MA35D1 Design Resource Navigation
5:04
Пікірлер
@guitargamery777
@guitargamery777 Ай бұрын
showing temps out of control in my motherboard Asus tuf z790 plus (i713700k) , core #5 (total of 6 cores) has temps that are not right 80-120 degrees Celsius , isnt the CPU cores, the CPU 8 cores temps are shown on a lower section of the monitor software that i use and they look good and right, but these Nuvoton Temperatures shown on the top core#1, core#2...Core#6 , are jumping around crazy one of the cores shows 5degrees but core#5 shows between 70-120 degrees, cant be right since the computer have a lot of air flow in a cold environment, must be erroneous reading i guess, i have been searching for this problem and many people have the same problem. These last 2 years the tech Industry like Intel , Asus, Nvidia, AMD they have been all over the place with very bad practices ... Gpu´s dying , Cpu´s melting down due high temps its been crazy, I have never seen this trend in 25 years of assembling my own computers, finally i found the channel of Nuvoton, so...Nuvoton is the chip who controls and reads of the fans speeds the temperatures of the motherboard, right? what are those 6cores? isnt the CPU cores because like i said my cpu has 8 cores and 24 threats, plz someone teach me what those 6 cores are, would be nice.
@華格-x3i
@華格-x3i Ай бұрын
請問有OPC UA Server跟Client嗎?
@QuipJoy-sx7ii
@QuipJoy-sx7ii 2 ай бұрын
I want to make a encoder and decoder like ht12e and ht12d Please share a guide video
@NuMicro
@NuMicro 2 ай бұрын
We don’t have any example code for HT12E and HT12D and only support one example code for NEC IR. Please refer below website and This will help you to understand how to use PWM and capture functionality. forum.nuvoton.com/viewtopic.php?t=8217 If you have any ideas, please contact us. www.nuvoton.com/support/technical-support/form/ we can assist you further, thank you.
@easyembeddedsoftware
@easyembeddedsoftware 3 ай бұрын
@sunnykhatri2808
@sunnykhatri2808 4 ай бұрын
price ..?
@NuMicro
@NuMicro 4 ай бұрын
You can refer to our online mall: direct.nuvoton.com/tw/numaker-hmi-ma35h0-a1?search_query=MA35H0&results=1 or send us an email to inquire, thank you. [email protected]
@WayneCarlBarker
@WayneCarlBarker 5 ай бұрын
Can this be used to program the LCD Screen? I want to have text scroll from right to left on a 16x2 LCD screen.
@NuMicro
@NuMicro 4 ай бұрын
This tool is used for simulating effects. Once the text scroll application programming is completed, and download to the target board, it can be displayed on the PC first. For any further technical inquiries, please contact [email protected], thanks.
@easyembeddedsoftware
@easyembeddedsoftware 5 ай бұрын
Great
@ExplainingMathematics
@ExplainingMathematics 5 ай бұрын
This is amazing, are you able evaluate little more in depth walk through.. thanks
@NuMicro
@NuMicro 5 ай бұрын
Please follow Nuvoton's upcoming activities or fill out the form at www.nuvoton.com/ai/contact-us/ to let Nuvoton understand your needs.
@katyyho
@katyyho 6 ай бұрын
Amazing investor-male-lead-talent casted model!
@easyembeddedsoftware
@easyembeddedsoftware 7 ай бұрын
please share ebike all image to include in our appwizard tool
@NuMicro
@NuMicro 7 ай бұрын
Please visit the link below to access and download the Example Code for this sample. It contains source code, all images, and an AppWizard project. forum.nuvoton.com/viewtopic.php?f=19&t=11186&sid=1f4715f5205c1fb45b47aa8ad301cf2c
@Emtron_Technologies
@Emtron_Technologies 7 ай бұрын
Nuvoton brings innovative ideas.
@axramar1992
@axramar1992 7 ай бұрын
😍
@easyembeddedsoftware
@easyembeddedsoftware 8 ай бұрын
Great keep it up
@우광식-j9g
@우광식-j9g 8 ай бұрын
How do I know if gpio B8 is 40?
@NuMicro
@NuMicro 8 ай бұрын
Please refer the GPIO part of Linux Driver Configuration at page 24 of “NUC980 Linux BSP v4.4 User Manual” or page 18 of “NUC980 Linux BSP v5.10 User Manual”. “Driver will keep 32 numbers for each group of GPIO from port A to port J. So the number for the GPIOA will be 0x000~0x01F, GPIOB will be 0x020~0x03F, GPIOC will be 0x040~0x05F, GPIOD will be 0x060~0x07F, GPIOE will be 0x080~0x09F, GPIOF will be 0x0A0~0x0BF, GPIOG will be 0x0C0~0x0DF, GPIOH will be 0x0E0~0x0FF, GPIOI will be 0x100~0x11F and GPIOJ will be 0x120~0x13F” So B8 is 0x28, which is 40 decimal.
