@63melvyn I was actually looking to buy a merry fisher but concluded we would get more use out of a cruiser, got to love the American boats , I was actually looking for a bigger boat but concluded unless i put a lot more money in there is nothing to make me change .

@MartinDay-g4q we will one day , the weather was supposed to pick up the following day so we decided to steam on , it was bad enough from Flamborough head to spurn point , wouldn't have wanted it to be any worse lol 😀

@maceyevo I never really wanted a boat up until 3 years ago , now I love it 😀, I think it makes a big difference that we can stay on it for a few days though .

i was told not to buy aboat by a few people , we love it though and its one of the best things we did .

@@chris-living-the-dream it made me smile.

@badfairy9554 that's good to hear

@fat_tommo_goes_boating thanks , I don't think we will to be honest unless something changes drastically, if we turn left out of the marina there is a pub that you can moor up and stay a couple of days , less than an hour to Lincoln city centre and it's only £16 a night for a pontoon mooring with free electricity. Turn right and a small village with pubs and takeaways with riverside mooring, and less to two hours more moorings and a pub for meals . If you have a few days spare you can lock out to the river trent and head for newark and Nottingham with moorings on the way to stop for a break of a bar snack . We also have some great neighbours at burton waters . The sea was good for me as I like fishing but not much good for everyone else when they feel sick lol . I would still however spend some time on the south coast and western Scotland one day .

@paultrout7633 it's a good distance , we should have stayed overnight at scarborough but we had half decent weather so we just carried on , Flamborough head to spurn point was rough for a few hours but the rest was great .we love it at burton waters.

@@chris-living-the-dream Thanks for the advice. We are thinking of stopping off at Whitby. Hartlepool, and on up to Amble. I'll try and catch up sometime at Burton especially as we are big MX fans also.

@@chris-living-the-dream we loved burton waters, my wife’s favourite marina. My only frustration was the distance to the Trent. The marina is fantastic, great facilities, staff and support. We did a bit at Newark which had great access to the Trent, the. Moved ours down to Brixham to enjoy the Devon coastline. Enjoy BW’s👍

@christiansymonds Brixham would be fantastic but too far to travel for us . Burton waters will be good for us as we are relatively new to boating and it gives us more opportunities to get out and gain experience and confidence to go into different marinas .

@simonmills9427 thanks for the sub , much appreciated. If you look back I have some videos of the boat but I can do a new one in the future for sure .

@@bikevault2302 I got it from eurotek in ripon ,

Thank you! Cheers!

No , some friends took me riding 😁

@@drewchadd yeah , I had good body armour on

@franciscojavierhernandezfe7817 thank you

It's a great bike but unfortunately I don't get time to ride it much at the moment as I have too much going on , I'll make an effort to get out on it again soon 😊

Heck ya. I was thinking of trying to pick up a leftover 23 or 24 once these 25s drop

@@ClayFick 23 and 24 are the same bike

Yessir can't go wrong!

Cheers pal , much appreciated

Thanks

Sorry I'm not great at videos, I'm not much of a talker which doesn't help . I will get a video next time I'm out , I did test them this weekend but it kept timing out so I have connected a ignition live to it to keep it awake .

Cool , it wasn't warm enough for covers off up north.

It's in the gopro quick app , it's a bit of a pain to edit with it in though .

Thank you , I'll try to put another out soon 👍

It was Acerbis 2 part armour, vest with shoulder and elbow protection and a hard shell to go over the top , unfortunately not much side protection 😔

It's an expensive way to avoid the ulez 😁, but it would have been a cool publicly stunt if that's what they were up to 👍

wish id have gone , tommy looks a great crack

Thanks pal 👍

They are an awesome car , I think you have to be careful when you buy one though as parts are expensive and I was told it's common for people to shift them on after they get a bill for several thousand pounds for parts that need replacing.

Yeah I know...but I'm looking at a mc shift not autobox version 2013 S models

@@kamikazekaos MC shift is super system to drive, but they do run through clutch plates every 10-12k and cost alot to replace. I am looking to get a ZF box version as I cant stomach the mc costs

Thanks pal , I'd definitely go back again , although I don't think I'd go in the winter .

Thanks , I just have too much to do at the moment, I'll be going to micklefield next time 👍

@diggs345lr I've still to got to mickles seen as I live in Middleton Leeds, usually end up at Doncaster or uncle Eddie's as my mate likes the enduro trail but the track its self is still good, hope you had a good day anyway buddy

@@DavesInHisGarage yes it was good to be out and back on the bike , never been to uncle eddies , maybe i should take the enduro bike there one day .l

Yeah your not kidding there , and it was a failure for what they wanted to do with it 😂

​@@chris-living-the-dream What were they even tryin to do? That stuff doesn't even look thick enough for the need of a thermal lance 😂

@@CokeLK he was testing it on the sheet piles which are 10mm , there are 2 x 2m pipes in the cofferdam they wanted to cut that are 20mm thick , it didn't go well so they gave up 🤔

www.ebay.co.uk/itm/154614529434?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=WapsIZ-PRYy&sssrc=2349624&ssuid=yrxlyZIKQgC&var=&widget_ver=artemis&media=COPY

I think it was £35 , groups are kids , novice and expert .

How are you liking it , iv only been out on mine twice due to rubbish weather and being busy .

@@chris-living-the-dreamI Love it…But I’m a 2 stroke guy,also I Still have to get my Suspension Dialed,then I need to get Used to the Power & Riding it,I Wish I could Show you Pictures of what I Changed , I got White Fork guards White Radiator Louvers, a Blue & White Disc Guard(Acerbis)a Blue Bar Pad & I Painted my Skid Plate Red…it IS Nice but Working on it is a Pain in the Ars -like Taking the Subframe off is a Nightmare ,Lots of Electrical stuff,I Haven’t Ridden it that much but Hopefully Will Soon,I put 6.8 hours on it So Far,I’m Waiting to get my FMF Mega Bomb Header Pipe,That is a Nightmare in itself as FMF Can’t get Materials to Build them,Thanks Joe Biden😡…Be Careful of the Stock Header !! My Flange piece was Bent a little & the Studs were Bent Also,I had to Replace them,make Sure if you Remove the Pipe,make Sure Not to Over Tighten them when you Install it ,anyway,Keep me informed on How Yours & how you Like it & any other Info you want to Share…Cheers👍🏁