I have nearly identical model PP11G30 and need to do this. But...I find this mower cuts terrible. I have blade raised all the way up (via threads) and it still cuts too low.
@markeviota27 күн бұрын
Maybe you need a mower deck support to prevent it from cutting too low? Like this one here - amzn.to/4flgufF
@sS-fs8pn27 күн бұрын
@ never thought of this, thanks. I’ll check it out.
@markeviota27 күн бұрын
@@sS-fs8pn You are welcome! :)
@sxewhodeyАй бұрын
Do you have a lot of sloppiness in your steering? Trying to determine what to do about tightening it up? Subscribed
@markeviotaАй бұрын
Hi sxewhodey, thank you for subscribing! Yes, it’s a bit sloppy when I turn, but it’s been like that since I bought it. Try tightening any loose steering bolts and greasing the joints. I have video here where to grease kzbin.info/www/bejne/b5-vmIqFd85poZYsi=2aiCBz2w7zbStLKs
@RobinEdwards-cr2mj4 ай бұрын
I have the same dang mower and need to replace starter solenoid...Any video on that?
@markeviota4 ай бұрын
hi Robin. Not yet. Mine still good.
@shakephear4 ай бұрын
Very helpful for diy tasks
@kurthimmen45786 ай бұрын
Perfect, thank you!
@markeviota3 ай бұрын
You're welcome!
@perillouss35066 ай бұрын
Got it! Thanks.
@markeviota3 ай бұрын
Welcome!
@geoffsullivan40637 ай бұрын
Grim..
@BarbaraBishop-kp8xv7 ай бұрын
Thanks Mark for the timely video. I could have saved 25 minutes if I had loosened those 4 bolts first. great helpful video. I wont go into the quality of the poulan PB301.
@markeviota3 ай бұрын
Glad it helped
@BaltazarGuerrero-ut2uo8 ай бұрын
What size is the belt
@markeviota8 ай бұрын
Belt size needs to be 1/2" x 70" for Poulan Pro PB301. You can buy it from this link here amzn.to/3UwMg15
@shirleylewis13665 ай бұрын
@@markeviota would that size fit propane pro pp175G42 ?
@markeviota5 ай бұрын
@@shirleylewis1366 Hi Shirley. No, the 1/2" by 70" deck belt will not fit in your PP175G42. You will need the 1/2" by 101" belt. You can buy it from here: amzn.to/3WJrY5x or here is another brand amzn.to/3SRN00D
@sarahbarrick3139 Жыл бұрын
How do I create an anchor that takes me from a bullet list on one page to a paragraph title on a separate page
@markeviota Жыл бұрын
You can create like the sample I have below: <!-- Page1.html --> <ul> <li>Item 1</li> <li>Item 2</li> <li><a id="targetParagraph" href="path/to/Page2.html#targetParagraph">Go to Target Paragraph</a></li> </ul> Then on the separate page, you insert the id just like showing below. You can insert it inside the h2, p, div, etc. <!-- Page2.html --> <h2 id="targetParagraph">Target Paragraph Title</h2> <p>This is the paragraph you want to link to.</p>
@joekrim6557 Жыл бұрын
what is your point?
@manuelmartinez2722 Жыл бұрын
How much oil do you exactly put in it ?
@yuvrajgavali8670 Жыл бұрын
problem ka solution chaiye tha method change nahi
@jeremybunkley8506 Жыл бұрын
Hi Mark! Awesome videos and thank you for sharing! I was looking to put power steering on this mower as I just bought it about 2 months ago and was hoping you could point me in the direction of a video where I might be able to find those steps. Thank you and keep making great content brother!
@donwenger2616 Жыл бұрын
That's a lawnmower, not a tractor.
@markeviota Жыл бұрын
Thank you for letting me know Don
@lucky-one Жыл бұрын
Hi, thanks for your help ^^ We would like to do the same with a video. Can you help us ? At tis moment we use layerslider to show our video on home page but would be great to find a better way to improve pagespeed. Thanks in advance in case you can help
@markeviota Жыл бұрын
The layerslider is heavier than the Avada Slider. If you want faster page speed you can use the Avada Slider because it is lighter and use/upload the video in youtube or vimeo. Don't self host your video in your server if you have a long video. The layerslider is a very nice slider because it is more mobile friendly, way better than Avada Slider, but heavier. It also has templates that you can modify.
