you should have applied hot air to soften the aluminum tape, it could come out easily without breaking it, as well its stickiness could be activated again by hot air.
@jsteidel02 ай бұрын
Thought: Cut that heat-shrink tube diagonally to get a band that has a bigger opening than the normal tube. Maybe criss-cross them?
@vladislavkaras4912 ай бұрын
That was not hard at all! Thanks for the video!
@ranimungcal3 ай бұрын
thank you for sharing ill should try this later! update....it worked for me!thanks again!
@Valicu11i3 ай бұрын
Hi so im having a problem whit my laptop turning on but theres no display on screen i checked the ram, hard disk, and the screen display cable. Still not working could that have anything to do whit th e bios battery?
@ArronWard-ts2iv4 ай бұрын
You're a life saved man❤❤❤
@xtroncool0079 ай бұрын
Good Vid mate Really helpful thank you Regards from the UK
@khalidmohamed938411 ай бұрын
thanks
@24hourgmtchannel64 Жыл бұрын
I know this is a little late but HVAC aluminum tape can be bought at any big box store for a few dollars and athough its conductivity is slightly lower than copper's, aluminum tape offers excellent electrical performance and shielding characteristics.
@skullagent6 Жыл бұрын
Can't find this battery I have acer laptop
@John-p6n1n Жыл бұрын
I recommend using this LJ-CMOS-4 battery.
@jefflemberg645 Жыл бұрын
It's not even the money, it's the fact that you can use a battery that you know is fresh, instead of one of those pre-sealed ones that could have been on the shelf and worse than the one you're replacing.
@mick1937 Жыл бұрын
Allow me to give you a battery hack. Never touch the terminals of the battery with your fingers because you risk discharging it.
@apersonwhoknows Жыл бұрын
I'm sure you can just take out the battery itself and not the whole plug in entirely.
@doumbiasekou5895 Жыл бұрын
Thanks a lot in africa it is hard to find thes battery ❤
@Spiritgumm Жыл бұрын
I bought a replacement cmos battery on ebay but the laptop still had the bios error. After days of looking for a solution, I finally took the battery apart and tested with a meter, found out it was dead. I was looking to see if I could salvage the wires by swapping in a battery I could buy in a store, like this video shows....however, reviews of those specific dollar batteries say they're often dead too, so I recommend testing them before doing all the work shown.
@jeanpeuplu4772 Жыл бұрын
hi did not work for me!
@umvimages Жыл бұрын
I can stick them first with a small copper foil tape before covering with electrical tape
@amittyagiat80Ай бұрын
Actually that's better approach.
@tobeasaleman3898 Жыл бұрын
Thanks man!
@yellotech Жыл бұрын
Absolute lifesaver. Earned another sub
@Lehexterminadora Жыл бұрын
Obrigado pelo vídeo!! Salvou brasileiros 🤣🤣🤣
@jrgmty7685 Жыл бұрын
The things you call tape are terminals spot welded on the battery. But yeah conductive tape does exist.
@Spiritgumm Жыл бұрын
The battery will explode if you try to solder the wire directly as shown in another diy video: kzbin.info/www/bejne/a3XHco2oib-de68
@jrgmty7685 Жыл бұрын
@@Spiritgumm spot welders are designed for welding batteries. Don't you know what a spot welder is?
@Spiritgumm Жыл бұрын
@@jrgmty7685 Nope, but I thought it was worth sharing the mistake that other guy made.
@jrgmty7685 Жыл бұрын
@@Spiritgumm that's good 👍
@justaguy4real Жыл бұрын
Dude that's not a hack. It's just a battery replacement
@rahouljasuja Жыл бұрын
thanks ❤
@stephanieann9890 Жыл бұрын
I have a pc and am trying to remove one of these batteries. It’s hard to get out and I don’t want to risk breaking it.
@mandelkuchen22882 жыл бұрын
Thanks for nothing. Now my CPU usage is 100% for no reason
@MikeBe-qb6dr2 жыл бұрын
I have a Asus Vivobook X540MA and would like to know where the CMOS battery is located, I have opened the vivobook but can not locate the CMOS battery. "help"
@laurentiuilina49922 жыл бұрын
I did the same at my playstation 2 ! I put the contacts wire on battery and after that i put the tape. Work very good.
@LoggKet2 жыл бұрын
thanks for showing us a cheaper option , I would not trust the contact that what you just have taped up , I would have solder them for firm contact then tape up
@twotentech47472 жыл бұрын
thanks for watching, its been about a year now more or less and its still working, if you solder battery might blow up, please be careful
2 жыл бұрын
Why on earth would you need such a firm contact on a CMOS battery? 😄 You can even cut those tabs off if you want, peel a centimeter of the insulation and use an electrical tape to attach the wires to the battery, just as TTT did, then use a piece of double sided tape to attach the whole thing to where it is supposed to sit in the laptop.
@gabed55852 жыл бұрын
Why was the video cut??
@leonscottkennedy44142 жыл бұрын
Awesome THANKS Good job👍👍👍👍👍
@slicktracksmusic2 жыл бұрын
Not working for me in mbr partition system, if I convert to gpt partition, will it work?
@dcuervog2 жыл бұрын
Your hack method is worked for me. I replaced a 2032 CMOS battery for my HP DM1-2000 series laptop, following your video. Thank you so much!
@Tukanoss2 жыл бұрын
does this one change the quality of the video?
@naufalkharits2 жыл бұрын
I don't have a hair dryer, what happens if I don't heat shrink the electric tape?
@bond007xxx Жыл бұрын
As long as the connection is "tight" / firm , there should be no loss of electrical contact. Taping it securely and pressure from laptop case should keep wire contacts in place fine. Normally these are spot welded with a special spot welder (doesn't overheat the lithium batt).
