but I’ve upgraded my car quite a bit in the past few months. Had no idea how big of an impact suspension made on these things
@FwBCA_WR 29 күн бұрын
Can I use hot glue to hold it down underneath?
@SeanLewisMedia 29 күн бұрын
@@FwBCA_WR No I personally don’t think it will hold for long and most likely pop off the body. It could rip paint off if that happened. The 3m double sided tape allows a small amount of flex that keeps it from tripping off as easily
@JoshuaDomoslai 29 күн бұрын
Ha this is the video I needed. I used to paintball every weekend or at least a couple times a month with a couple friends from school. (thanks mom and dad) in the late 90s and early 2000s when I was a teenager. Would go to sc village, jungle island near Elsinore, there used to be a fun field off the 91 freeway behind the 200 years of freedom dam, had tons of trenches I don’t think it lasted that long.. Rocked an old Spyder tl + and eventually started using an auto cocker. I’m super clueless about modern stuff. Been watching a lot of vids
@SeanLewisMedia 29 күн бұрын
That’s awesome man! I mostly played at Jungle in the early and mid 2000s and loved it! My dad started reffing at jungle for fun and man it was a good time! Glad you enjoyed!
@HOrkedUP190420 Ай бұрын
This video is awesome! I really hope you are there the next time I go!
@SeanLewisMedia 29 күн бұрын
Thank you! That would be awesome🤘🏼