Bondo, paint, done

It would help if you had a big wide strap too strap the tank down.

I worked at the H-D factory in York PA. for 26 years in the tank and fender dept and we did this all-day removing dents, all hammer and dolly work no fillers, we had sanding belt/polishing jacks, 1st it works better if the metal is warm and bare no paint (if you're going to repaint it), it makes the metal more malleable and you can see where the tool is landing when you hammer from inside the tank, 2nd I had 20 tools, and they were all hammers each rod length was made to reach a different area on the tank and each person made their own sets. you would be better off buying 1/4-inch rod and making your own custom set to reach I retired and still have all my tools it's a technique that requires a lot of patience and time to learn it is learning when to pry and when to use them as a hammer inside the tank and tap the dent out. my tools consisted of 15 different rod hammers, 2 body hammers, 3 dollies for outer skin smoothing. we had a saying in tank & fender " it's not for everybody" a lot of guys bid out of the dept, because this was hard work, and it requires skill. as far as lighting we only used fluorescent lighting, and it takes time to acquire an eye for it also with any bodywork your hands are essential to feeling the surface as you go along for imperfections and smoothing them out to a finished product. I hope this helps you out.

Glue strips and a puller is the easiest way of pulling that out.

Nice find. I'm looking for one just like this. As this is what I learned on, same color and same size. I was about 15 when I rode it a hand full of times. I have always wanted to ride again and never have. well now i'm 57 and feel like i'm running out of time to ride again. If your near Mich. I would love to buy it from you. I was wondering how evaporust would work. I never heard of anyone using it. I also wondered how it would work on stuck rings. Like how you put the oil in the cylinder. Subscribed

Use some tie-down straps to hold the tank.

The plastic tips are for painted surfaces.

Use an inner tube. Suff it in that side behind the dent and inflate it.

The little pieces could be used to extend the tip ..

Du mußt den Tank mit einem Heißluftfön auf ca. 50 -70 Grad Celsius gleichmäßig vorwärmen, damit nimmst du die Spannung aus dem Metall. Anschließend mit dem Ausbeulwerkzeug,. Grüße aus Deutschland

In 1972 I was 13 years old and I bought a green LT2 Yamaha Enduro just like the one in this video but of course it was brand new. I had a ton of fun with that bike.

This worked better than I expected.

The slide is hanging up mine was doing the same the needle should be on the second notch there might be a bur on the slide or the cable could be hanging up we the slide.

I think you are on the right track.Will take some practice.

the air filter is not the standard one

Cool bike, Whatcha gonna do with it,

Great video loved watching, however never, ever use a file without a handle!!

Never mind, it is facing air box. Great looking LT-2

Is the cutout facing the air cleaner?

take the carb off to work on it.. Much easier . you should see the slide bottoming out

remove the gas cap and let it soak in the liquid

f you left the Evaporust in their for a few more days - it will get it all. Doesn't hurt a thing to leave it.

Tape a cellphone flex camera to the end of the tool so you can see what your doing.

I had exact ds80 when I was about 13 which was late 80s it was immaculate and I was an absolute idiot for getting rid of it and it was just as quick as the rm I thought, just not as flashy and way smaller stance.

What a time piece, growing up my two buddies had those same bikes 79-1984

I’m not even sure how many of those tank holders I have made from old hockey pucks :) …… cheers from Vancouver Island BC Canada 🇨🇦

Try Nibbi carbs. They make the best aftermarket carbs. really nice quality. they cost more than the cheap$20 carbs but they are worth it

I cleaned the tank on my 73 CL350. I used Evaporust and it worked great. I strained it back into the jug

Does the chains for the front of the ship come with the model?

Can someone tell me how you are supposed to fit parts E43 E44 to the decks as there is only a semi circle hole yet to fit it need to be a full circle i dont get it. These are the little crane type things not sure what there called but they have the swivel arm. Roy

why does everyone put this music on Titanic videos smfh I mean it's obvious why, but stop lol

Eu devo ter comprado falsificado pq péssima qualidade esse produto, manual não vem com algumas partes e péssimo para destacar as peças, perdi algumas que mal tentei tirar e quebrou 😡

İ WANT YOUR TİTANİC !!!!!! pls link

That's a great Titanic.What a great video! So cool!!!~ I have an RC Titanic!~~~^_^😊😊😊

Where did you buy this kit ??

Buen video excelente y con la musica de fondo queda presiso.!👌🏻🎵🚢🤓👊🏼

I have same model, same scale and size, took me 6 months to build mine.

I have this kit as well,

'she ain't?' Great use of the English language. You must be so proud.

I wish I could change funnel color, lower hull color and wash the decks to look more realistic. Oh well, it was my first attempt. I'm considering buying the 1:200 version. Kind of spendy though.

Good effort and naturally good results!👍

Very nice! I did this same model about 20 years ago. It’s proudly on display in my studio.

so sad that titanic sank even worse with poseidon

Absolutely beautiful well done thanks for sharing 👍👏👏👏👏👏

Yeah.... You really should have painted the hull

Awesome TIT ....anic 👌🏻👍🏻☑️😝🤭 Now let put her in the swimming pool...

un très beau modèle, par contre les bastingages sont decevants , trop épais 😮‍💨

je m'excuse par avance 😁mais je remarque quelques erreurs de peinture, les brises lames devraient etre en blanc , les 4 pièces pres des chaines devraient etre en noir et le dessus en laiton, les cheminée couleur chamois et les fenetres en marron , ainsi que le bas des écoutilles, sinon bon choix de maquette , le modèle de chez Academy est un des meilleurs; j'en ai fait un premier il y a 20 ans et je compte en faire un nouveau en améliorant encore la peinture

You did excellent work on this model, I especially like the thread rigging; you even did the rigging on the little lifeboats. The 1/400 scale looks like it would be a lot of fun to build up, I just did the 1/700 version this week. Academy did a great job on these model kits, the parts are incredible. I didn't attempt any rigging on mine, at 1/700 scale even thread would be close to 10 inches thick, but on your scale it looks fantastic. Great job all around, what a display piece!

She's perfect, It doesn't matter. A.nice work, by the way, your Titanic.