@noobyasuo52322 жыл бұрын
Lair . My pc is not working now
@demontagemontage2 жыл бұрын
thank you
@jay-arabano61282 жыл бұрын
becareful when checking that box,, it makes your computer blue..
@rez842 жыл бұрын
Help me please. How should I fix the blue screen?
@noobyasuo52322 жыл бұрын
It happend to me
@kosmotownsend66092 жыл бұрын
Does this process work if there is an account on the new device?….
@tamyboy12 жыл бұрын
How do you know battery was not rechargeable ? Don't think you can just swap then.
@ACOnetwork2 жыл бұрын
CMOS button batteries are always non rechargable, same for PC and laptops it is just to keep custom settings and time.
@maskednil3 жыл бұрын
Thank you for your video. This helped me a lot for my PS3 FAT CMOS battery replacement. So what I want to contribute is to add something that could be helpful to others. I first used a papercutter and bend the metal tabs upwards all around the perimeter. My tabs had 2 placed spot welded. So I them put the tip of the blade onto 1 spot and hammered down a bit. I am lucky my paper cutter has a metal body instead of a plastic one. I did not need to hammer hard. This dislodged the first spot which I could then twist free. I repeated this with every other spot and got the tabs out cleanly. No cuts, breaks, or holes.
@hucinus85883 жыл бұрын
Hi guys , i have the only solution weach worked for me on windows 10 ( i am here just for help) My case : - i have 2x 8gb of ram (16gb total) -both detected on bios. -both detected on system but 8 gb usable and 8 gb reserved weach is the main problem. -i tried every software tips like reg edit/boot options in system and bios and nothig worked . The Solution is manually: 1- turn off the pc . 2- remove the rams and change their places ex: ram 1 on the ram 2 slot and ram 2 in the ram 1 slot place, if not worked do next step . 3-run your pc with just one ram (RAM1) , and work with it like open a browser or some thing and shut the pc down . 4-run the pc with just one ram (RAM2) and continue to the system to use it and shut it down again. ( if your pc doesn't run with one of them and the pc restarting automatically many times dont be afraid as this is very normal for the bios to read the new placement of ram ) 5- the final step is to do both rams and turn on your pc with both of rams and , tadaaaa , you should see the full ram usage on the system info and all the softwares infos i found this solutioin my self and i hope this should be work for you too and for every body.good luck
@acidcodm68803 жыл бұрын
Not working
@gameing007-co8ec Жыл бұрын
And what if someone have 2 slots like in my case I have B450M gaming motherboard that have 2 slots for ram i am so tired man why it's not fixing ahhhhhhhhhh 😶
@twotentech47473 жыл бұрын
🔥Check out the Netgear NightHawk on sale from Amazon Here ► amzn.to/3ATFM0v
@JanburnTechShop3 жыл бұрын
can I replace 2025 with 2032 cmos?
@rogergeyer98512 жыл бұрын
Janburn Dayanan: The voltage, the current, and the size all matter. There is a reason for the various battery numbers. I wouldn't be substituting without knowing what I'm doing, as I don't know how sensitive the tolerances for different voltages or currents the laptop components might have. Actually, you should replace whatever your laptop has with the same type of battery, to be safest.
@TitaniumTronic2 жыл бұрын
NO.
@JanburnTechShop2 жыл бұрын
@@TitaniumTronic actually we can...i tried it and made a video about it
2 жыл бұрын
@@TitaniumTronic of course you can. The only difference between CR2032 and CR2025 is capacity. CR2025 being thinner will have lesser capacity, therefore it won't last as long as CR2032.
@herkyhawk20033 жыл бұрын
Awesome and Thank You TTT
@atmsc4nd4l3 жыл бұрын
how about aluminum tape?
@rogergeyer98512 жыл бұрын
Alexander Montero: Another video I saw on this mentioned either copper or aluminum tape as examples. The idea is apparently good quality conductive metal tape, to ensure a solid connection that will last.
@edabellon75123 жыл бұрын
fuck this tutorial made my pc blue screen of death
@Lucivius273 жыл бұрын
My repair guy give another solution and it fix my issue. Pull out the ram stick and clean the gold plated part with ordinary eraser maybe it just got dirt. It is so simple I feel dumb.
@bubbatennessee75313 жыл бұрын
I think the tabs are supposed to be welded onto the battery casing
@yuhanchen13863 жыл бұрын
Yeah, I don't think it's tape; looks like two strips of metal that were spot welded onto the battery. Looks like the guys at Lowes weren't crazy after all lol
@twotentech47473 жыл бұрын
You will explode battery if you try and weld it yourself
@vegasdevl843 жыл бұрын
Those connectors ARE spot welded on there from the factory but, if you try to solder those contacts on yourself that battery has high chance of exploding. This hack will do the job just fine. Good job on saving the metal strapping. Makes it so much easier. They do sell copper conductive tape for taping down bare wire/metal to the other surface that is conductive. The conductive tape gives you better chances for a solid connection by increasing the total contact surface area. That was probably more info than you needed. Loved the video, man. Thanks!
@rogergeyer98512 жыл бұрын
bubba: That was my initial thought, but other videos, including one that actually show such a battery EXPLODING while trying to weld it say NO. Not using a weld is why the conductive tape (like copper) to give a GOOD and secure connection, AND tightly wrapping in plenty of electrical tape AND heat shrinking the tape a bit is all a good idea. With the pressure of the laptop case on that package, that SHOULD provide a secure connection for years, assuming you're not playing rugby with your laptop.
@umvimages Жыл бұрын
But other laptops only have cmos battery sitted on board and not welded
@CubanMofo3 жыл бұрын
How about if I go get a free phone with a new line. Can I use the free phone to switch to another exciting metro phone line I have ? Lol