Пікірлер
@journeytree Күн бұрын
The Honda dealership I took my car to refused to do this. My 2022 Honda Civic Lane Departure and LKAS system have been unstable since 2021. Far worse than the last generation Honda LKAS systems I have in other cars, it's actually not possible to use it safely in my car.
@saadali8422 6 күн бұрын
When and Why we Calibrate RAADAR???
@hudsonbrown6074 6 күн бұрын
I just had a new windshield installed and all the front sensors work fine. However, now the backup camera radar won't detect objects.The camera works fine but won't beep as objects approach. Is there any connection between the windshield and the rear bumper sensors? Can I fix this without that tablet?
@AutoEkektronic 7 күн бұрын
Good
@ericvando 14 күн бұрын
Your 5:30 step appears to be wrong. You need to get the center line position by pointing the laser from the back CL to the front CL and projecting to find the CL for your target and measure outward to get your 1000mm.
@adesinaloukouman6445 19 күн бұрын
good work sir more improvements
@pcguyc6961 Ай бұрын
Thank you for this very informative video. However, if I'm not mistaking, I saw that your speed was above 40 mph where was advised between 25 and 37 mph. In which way does this affect the end calibration result please? And, another question: is it also necessary to do a calibration with this Subaru after a windscreen change or only after a severe accident? Thanks for your kind reply and best regards
@walectube Ай бұрын
Shouldn’t the life be easier? Anyway, thanks
@simonngotho5058 Ай бұрын
What is the name diagnostic machine
@PopoPopo-fz6eg Ай бұрын
Hello bro .i need help..plz give me WhatsApp number..
@mikesomerville7748 Ай бұрын
What was the purpose of doing the wide angle calibration first? Was it required?
@roadguard5783 2 ай бұрын
Great video! I just finished recalibrating myself and although I don’t have that $210 recalibration image I do have a projector and a MacBook with a picture of the recalibration image lol worked like a charm 🙌🏾
@SnaponEquipment 2 ай бұрын
Not compliant with the OEM procedure.
@the_fleeing_dutchman 2 ай бұрын
Thank you, but how do you know if and when your ACC needs to be re-calibrated? Do you get a fault message somewhere?
@user-ib7no2jj2c 2 ай бұрын
So most windshield shops these days are charging around 500.00 for this service. I'm not sure how that is justified even with the accrued cost of the calibration equipment and liability insurance required to do this kind of work. A few years ago it was about 300.00 to calibrate which was tolerable. I blame subaru - I think it's safe to say most people who currently own optical based ADAS vehicles will steer clear of these models for their future purchases
@alvarotorres9057 4 ай бұрын
Thank you
@reymontero1928 4 ай бұрын
sir how the cost my 2022 rav4 pre collision malfunction problem
@apolo2967 4 ай бұрын
Whats the price to recalibrate on a 2020 jetta
@Onipaakoma 5 ай бұрын
Can I get your instagram account name
@OneTheSane 5 ай бұрын
We have such mixed results with the dynamic portion. Sometimes, it takes 15 minutes. It has also taken several hours
@sivaprasadkadancheryillam 5 ай бұрын
If i apply tint on Mazda logo,does it affects the radar???
@muzammilking7170 5 ай бұрын
What device did you use for that?
@alexkaban7860 5 ай бұрын
Why over complicating things? Who needs all that crap?
@Manuel-cj9tr 6 ай бұрын
what are the costs of adding wide angle camera to pre-facelift OUTBACK?
@stephenbay9564 6 ай бұрын
This is a great video. Thank you for it. One question - The pictures shown on the scan tool you used shows the reflector (antenna) with one of its points, pointing upward. However you have the antenna oriented such that the "top" of the antenna is flat. Does this orientation matter? The scan tool reported a successful calibration. I wonder if one also achieve a successful cal if the antenna was rotated as per what is shown on the scan tool? Would you know?
@SmartSafeTechUSA 6 ай бұрын
Good observation. The tablet's graphic of the trihedral corner reflector is shown in what is a "normal" position where the pointed side is facing up and the flat side is facing down. However, most OEM ADAS calibration equipment sets up the reflector with the flat side up and the pointed side down. Apologies for the confusion.
@andriikraversky7142 6 ай бұрын
will it work if the stand with squares is printed on plain paper?
@SmartSafeTechUSA 6 ай бұрын
Yes, in theory assuming that the ADAS target pattern is printed to precise specifications in terms of size and pattern contrast.
@andriikraversky7142 6 ай бұрын
дякую, чи буде працювати стенд з квадратами, якщо його просто роздрукувати в масштабі ?
@khag. 7 ай бұрын
This is cool! I just had my windshield replaced and i got to see a little bit of the calibration, but I didn't understand what the range finding panels on the wheels were all about. Now I get it. Pretty cool.
@DM-ud9tx 8 ай бұрын
That looks like an expensive procedure.
@elesanchez3292 9 ай бұрын
Great video
@junahmad392 9 ай бұрын
Unfortunately, the Adas programming device cannot access Jeep Dodge Chrysler cars and cannot pass SGW. I hope this problem will be addressed soon
@BrianHigashi-oc6ph 8 ай бұрын
For the US market, we are in the process of obtaining approval through Auto Auth. Once this process is completed, the tablet (software) will be able to get through the SGW.
