Iain Brew

Пікірлер

@tobiasxxx1742 22 күн бұрын

I´m surprised, that the cx-410 performed so much better than the 811

@chadspinalbosd007 Ай бұрын

Didnt do any kind of zoom comparison

@beeher4728 4 ай бұрын

When u play prop hunt

@StephanusYanaputra 4 ай бұрын

Thank you for a straightforward setup & demo!

@CCCC-tq8yo 7 ай бұрын

Ur tree grew 5 ft taller

@CCCC-tq8yo 7 ай бұрын

11 months later it's old now

@IainBrewSydney 7 ай бұрын

Camera is still working perfectly however!

@IndialanticRob 9 ай бұрын

Thank you

@moviestreamer2817 9 ай бұрын

When you turn it on like plug it right into the wall does it just start running in slow mode or does it do nothing

@IainBrewSydney 9 ай бұрын

It depends which mode you leave it in i.e. if you leave it in show mode, it will boot up and automatically start. If you have DMX connected, it will turn on, calibrate and then wait for DMX information before doing anything

@moviestreamer2817 9 ай бұрын

@@IainBrewSydney so basically if I use the buttons with the digit LEDs on the back and set it to slow mode then unplug it and eventually plug it back in it will automatically do that mode I left it on?

@IainBrewSydney 9 ай бұрын

@@moviestreamer2817 That's as I remember it - I can test this out later if that is helpful

@moviestreamer2817 9 ай бұрын

@@IainBrewSydney yes please, can you send me the link to this product because I know on Amazon there are a lot of different companies with Simliar looking ones but want to make sure they do what I said above ^

@speedstatus9 Жыл бұрын

May I ask what light the motion is triggering? Is it a separate motion sensor flood light or the light on the camera? My CX410 just arrived yesterday and it had an issue with the "vehicle detection" staying on when nothing was in the frame, so I manually updated it and it fixed that but seemed to have taken away everything else, like it doesn't even have the option to trigger the light on when it senses motion, all the light options are gone. So much about the one I have is so different from what I've seen on YT from you and a few others. It's like Reolink takes away all the key features that made this great in the first place, or at least changes them in a bad way. Also mine does the most annoying thing I've seen in these cameras yet, it freezes and lags for a good 1.5 - 2 seconds when an external source of light is introduced. For example I had a flood light mounted directly underneath all perfect and ready to go and once night hit and the light was triggered on by motion, the light would make the camera "transition" or something causing it to freeze for a bit. Idk if it's going back and forth to some kind of "day mode" then "night mode" but it's annoying as hell. It does it when the external light shuts off after 20 sec. as well. My only solution so far is to move that external motion sensor light from underneath the camera about 6 or 7 feet away and around a pillar that kind of hides its bright shine. Such a great camera for night but terrible decisions on certain features. HDR setting ("Off" and "Auto") doesn't even do anything to my camera for either option. There's an "Infrared Lights" ("Auto" and "Stay Off") option that does absolutely nothing as well. I thought this camera didn't utilize IR lights? Also, the image is incredibly over exposed and the one lamp on my street at night is beyond blown out, the whole left side of the image is way too bright. Any detailed feedback from you would help a bunch ha, I appreciate the vids you made as well. Thanks.

@stuu3270 Жыл бұрын

I just bought one too. Frustrated at constant vehicle detection for parked car on my driveway. No person detection. I downloaded the latest firmware and updated the camera. Now works perfectly. Try that if you haven't already. Mine was two versions behind. Reolink support have been quick and responsive too, which is nice.

@speedstatus9 Жыл бұрын

@@stuu3270 Thanks for the response. Yea I actually manually updated the firmware on the camera via usb drive and it took care of the non-stop "vehicle detection", but then when I went into all the settings they were all either changed or now missing lol. I'm currently having an issue with my camera doing this "transition freeze" thing whenever an external source of light is introduced too close to the camera. I've seen other folks say they have the same issue on Reddit. I moved my motion sensor flood light about 7 or 8 feet away around a small pillar, still aiming towards what the camera sees, and now it's fine, the light will turn on seamlessly and there's no "freeze" or "pause" on the camera. Smh lol such a great camera at night though, I will say that.

@stuu3270 Жыл бұрын

Fps setting maybe? Other than that I can't advise. Mine is all good.