@PRASADTENNAKOON-u7y
@PRASADTENNAKOON-u7y 9 ай бұрын
Hello ! I seen Nuvoton ISD 9160 SoC using Microsoft for their Limited Editions consoles Power Front Board. its have special sound effects rather than normal ON/OFF, Disc Eject sound. I was never seen this SoC in Normal Xbox One Consoles. So, Is this Microcontroller Using for save sound clip or communication with main motherboard ?
@NuMicro
@NuMicro 9 ай бұрын
ISD9160 is Audio MCU, can be master or slave, can playback sound from SPI Flash or I2S. What is your product function or required spec? If you have more questions, please contact [email protected] Thank you.
@PRASADTENNAKOON-u7y
@PRASADTENNAKOON-u7y 9 ай бұрын
Thanks for reply @@NuMicro
@PRASADTENNAKOON-u7y
@PRASADTENNAKOON-u7y 9 ай бұрын
Hello ! I seen Nuvoton ISD 9160 SoC using Microsoft for their Limited Editions consoles Power Front Board. its have special sound effects rather than normal ON/OFF, Disc Eject sound. I was never seen this SoC in Normal Xbox One Consoles. So, Is this Microcontroller Using for save sound clip or communication with main motherboard ?
@NuMicro
@NuMicro 9 ай бұрын
ISD9160 is Audio MCU, can be master or slave, can playback sound from SPI Flash or I2S. What is your product function or required spec? If you have more questions, please contact [email protected] Thank you.
@PRASADTENNAKOON-u7y
@PRASADTENNAKOON-u7y 9 ай бұрын
Thanks for reply @@NuMicro
@nafkt
@nafkt 10 ай бұрын
Hi there, do you have the latest video? I'm looking for Keil MDK for Cortex M0. My chip number is NUC131LD2AE and I don't have a PSN number. Thanks in advance.
@NuMicro
@NuMicro 9 ай бұрын
Please fill out the form on our website (www.nuvoton.com/tool-and-software/ide-and-compiler/get-keil-mdk-lic/ ). After submission, you will receive an email with the LIC code attached. And then enter the LIC code into Keil License Management.
@followthewhiterabbit7559
@followthewhiterabbit7559 10 ай бұрын
Hello, is there any linux support for the ide ?
@NuMicro
@NuMicro 10 ай бұрын
Mbed OS has provided off-line tools Mbed Studio and CLI (Command Line Interface). Both has supported Linux environment. Please refer the Linux part of tool installation document os.mbed.com/docs/mbed-studio/current/getting-started/index.html for Mbed Studio and os.mbed.com/docs/mbed-os/latest/quick-start/build-with-mbed-cli.html for CLI.
@easyembeddedsoftware
@easyembeddedsoftware 11 ай бұрын
Great keep it up
@NuMicro
@NuMicro 10 ай бұрын
Thank you for your support and encouragement, we will continue to work hard.
@pivnev_PSOC
@pivnev_PSOC 11 ай бұрын
В BSP отсутствует функция чтения состояния вывода GPIO. У STM32 есть вот эта функция GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef * GPIOx, uint16_t GPIO_Pin). Приходится использовать конструкцию на регистрах u8 Port_Bit[] = {1UL, 2UL, 4UL, 8UL}; for (u8 x = 0; x <= 3; x++) { if ((PA->PIN & Port_Bit[x])== 0x0){.... }}, второй вариант if(PA1 == 0x0){}.
@btstoxikosmos
@btstoxikosmos Жыл бұрын
Providing tutorial regarding my quiry plz
@NuMicro
@NuMicro 10 ай бұрын
what kind of inquiry you need?
@btstoxikosmos
@btstoxikosmos 10 ай бұрын
@@NuMicro I purchased MS51FB9AE I want learn programing using keil software plz learn how to do program
@NuMicro
@NuMicro 10 ай бұрын
@@btstoxikosmos www.nuvoton.com/board/nutiny-ms51fb/?index=2 You could find the resource in this quick start page, thank you.
@btstoxikosmos
@btstoxikosmos Жыл бұрын
I purchased NuMicro. Family 8051 Nu Tiny Board but i have not knowledge about how to keil software and setups Nutiny-MS51FB and i am from india 🇮🇳 plz help me to increase my knowledge i want to make more project based on this ic
@MedaBoard
@MedaBoard Жыл бұрын
You should upload more videos 🎉
@EmbSysDev
@EmbSysDev Жыл бұрын
I concur.