@jhid72842 жыл бұрын
Do you know how to repair a clicking/slipping steering wheel on this model
@markeviota2 жыл бұрын
It sounds like something is loose. I recommend removing the plastic covering of the steering and trace where the clicking / slipping is coming from. I have the manuals here at the bottom of the page so you can use it as a guide and look at the disassembly drawings. This is the link: markeviota.com/poulan-pro-pb301-tractor
@Chadddyp2 жыл бұрын
CAN I RENAME WHERE IT SAYS "CHOOSE AN OPTION" ?
@markeviota2 жыл бұрын
Yes, you can. You will have to edit the WooCommerce plugin PHP source code.
@grf83212 жыл бұрын
Does it mowe in reverse?
@markeviota2 жыл бұрын
Yes
@mikesecor60742 жыл бұрын
the music is annoying too, lol.
@mikesecor60742 жыл бұрын
too fast, you have to slow down. especially taking it out of the crate.
@BradySzabo2 жыл бұрын
I am trying to watch the video but the screen is all blurry and I can't read anything. What resolution is the screen recording software? Thanks for the video.
@markhoeks46203 жыл бұрын
Thanks my friend, i was struggling the hole day with removing this ugly feature
@tomasgonzalez2433 жыл бұрын
I have a tractor the same. I already did the tune-up. Turns on but when I remove the brake it turns off, even while in Neutral
@markeviota3 жыл бұрын
Check the parking break lever. Sounds like wiring issue.
@markeviota3 жыл бұрын
Also check your seat wiring connections. This tractor stops the engine when you get off the seat for safety reasons. Maybe you need to check the auto shut off seat safety switch. Something probably happened there.
@huntercockerline72583 жыл бұрын
hey Mark can you please do a video showing the mower deck. I just did the spindle but took a few weeks to come in and I can't figure out how it is supposed to go
@Trucks102 жыл бұрын
UFxutxoyxitxydzyrz
@Trucks102 жыл бұрын
UFxutxoyxitxydzyrz
@stevengrant6603 Жыл бұрын
Thanks for the video. Any advice on the wheel bearings? Or do you replace rim?
@JamesJones-jc7cx3 жыл бұрын
Damn this jus happened to me and am so nervous..
@markeviota3 жыл бұрын
Goodluck my friend. You can do it! 🙏
@ministrychicago13 жыл бұрын
How much oil did you put in it. I read around 21 ounces from different site.
@markeviota3 жыл бұрын
I just keep checking the dipstick. I add more until it reaches the full level line in the dipstick. If I go over, I drain it a little and check it again. I recommend add bit by bit so you wont go over and keep checking the dipstick.
@ministrychicago13 жыл бұрын
They say the Poulan Peo PB301 has an oil capacity of 48 oz.
@gutosguissardi3 жыл бұрын
this will not work if the visitor's monitor is wider than 1920px
@markeviota Жыл бұрын
Use higher dimensions images higher than 1920px or what ever the resolution of the monitor you are targeting can display.
@andreawoodard69023 жыл бұрын
Thank you mark this really helped me. As a woman, it is hard to get help without being cheated or overcharged. This really helped me get my tractor up and running for the grass-cutting season.
@EdLearningWorld4 жыл бұрын
Oh man... I looked for an hour! It was so simple!
@SayCheese19814 жыл бұрын
Thank you for this. I needed to do this but from a button. Watched your video, then read about doing it from a button in the comments and it's worked. Took me far too long to figure out how to do it and then I found this vid. Thanks.
@jzs52854 жыл бұрын
the image carousel keeps on showing title AND category (metadata ?) how to keep it to display only title below?
@markeviota4 жыл бұрын
JZ S what version is your avada?
@jzs52854 жыл бұрын
Mark Eviota version 6 or 6.2 i think
@federicoalonso39414 жыл бұрын
Thank you!
@markeviota4 жыл бұрын
Federico Alonso thank you for watching 😊
@daienter4 жыл бұрын
thank you! :)
@markeviota4 жыл бұрын
You are welcome 😊 thank you for watching
@mariop54774 жыл бұрын
Where can I get a replacement carburetor for that model?
@markeviota4 жыл бұрын
Hi Mario, try it on www.partswarehouse.com
@cornfusedatbest66934 жыл бұрын
I can't say's fer sure, but I'm bettin SURGEONS don't take the time and effort in the operating room. Great video.
