Loaderkit

Пікірлер

@HueyPPLong 6 ай бұрын

How many Horse is the engine

@loaderkit2762 6 ай бұрын

15hp

@abdullahdurdu1612 6 ай бұрын

Çok başarılı

@ltaylor4444 8 ай бұрын

What size engine fits in this?

@mundhiral-kiyumi8300 9 ай бұрын

I’m about to buy the plans but why did you use tires? Are they better than tracks ? Can you change the design to add tracks I will pay more for the plan

@loaderkit2762 9 ай бұрын

Hello. I couldn't find an e-shop where I could buy tracks and parts needed for construction. I wouldn't change the drawing without building it myself. I did it with wheels because it's easy and cheap. I would think about it if there was an e-shop where you could see prices and get pieces.

@RadzioWorkShop 10 ай бұрын

Mam pytanie, czy łańcuch i zębatki są jakoś zabezpieczone przed uszkodzeniem od dołu ?

@loaderkit2762 10 ай бұрын

nie jest chroniony. Zaprojektowanie rozsądnego zabezpieczenia jest trudne, zajmuje też miejsce, a jeśli wykonamy zabezpieczenie zamknięte, istnieje ryzyko, że wewnątrz zabezpieczenia zacznie gromadzić się brud od góry. Zdecydowałem się po prostu założyć masywniejszy łańcuch, na chwilę obecną wydaje się, że ten łańcuch wytrzyma tam 100 lat, a jeśli się zepsuje, łatwo go wymienić.

@RadzioWorkShop 10 ай бұрын

Okej, masz wsumie racje, a masz może dodatkowy projekt/pomysł jak do tej łyżki dorobić krokodyla do obornika ?

@loaderkit2762 10 ай бұрын

Tłumacz Google daje ciekawą odpowiedź na Twoje pytanie, naprawdę chcesz wrzucić krokodyla do wiadra pełnego błota. Tak czy inaczej, następnie chciałbym wykonać wiertarkę za pomocą prostych narzędzi, mam pomysł.@@RadzioWorkShop

@loaderkit2762 10 ай бұрын

Niestety, Tłumacz Google nie może normalnie przetłumaczyć Twojego pytania, spróbuj zmienić jego sformułowanie.

@loaderkit2762 10 ай бұрын

Niestety, Tłumacz Google nie może normalnie przetłumaczyć Twojego pytania, spróbuj zmienić jego sformułowanie.

@Hydrolidereu Жыл бұрын

Congratulations on your talent and skills. We wish you a long service life. Hydrolider Team

@Niklez7 Жыл бұрын

where did you buy the hydraulic pump,engine,gears ? would also be interesting the total cost of building one? i did consider buying it from China but its very unknown quality of pumps,material,engine, and so on.

@loaderkit2762 Жыл бұрын

I made a project on etsy.com LOADERKIT . I mostly bought the components in Poland, but you can also find them on ebay, I made an excel table with places of purchase and prices. I dare not use Chinese components. However, the total price under 5000 euros depends on which components to use.

@peteredelhofer6852 Жыл бұрын

Tolle Schweissnähte 😂

@jesserobertson9773 Жыл бұрын

Im interested in one for digging fence posts

@oscarroberto7926 Жыл бұрын

Hi we're buy they plans tnkz

@loaderkit2762 Жыл бұрын

www.etsy.com/listing/1418131148/skid-steer-plans?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=loaderkit&ref=sr_gallery-1-1&organic_search_click=1

@martijnjonkers2179 Жыл бұрын

Dude props to you,that is a great machine you have build. Nothing beats self build🤜🏻

@davex5456 2 жыл бұрын

Nice!

@OneManOperation 2 жыл бұрын

Jumala äge masin 👌

@rolfnilsen6385 2 жыл бұрын

You really should post some more videos. You do some seriously neat stuff.

@coburnlowman 2 жыл бұрын

When do you think you will have a new video of this up ??? I could send a small amount of$$$ to help. I'm not asking for it free. Not sure how to do it tho. I don't have a lot to freely give , but I know it's costing you to do this.

@loaderkit2762 2 жыл бұрын

To build a metal frame from old scrap is not worth it. too much work and later you discover that one place is not moving properly and another is not holding up. The strokes and dimensions of the cylinders must match the frame also . that's why i made laser cut metal. factory loaders are often built so that they cannot be repaired in the end . Mine is built from parts bought from regular stores, except for the frame so you can keep it alive for a very long time and it's not expensive. The new loader 3D model is ready, currently waiting for the price and delivery time of the steel frame to start making video. you can send some pictures of your loader, maybe i can give advice . [email protected]

@coburnlowman 2 жыл бұрын

I have subscribed. I have a worn out skid steer. It breaks every time I try to use it. Can't afford a new one , but have plenty of scrap steel lying around. Would love to build a new one with new pumps , hoses , engine. Mine is over 60 years old and everything breaks on it. From linkage to bearings. Not counting hoses.

@maxdistortion9501 2 жыл бұрын

Hey! How much does it cost you to build this skid stear?

@loaderkit2762 2 жыл бұрын

im making new model , approximate price 7000k eur or 7500 dollar but there is nothing sure , the price of steel has tripled.

@johnslesinger7109 2 жыл бұрын

Death Trap

@markmonson7405 2 жыл бұрын

I want to build 1 do u have plans ?

@loaderkit2762 2 жыл бұрын

im tellin honest , you have nothing to do with the drawings , too many errors.

@runevestermark1927 3 жыл бұрын

Excellent loader!!!👍

@StanwoodStudios 3 жыл бұрын

Nicely done!

@jtsfarmengines6633 3 жыл бұрын

I’d build a cage around the engine to not only protect it from backing into things, but the extra weight would act as a counter balance so it’s not as tipsy when lifting a bucket full of sand or such.

@kylejcool 3 жыл бұрын

I want one! I wonder what an estimate would be .... like $1k ?

@loaderkit2762 2 жыл бұрын

im making new model , approximate price 7000k eur or 7500 dollar but there is nothing sure , the price of steel has tripled.

@theozarkhillbilly9040 3 жыл бұрын

handy

@hrsuluu1936 3 жыл бұрын

Kuidas sa seda ehitasid kas on sul mingi video ka voi

@loaderkit2762 3 жыл бұрын

Selle ehitusest videot pole, kole video oleks olnud . On plaanis alustada uuega ja sellest juba video ka.

@PolishFabricator 3 жыл бұрын

Hi. What hydraulic motor did you use?

@loaderkit2762 3 жыл бұрын

sms type

@PolishFabricator 3 жыл бұрын

@@loaderkit2762 ok! Thanks but how much cm3?

@loaderkit2762 3 жыл бұрын

@@PolishFabricator 200

@BigStuism 5 жыл бұрын

Nice little machine man! 😊😊👍👍

@MGszamanVlog 5 жыл бұрын

Hi, can I use part of your video to my compilation homemade inventions and projects ?

@loaderkit2762 5 жыл бұрын

yes you can .

@MGszamanVlog 5 жыл бұрын

@@loaderkit2762 Thank You

@Xan2k 5 жыл бұрын

Have to make me one of these.

@rolfnilsen6385 5 жыл бұрын

That was a nice and simple wood processor! You have implemented feeding of the wood which makes it less physical to use the machine for a whole day, but why no offloading of finished firewood? A feeding band or similar could perhaps also be driven by the hydraulic sylinder? Did you develop your machine further? It would be cool with a fresh video.