@NuMicro
@NuMicro 10 ай бұрын
We will continue to work hard, thank you for the suggestion.
@megabee4842
@megabee4842 Жыл бұрын
I would appreciate it if you could turn on the subtitle feature in the application videos.
@NigelTolley
@NigelTolley Жыл бұрын
I bought a handful of these for a project, thinking the ultralow power and wide voltage were ideal. But the learning curve to get this to work is very near vertical. Could we not get a link to the Arduino programming environment or something? The physical footprint is compatible, but the software? Not so much...
@NuMicro
@NuMicro Жыл бұрын
All of nuvoton Arduino information can be found from below nuvoton github link. github.com/OpenNuvoton/NuMaker_UNO By the way, we still suggest using BSP driver to implement low-power operation flow. If possible, please also study BSP sample code. github.com/OpenNuvoton github.com/OpenNuvoton/M251BSP/tree/master/SampleCode/PowerManagement If you have any question, please email: [email protected] and we can assist you further.
@zorzional
@zorzional Жыл бұрын
Hello, I am using numaker M258KE and nulinkpro for the debug. But I am not able to show the print out message on the serial monitor. Could you please help?
@NuMicro
@NuMicro Жыл бұрын
If using the on-board debugger - Nu-Link2-Me, there is a virtual com port to control the printed message. If using Nu-Link-Pro, please confirm the UART configuration and related settings on the serial monitor tool. If you have more questions, please contact [email protected]
@zorzional
@zorzional Жыл бұрын
Is it possible you to give the link for API's you mentioned in the video?
@NuMicro
@NuMicro Жыл бұрын
You can go to the following path to see the timer.c file M031_Series_BSP_CMSIS_V3.05.000\Library\StdDriver\src\timer.c Or refer to the following URL github.com/OpenNuvoton/M031BSP/blob/master/Library/StdDriver/src/timer.c If you have any questions, you can also contact us [email protected] and we can assist you further.
@handle-th
@handle-th Жыл бұрын
Good day! What programmer is used for burning ms51 line?
@NuMicro
@NuMicro Жыл бұрын
Nuvoton provides a variety of Debugger and Programmer (Nu-Link Debug Adapter) for Nuvoton NuMicro series microcontrollers, including MS51 series. The differences between the Nu-Link Debug Adapter are listed in the link below. www.nuvoton.com/tool-and-software/debugger-and-programmer/index.html If you have any question, please email: [email protected] and we can assist you further, thank you.
@bettymalone3769
@bettymalone3769 Жыл бұрын
*Promosm*
@amitchaudhary6
@amitchaudhary6 Жыл бұрын
Hi Team Nuvoton, I am working on a project where I need to connect MS51FB9AE MCU with nRF24L01 RF module. Can you help me with the library or some tutorial which may help.
@NuMicro
@NuMicro Жыл бұрын
Thanks for contacting us. You can refer to the example code, Drive NRF24L01P Module via SPI, for other series rather than MS51 series first. Find the example code here: www.nuvoton.com/resource-download.jsp?tp_GUID=EC0120191209142353 We will upload the example code of MS51 series later.
@arnoldstoll-rf6rk
@arnoldstoll-rf6rk Жыл бұрын
8
@bobby9568
@bobby9568 Жыл бұрын
can you show more detailed coding in your videos?
@NuMicro
@NuMicro Жыл бұрын
Thank you for your feedback. In the future, we will provide explanatory documents and videos. If you'd like to stay updated with our latest videos, please subscribe and follow us.
@ExplainingMathematics
@ExplainingMathematics Жыл бұрын
Good work.
@kadirsrht6011
@kadirsrht6011 Жыл бұрын
Please shoot this video in N9H20
@NuMicro
@NuMicro Жыл бұрын
Yes, we are planning another emWin AppWizard tutorial video on N9H20 platform. Thanks
@ExplainingMathematics
@ExplainingMathematics Жыл бұрын
This will be an asset to my upcoming project, soon i will be touch. Tanks for sharing.
@NuMicro
@NuMicro Жыл бұрын
Thank you for liking this video.
@nfcradio4622
@nfcradio4622 Жыл бұрын
Not interested in your bsp give asm code and pl provide float Arithmetic asm code we write code in asm also give support fro half float in asm. Keil is useless asm code give code optimisation and speed also C genrate heavy and bulky code.
@NuMicro
@NuMicro Жыл бұрын
Sorry, we do not currently offer asm example code. Thank you for your feedback. I'll pass on your suggestions to the relevant department.