@markeviota4 жыл бұрын
Cornfused Atbest thank you! 😁
@cornfusedatbest66934 жыл бұрын
@@markeviota I gotta call it as I see it, no matter what the circumstance.
@juanavalos2474 жыл бұрын
Can you please give me the battery model number or type?
@markeviota4 жыл бұрын
I have the complete doc here at markeviota.com/poulan-pro-pb301-tractor I replaced my battery with Super Start brand. Part number ETZ7S and works without issues.
@anything70874 жыл бұрын
Ram type what is
@ImperfectPerfections_MonVee4 жыл бұрын
Do you know the belt size on this mower?
@markeviota4 жыл бұрын
Hi Kamela. It is 70 in by 1/2 in.
@simonsaad72114 жыл бұрын
how i can sort all pic in one step by the name
@markeviota4 жыл бұрын
Hi simon. Unfortunately, you can't do it on the image carousel. You have to manually sort it.
@davidskero4 жыл бұрын
Yeah I'm having some trouble with mine. I haven't taken care of it as well as yours, going to try to replace the spark plug this weekend, I think I need to replace the carburetor too. I replaced the battery, it starts up but once i start cutting it dies out. Hopefully the new spark plug will help. Thanks for sharing this video!
@markeviota4 жыл бұрын
You are welcome iamskero. Did you winterize your riding mower? I think you have a bad fuel in your engine. Fuel mixed with water. Or maybe a very dirty filter. Try replacing or clean your filter also when your are done replacing your spark plug. Also buy a fuel stabilizer here goo.gl/p6BPF5 . I have a video how to add fuel stabilizer here kzbin.info/www/bejne/pauQZaSljdinmKc the fuel stabilizer will help remove moisture inside your engine or remove the water mixed with your fuel.
@rosadominic52364 жыл бұрын
Sir, I have a tractor that is the same, but it has a problem. The belt breaks. I don't know if it hasn't happened to you.
@markeviota4 жыл бұрын
Hi Rosa. It didn't happen to me. I think you need to buy a new high quality belt. You can access the manual here to give you an idea how to install the belt. This is the link www.manualslib.com/products/Poulan-Pro-Pb301-3780985.html
@MarrakechRiadDarZaman4 жыл бұрын
Great video, Mark, was exactly what I was looking for :-)
@markeviota4 жыл бұрын
Marrakech Riad Dar Zaman Thank you!
@BrianMofoingEricson4 жыл бұрын
The beat drop when the screw came out had me rolling hahaha. Great job sir, about to extract my first on an N54 valve cover.
@markeviota4 жыл бұрын
Brian Ericson hahahahahaha. Good luck to you Brian. Take your time, take a break and have patience!
@zacharyjohnson44754 жыл бұрын
Hey yes im trying to change the oil and the wrench you used didn't work for me sooo...
@patjesscole27094 жыл бұрын
When applying it to Spark Plugs use it sparingly and only apply to the middle threads of the plug. Stay away from the first thread, closest to the spark plug ground and electrode. You do not want any anti-seize on the ground or electrode, ever! Do not apply a lot.  agradetools.com › be-confide... Anti Seize On Spark Plugs? Dangerous or Good Practice ...
@patjesscole27094 жыл бұрын
I was wondering why you put anti seize on the diode of the spark plug i know not to use it on threads in aluminum heads but ive never seen it put on the diode?
@markeviota4 жыл бұрын
Shout out to my friend Freddy Boy Iorio for sending me the Raspberry Pi 4 gift!!! This thing is freakin magical! 😆 thank you so much Brod!
@busyb41014 жыл бұрын
Putting a case on the raspberry pi*
@markeviota4 жыл бұрын
LoL 😂 Come on man! U messed up my strategy.
@mtbpilipinas49234 жыл бұрын
what's the mask? where to buy it? Please give me step by step instruction
@markeviota4 жыл бұрын
Hi MTB Pilipinas. The mask with face shield is out of stock. I can't find it anymore. I bought it on ebay(Pyramex Capstone Combination Goggles and Face Shield). You can still use any mask. You just need these 25mm small 5v fans that you can buy it here at ebay.to/3c6gjot Watch the video again how I connect the wirings. You need usb cables from old usb chargers and splice it. Connect only the black and red together.