@stuu3270 Жыл бұрын

At first I felt I should have gone for a 12MP the 1224 I think it is, as the daytime image is much the same as my old Hikvision... until I saw the nighttime footage. I wanted to replace the horrible Hikvision UI and lack of browser support, as well as crap night vision with a lot of ghosting. So this Reolink option does the job.

@stuu3270 Жыл бұрын

Out of the two, I'm still thinking the cx410. Having used both, what are your thoughts?

@VastardokKukiao 7 ай бұрын

have both

@paulsp2693 2 күн бұрын

811 got wider field of view despite having lesser resolution and MP, 410 bigger sensor but no ZOOm ability.

@stuu3270 Жыл бұрын

Can this record to NAS?

@IainBrewSydney 7 ай бұрын

In a few ways i.e. it could be used with Synology Surveillance Station which runs on their NAS, or it can offload via FTP to a NAS

@stuu3270 Жыл бұрын

Hi, is this at night without lights on? As in, is this the night colour mode on its own?

@IainBrewSydney Жыл бұрын

Hello. That is correct. Any time the CX410 is shown in colour mode it’s without any lighting from the camera (unless specific by the on screen text)

@vinland98trance Жыл бұрын

Nice post with great quality. Too bad you edited out my favourites

@chriswilloughby48 Жыл бұрын

I loved this concert so much. I was lucky to see them in Melbourne. Thanks for posting.

@TheArtist441 Жыл бұрын

Hi there, nice showcase. How far is the street where it detected you walking past the gate +- from the camera?

@IainBrewSydney Жыл бұрын

From camera to footpath on the street it's around 15m

@TheArtist441 Жыл бұрын

Perfect, thanks so much!

@JePeVePe Жыл бұрын

hahaha funny, the first shots, I was like 'man, that's a bad resolution in daytime' ... but.... it's at night hahaha...

@SteveCanon453 Жыл бұрын

Currently have 4K reolink D800 cameras considering replacing some of the cameras with this model. Please help talk me into it.

@IainBrewSydney Жыл бұрын

These cameras are a great addition to mix in with the 4K range where you need night time colour performance or where Infrared won't work well - the 4K does have a bit more detail in black and white, however the colour performance of this camera is fantastic in low light conditions

@IainBrewSydney 7 ай бұрын

There is now a CX810 which is just like this but 4K - so even more reason to go for that model in your setup!

@MrSnebar Жыл бұрын

What FOV is the RLC811 model? 2.8 or 4.0 mm?

@yogimels Жыл бұрын

Hi great video! How high up was the camera mounted in this testing?

@IainBrewSydney Жыл бұрын

Around 4-5 meters from the drive way (which cuts into the ground) and I would say about 4m up from the level of the grass/ground to the right of frame

@abaskhalid718 Жыл бұрын

Hi, roughly how high up have you mounted the camera? Thank you

@IainBrewSydney Жыл бұрын

Hi there - the camera is around 4.5-5m from the bottom of the driveway, around 4m from the grass area you can see to the right of frame (the driveway slopes down from the street to a garage beneath the camera)

@dutchy1942 Жыл бұрын

Very informative videos. The CX401 is a fantastics camera, especially at night. I view the video throught my PC browser, and see a stuttering effect when people walk passed. I this due to the fact that I use a browser to view the video? I do not see that in your test videos. Please help with that.

@IainBrewSydney Жыл бұрын

Hi there - I haven't had the stuttering effect on any of my devices. Do you see this with any other ReoLink cameras you own? It may be the PC is underpowered or struggling with the 4K video. Try looking at it in 'fluent' mode

@setiawanliem5196 Жыл бұрын

HI, which nvr system will work or compatible with this reolink CX410? Nice review, Thank you

@IainBrewSydney Жыл бұрын

Hello! I am using a ReoLink NVR but have also used Synology Surveillance Station. The cameras have ONVIF which means they are compliant with any ONVIF NVR (ONVIF is an open standard for security cameras and recording systems). You may lose some features though depending on the capabilities of the NVR you have.

@andrewking6604 Жыл бұрын

Great video. Good answers to questions. Thanks

@thegrimmer Жыл бұрын

Loudest walker ever

@IainBrewSydney Жыл бұрын

Crunchy leaves, loose casual slippers weren’t a good combo for this test it seems 😂😂😂

@victorvek5227 Жыл бұрын

Amazing nighttime performance but, as expected, the 4MP leaves much to be desired by the way of resolution. I hope Reolink listen’s to the crowd and offers this new tech in their 8 & 12MP products.