@junahmad392 9 ай бұрын
Unfortunately, the Adas programming device cannot access Jeep Dodge Chrysler cars and cannot pass SGW. I hope this problem will be addressed soon
@cardo1111 9 ай бұрын
Well done. Thanks for sharing this
@MrRevto9k 10 ай бұрын
I thought these newer 2022+ civics have self calibrating camera
@SmartSafeTechUSA 6 ай бұрын
The current generation of Honda Civic multi-purpose camera (front) can be calibrated either by static or dynamic methods. Regardless, both methods are kicked off by the ADAS calibration feature of the diagnostic tool.
@indaydongtv5139 11 ай бұрын
Hi i have my 2023 trd rav4,i change my front grill to oem and after few days when i drove my car like after 1-2 hours my radar sensor doesnt work or pre collision system,my question is if i do the calibration it will fixed?thank you
@SmartSafeTechUSA 11 ай бұрын
Because of the R&R procedure, yes it may need to be re-calibrated. We recommend you take it an ADAS calibration qualified shop to confirm the ACC radar unit isn't damaged and re calibrate as needed.
@indaydongtv5139 11 ай бұрын
Thank you ❤️🙏
@franknwachi1425 11 ай бұрын
I leave in hayward California. Where is the best location i can go to have my calibration done
@ismailworkshop5000 11 ай бұрын
Excuse me where I can buy that scanner ?
@SmartSafeTechUSA 11 ай бұрын
Please email us at [email protected] and provide us with your contact information . Thank you.
@ismailworkshop5000 11 ай бұрын
Good job bro ❤
@SmartSafeTechUSA 11 ай бұрын
Thank you!
@hondamastersllc1913 11 ай бұрын
HOW TO ORDER IN THE US ???
@SmartSafeTechUSA 11 ай бұрын
Please email us at [email protected] and provide us with your contact information . Thank you.
@kennguyuen54 Жыл бұрын
I need to calibrate my car Hyundai 2019 where can I go I don't want to go to see dealers
@SmartSafeTechUSA 11 ай бұрын
Email us at [email protected] and provide us with your zip code. We can check and see if we have any ADAS calibration partners in your area. Thank you!
@yuriikrylasov2273 Жыл бұрын
Хорошая работа. А можно еще про настройку камеры при ее замене снять видео? Там нужно ее прописывать по регионам и типам авто.
@SmartSafeTechUSA 11 ай бұрын
Спасибо! Возможно, мы сможем сделать это в будущем, когда получим тестовый автомобиль, которому потребуется замена камеры. Пока что большинство из них являются просто калибровкой, поэтому перепрограммирование не требуется.
@Whutup549 Жыл бұрын
Can you dynamics in cities with snow?
@SmartSafeTechUSA 11 ай бұрын
It would be difficult to calibrate in dynamic mode when conditions are not optimal.
@Whutup549 Жыл бұрын
Can you do the dynamic while in cruise control
@SmartSafeTechUSA 11 ай бұрын
Performing dynamic Advanced Driver Assistance Systems (ADAS) calibration with cruise control engaged is generally not recommended.
@zetnaj3328 Жыл бұрын
Como se llama el equipo de calibración?
@SmartSafeTechUSA 11 ай бұрын
Esta es una calibración de detección de punto ciego trasero (radar). Puede utilizar nuestra tableta iSmartlink801 con nuestro marco de calibración de radar 3 en 1. Enlace al sitio web que se proporciona a continuación. newsmartsafe.com/auto-scanner/diagnostic-tools-in-automotive newsmartsafe.com/adas-calibration-tools/passenger-vehicle-adas-radar-calibration-toolkit If you are interested in purchasing, you can contact us at: [email protected] Thank you.
@rossbi1131 Жыл бұрын
Really helpful, thank you Brain!
@SmartSafeTechUSA 11 ай бұрын
Happy to help!
@williamgarcia3256 Жыл бұрын
Where are yoou located? Need my car scanned since my LKAS and ACC is throwing faults and I dont want to go to the stealership
@SmartSafeTechUSA 11 ай бұрын
Unfortunately we are the manufacturer of the calibration equipment and do not perform customer ADAS scans. You can email us at [email protected] and provide us with your zip code and we can see if we have an ADAS calibration partner in your area. Thank you!
@StevenUvalle Жыл бұрын
Nice !! I worked for an afas company before !! Good times !
@SmartSafeTechUSA 11 ай бұрын
Very cool!
@blvckoutprty Жыл бұрын
Better question, I purchased a aftermarket mirror. Will i still be able to calibrate?
@SmartSafeTechUSA Жыл бұрын
Assuming that the aftermarket mirror (assembly?) is still using the OE lane watch camera, my guess is it should work unless for some reason the aftermarket mirror does not hold the camera in the same manner as an OE unit.
@blvckoutprty Жыл бұрын
I replaced the mirror and the camera is facing up. What is the best solution to this issue?
@SmartSafeTechUSA 11 ай бұрын
Recommend having the Lane Watch camera calibrated.
@bebss22 Жыл бұрын
It's helpful thanks
@SmartSafeTechUSA Жыл бұрын
Glad it helped!
@russlane3040 Жыл бұрын
What would indicate the need for this procedure?
@SmartSafeTechUSA Жыл бұрын
Calibration of BSD is needed if for example the vehicle was involved in a rear end accident whereby damage to the BSD radar sensor or mounts occur. The radar unit would either need to be replaced and/or its mounts and that would necessitate the need for calibration.