Hey man great video. Question for you, has the A6 transmission been pretty strong running that high of horsepower? I’m guessing it’s got a supercharger or something like that. Does the A6 transmission run just as strong as a manual transmission?
@frias22872 ай бұрын
Nice job bro 👍
@SlowDelSol3 ай бұрын
Best video on this. Great tip about leaving the bolts lose until you square it up with the top. Makes it a night and day difference.
@rodlively10553 ай бұрын
Is it only four resistors. Or eight
@streetguru30544 ай бұрын
Would love to see how that wheel looks in the night
@aiyanahoaglin8925 ай бұрын
Will this work for a 2002 c5
@inquo93046 ай бұрын
Good video bro
@shiftin2gear3996 ай бұрын
Thanks man!
@matttracy067 ай бұрын
I just ordered mine for my vette, where did you end up hooking the red wire off the steering wheel to? Did you quick connect it to the blue wire on the main plug-in that’s clipped to the wheel or to another 12v source?
@shiftin2gear3997 ай бұрын
We used a power probe to check who gets 12v constant with key on. Diffrent vettes with diffrent options will have diffrent color wires. We suggest using a volt meter of some type to identify that 12v source.
@johndough31327 ай бұрын
I need to know where you got that interiors from
@shiftin2gear3997 ай бұрын
All custom made brother.
@HaydenZ067 ай бұрын
is there anyway to change the wheel speed to mph instead of kph?
@shiftin2gear3997 ай бұрын
Yes there is. You can call the shop and I'll walk you through it
@HaydenZ067 ай бұрын
@@shiftin2gear399Awesome, I’m gonna order it tonight. If I can’t figure it out I will be calling. Thank you
@giorgosntaramaras39988 ай бұрын
very good result, I have two questions, what brand are the rims and what are their dimensions
@shiftin2gear3998 ай бұрын
I'm not sure but I will try to find out for you
@lonnieblackwell92158 ай бұрын
Just wondering if that would work on a 2004 Vette? Good video, very informative.
@shiftin2gear3998 ай бұрын
We do not believe it does. A few good users below gave some insight on the 04s
@ARivers-g7l8 ай бұрын
I JUST VIEWED YOU VIDEO VERY AWSOME, I HAVE A 97 C5 MANUAL TRANS. THE 10 WATT 10 OHM RESISTOR. WILL THAT WORK IF ITS MANUAL TRANS? THANK
@shiftin2gear3998 ай бұрын
Yes ! This car is a 6spd!
@igorosinski42448 ай бұрын
nice job 💪💪 I have questions were are you buy window mechanism?
@shiftin2gear3998 ай бұрын
Any local autoparts store should carry it. Or at least provide a part number to cross on the internet
@mikefew423210 ай бұрын
What are you going to do with the valve covers you took off? Maybe send them to the first person to comment? Or to your 100th subscriber? Either way that would be me. Just saying, by the way Excellent install on a super clean Vette. Keep up the great work.
@shiftin2gear39910 ай бұрын
I'm not sure what I'm going to do with those. But that's a great idea! Will let you know what we decide. Thank you for watching and your support
@roygordon494610 ай бұрын
i heard on the manual c6 tranny and diff fluid change that you had to run the car in 2nd gear for a min is that true or do you just drop the cardown and just drive and do the figure 8s im doing mine for the first time so idk.
@tayk661511 ай бұрын
Damn you know your stuff! I have electric regulators sitting waiting for install and this is really good for visualization
@shiftin2gear3998 ай бұрын
Thank you !
@nitrousstang Жыл бұрын
do you have a broken cradle bolt?
@nitrousstang Жыл бұрын
*trans mount stud
@shiftin2gear39911 ай бұрын
Nice catch. Yes I did. It has been fixed since then
@nachosilva3777 Жыл бұрын
Can anyone help me please! I got a inaoperative shocks messege today on my c5 after installing new wheels and tires! And can go over 80mph messege as well. Does anyone know what could cause that?? Thanks. Also the tires sensor not being programmed yet.
@privnceee Жыл бұрын
Did it clear the code?
@shiftin2gear399 Жыл бұрын
Yes
@privnceee Жыл бұрын
Did u clear it with a scanner?
@shiftin2gear399 Жыл бұрын
No, that's what the resistors are for
@remixz23 Жыл бұрын
Can i do this with 2012 corvette ?
@jasonmacneil2256 Жыл бұрын
What the F is a ZR6X??😂😂😂😂
@shiftin2gear399 Жыл бұрын
It's the badge option for the suppervettes wide body kit. Google it
@jasonmacneil2256 Жыл бұрын
@@shiftin2gear399 oh! Learn something new every day😊!
@sleestack6455 Жыл бұрын
Hooked mine up today and it turns on when I start the car the screen turns off the leds at the ends flash red for about 10 seconds then the whole thing is dead nothing makes it turn on???
@shiftin2gear3997 ай бұрын
Check your installation. Make sure you have the wires properly installed. It is very possible you could of received a bad wheel
@theblackice6672 Жыл бұрын
Hello bro It doesn't work with my 2003 c5. Do you think it's need programming or something else?