@JePeVePe Жыл бұрын

still, if I see the 4K versions of the other models of Reolink, most, don't improve much. Sensor is mostly 'too small' and, as always, less MP's on a sensor, mostly improves low light.

@maxamillionschnell Жыл бұрын

What brightness level were the led's at?

@IainBrewSydney Жыл бұрын

Both cameras were set to 100%. During my testing, the CX410 didn’t need to use its warm LEDs to illuminate the scene. It seems the loan streetlight across the road was more than enough to effectively illuminate the driveway.

@Underdog271 Жыл бұрын

@@IainBrewSydney wow , that’s really impressive

@YukonHawk1 Жыл бұрын

Thank you for posting these videos. I am definitely getting this camera.

@agussarmento2764 Жыл бұрын

Kalau putus lampu nya apa ada yg jual?

@IainBrewSydney 9 ай бұрын

Sorry I can only respond to comments in English

@cidasantos70 2 жыл бұрын

Tem aq

@louislubiano8839 2 жыл бұрын

pa help bakit nag auto rest yung gobo

@calklobuchar 2 жыл бұрын

U head anyone go blind from sh ocerspray?

@calklobuchar 2 жыл бұрын

U hear anyone go blind from sh overspray

@blueryan12346 2 жыл бұрын

Macdonaldtown is the funniest name in Sydney

@ameerbarakat3499 2 жыл бұрын

So bad How long has this k7 with you?

@IainBrewSydney 2 жыл бұрын

Only 11 months and not a huge amount of use during that time either (i.e. it's been used well within its limits and specifications). Karcher have responded and are looking into the matter

@hughdonovan6179 Жыл бұрын

Did Karcher ever give you an explanation of your K7 issue, mine has done the same and is now pulsing water vertically from the wash bottle inlet

@virgiliofachetti4413 2 жыл бұрын

5:20

@virgiliofachetti4413 2 жыл бұрын

3:38

@rishad_travel_diaries 2 жыл бұрын

Lovely performance :)

@TheSupermodder123 2 жыл бұрын

Keep up the good work!

@nolawilson2008 2 жыл бұрын

can,t see what your doing ...from Australia...just started watching this ...it,s annoying too far away

@OliverrandontheRails 2 жыл бұрын

Anyone here from quagmire toilet gaming?

@LadiesMan21766 2 жыл бұрын

Yes

@marcoortiz4579 2 жыл бұрын

The best video so far, Gracias.

@seanlott8651 2 жыл бұрын

Hi does anyone her have a fixture profile for this light? I can not seem to find it anywhere and I’m trying to incorporate two of these mover into a show using the light key software on my mac. Please help a fellow LD out! Much Love everyone ! 💗

@IainBrewSydney 2 жыл бұрын

Hi Sean - I'm also a Light Key user! I ended up making my own fixture profile for the Illumsolid lights. I haven't got one for this, but it's not hard to make one following the instruction manual which came with the light.

@billybolton6555 3 жыл бұрын

i came here to show my girlfriend how she sounds when she uses the toilet.. thanks lol

@itayah8533 3 жыл бұрын

1:41 is missing

@mewmow3930 3 жыл бұрын

Thanks for this. Your the best demo video here. Direct to the point and no talking.

@okpajames1457 3 жыл бұрын

How much pls

@IainBrewSydney 3 жыл бұрын

Best to check it out on the Illumsolid store on AliExpress to get pricing for your country.

@brownpunk1794 3 жыл бұрын

Hi..im going crazy..mine keeps leaking from the place where my hose connects to the machine..i have swapped out the hose connecter as well..any ideas? Thnx in advance

@IainBrewSydney 3 жыл бұрын

Is the leak coming from inside the machine, or around where the connector screws in? If the former, it may be internally cracked. These machines seem to be primarily plastic so can fatigue over time

@brownpunk1794 3 жыл бұрын

@@IainBrewSydney from the hose connector end..i did replace it with new one just in case.same result..i just clicked in and thought it wud work

@IainBrewSydney 3 жыл бұрын

@@brownpunk1794 Are you sure it's not the bit where your garden hose goes into its connector which is leaking? I've noticed sometimes there may be some minor leaking due to the pressure - to clarify, is this the high pressure hose to the lance, or the garden water connection at the back?

@brownpunk1794 3 жыл бұрын

@@IainBrewSydney water connector to the back that goes straight to machine .thanks

Ең жақсы KZbin

Пікірлер