@SlipFitGarage Жыл бұрын
Hi, I have a C1761 code for "Right front position sensor out of range" on my 1998 C5 with F45 suspension. If I install the four resistors like you did in this video, (one at each corner of the vehicle) do I need to do anything else with the position sensor itself??? And just to clarify for myself.... the resistors go in place if the shock wiring, and NOT in place of the ride position sensor wiring, correct? Thanks in advance!
@SlipFitGarage Жыл бұрын
Update.... I was able to use my Autel scan tool to removed the F45 "real time dampening" suspension from the ECM in my C5. It was the same process as if I used a GM Tech II. So, anyone who reads this.... you do NOT need specifically a Tech II do delete this suspension from your car. There are other scan tool on the market that can do this.
@shiftin2gear399 Жыл бұрын
This is great info!! Thanks for sharing!!
@Strib420 Жыл бұрын
My dealer refused to reprogram. Thx for the suggestion of plugging in. I would like to have seen which wires you soldered.
@Joseph-br9tq Жыл бұрын
Do you know what percent of the trans fluid occupies the radiator? I did a rad swap and am wondering how much fluid I lost. I’m planning on draining and refilling fluid regardless, just wondering how urgent this would be
@shiftin2gear399 Жыл бұрын
I would advise to at the very least Check the transfluid level. The fluid should be coming out but just barley. Check it a few times after short drives to make sure it's filled properly
@renatogonzalez5460 Жыл бұрын
ok i need help. in my car the conector is three cables. in witch cables i have to conect the resistor?
@michellesmith8207 Жыл бұрын
Will any 10 watt 10 OHM resistor work?
@michellesmith8207 Жыл бұрын
Where can I buy the resistors
@kobuk2412 Жыл бұрын
I'm looking too!
@link9alink9a71 Жыл бұрын
If l use 12V source from horn wire are the led sty on even when l turn the car off ?
@shiftin2gear3997 ай бұрын
Good question, I apologize for the delay in our response. KZbin does not always notify us when comments are made. What did you end up finding out.
@dannyzepeda3091 Жыл бұрын
Will this work on a c6 ?
@Esteban-bv7lr8 ай бұрын
No
@pedrobenson Жыл бұрын
I have a tech 2 clone and can do it for $100
@01dagster Жыл бұрын
Can you use the tech ll if you have already removed the shocks ? 2003 magnetic ride.
@esevendb Жыл бұрын
Bruh this worked for my 2000 C5. Thank you!!!
@shiftin2gear399 Жыл бұрын
Hell yea!!
@Xr1ffxr4ffx Жыл бұрын
Do i just put one each on each gap ?
@Xr1ffxr4ffx Жыл бұрын
Bro i bought the ones from amazon you have linked on here and their way shorter then yours
I got a c6 with f55 shocks. Dropped rear end to see my rear shocks the connector on both rear shocks was destroyed made me wanna delete ride control. What ohms do I need for c6 gs?
@shiftin2gear399 Жыл бұрын
It varies depending on model corvette. You will need to check the resistance on the sensor itself. Make sure to use the same resistor for both sides.
@sspp3065 Жыл бұрын
That's only if you have active ride control correct.
@shiftin2gear399 Жыл бұрын
Yes correct.
@christopherolivares6211 Жыл бұрын
OK so I just bought a 2002 Corvette C5 and this was on my dashboard as well Cant go above 80mph checked where you plug in the 10 watt 10 ohm resistor. And it’s still plugged into the OEM plug do I just unplug it and plug in this new one
@shiftin2gear399 Жыл бұрын
Yes. Unplug and plug in the resistor
@shiftin2gear399 Жыл бұрын
Yes. Unplug and plug in the resistor
@tallerdefab Жыл бұрын
You safe my ass.... Thanks men !
@shiftin2gear399 Жыл бұрын
Anytime !!
@Teramydog Жыл бұрын
try washing your hands once in a while
@shiftin2gear399 Жыл бұрын
Lol.
@jai1185 Жыл бұрын
Awesome vid. I’m bout to be the owner of a 2013 C6 GS, 60th anniversary edition. Is this steering wheel compatible with it? Thanks
@shiftin2gear399 Жыл бұрын
Thank you. Not sure if it is. I would reach out to vq customs for fitment on your specific application.
@jok3r3152 жыл бұрын
Sell me the car
@shiftin2gear3992 жыл бұрын
Sure. Shoot me an offer
@piig942 жыл бұрын
Before changing the fluid were you noticing any problems getting the car into gear at higher rpm? 2007 c6z just did hci fbo and I am assuming the trans fluid is low..thanks in advance
@piig942 жыл бұрын
And of course the radiator was pulled out lol
@shiftin2gear399 Жыл бұрын
No my trans was fine. You can call the shop and i can chat with you about your issue. 844-471-4327
@piig94 Жыл бұрын
@@shiftin2gear399 Hey thank you I will be sure to give you a call
@MatthewROlson2 жыл бұрын
I am not sure if this is the same thing but I have a 2000 C5. Just got it and am not sure of its complete history. When I set my cruise control it will read double what I am actually going and if that doubled reading is over 80 it will shut the cruise off. If I set the cruise at 30 it will read 60 and work fine. But it is of no use on the highway.
@shiftin2gear399 Жыл бұрын
We do not think that this would be in anyway in relation to what you are experiencing. We recommend finding a local to you late model GM shop that could diagnose the issue properly 😀