RebuildingMatt247

Пікірлер

@SteveCosby-j3i 9 күн бұрын

I share your frustrarions bro. Thank you for sharing your thoughts and experience.

@rebuildingmatt247 9 күн бұрын

Thanks man!

@Ridesnratchets 6 ай бұрын

The company where you got the mids from, do they make some for ironhead sportsters as well?

@rebuildingmatt247 Ай бұрын

Tbh honest man I’m not sure I think some companies sell regular mid controls for iron heads ..look up main drive on instagram or lnsplitblvd I think he started making his own high mid pegs on instagram as well see if he can adjust em for the ironhead

@dbdevkc Жыл бұрын

Those are some awesome looking mids. Maybe a bit too high for me but I love that stance. I've been looking for something like that - that can be used with a closed (and sealed/isolated) primary and my foot clutch. Those are the only one's I've seen that would work. Just not sure with them being that high. I get it though, to work with a closed primary and be lower, the support bar would need to bend back down after clearing the top of the primary, and the pegs would be sticking out way far.

@rebuildingmatt247 Жыл бұрын

Yeah the mids are definitely “high mids” I’ve ridden the bike here and there recently and personally I can handle them being this high but I understand most wouldn’t ,your hips could easily cramp depending on your flexibility lol…but they make other kits I believe you can buy where the mid controls go inside the open belt primary you could try

@dbdevkc Жыл бұрын

@@rebuildingmatt247 I'm running a closed primary on a shovel, so it would take a modification of the high mids. Or I just use the original factory mids that, on the brake side the bracket bolted to the 4-speed trans kicker cover studs, and on the primary side the shifter arm (in my case, the clutch pedal arm) ran through the primary case with bushings and seals. Not a big fan or all that pressure being put on the primary covers - and even on the kicker cover studs.

@rebuildingmatt247 Жыл бұрын

@dbdevkc yeah I hear ya. Check out this link they have 4” mids like this i don’t know if you ever seen that way before prismmotorcycles.com/products/4-mid-pegs

@Jessica_Garcia_777 Жыл бұрын

Get it!! 🔥🔥🔥🔥💯💯💯💯🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽👏👏👏👏👏👏👏👏 #c10 #youtube #trucks #corpuschristitexasnatives #1965 #oldschool #diesel #c10cab

@nxdiagxrcia Жыл бұрын

Long awaited video 💪🏽

@sistinechoppers Жыл бұрын

Where did you get those mid controls I’ve been looking for some and if I can’t find any I’m about to attempt to crudely fab some up

@rebuildingmatt247 Жыл бұрын

I got em from main drive cycles on Instagram

@sistinechoppers Жыл бұрын

@@rebuildingmatt247 Hell yeah I’ve seen their web page but it says sold out so I’m gonna make me an insta account and get them. I didn’t wanna rip off that sick idea but support it. Literally the best simplest design I’ve ever seen. I’m a small dude 5’4 so those will be super badass for me to have.

@rebuildingmatt247 Жыл бұрын

Yeah man I got mine when it said sold out too,send him a direct message and see what he says ,I just messaged him and ordered thru DMs he was like “yeah man I’m actually finishing up a set right now “ and boom ordered those

@rebuildingmatt247 Жыл бұрын

Yeah man they are awesome stance! I’m 5’11 and they are super high for me but ima run them regardless ,I have yet to ride the bike,but this week I should be lol

@LuPapa-e1n 8 ай бұрын

@@rebuildingmatt247have you ridden more with the high mids setup? What do you think? Thinking about ordering some, I’m 6.0” and wondering about riding position and comfort

@frankmendoza6337 Жыл бұрын

I call this quality time with dad ❤❤😊

@Rif_Leman Жыл бұрын

Man, just RIDE that Shovelhead. Ride it for two full seasons before you think about modifying it.

@rebuildingmatt247 Жыл бұрын

We’ll I already done work to it right now haha might post another video this weekend..but I already had a vision to build it lol but I wanted to finish my c10 but yeah I definitely wanna enjoy it than build it but you know how that goes,straight money pit ,my main thing is I don’t want it sitting for long periods of time I wanna ride this as much as possible

@SaddleTrampTV Жыл бұрын

Good swap, man! As far as what to do with it; do what needs to be done first, because what can be done can break you before you can afford what it needs.

@rebuildingmatt247 Жыл бұрын

Exactly what I’m doing I’m almost done with the work I started already and I’ll post what I have done so far it’s HUGE 🙌🏾

@twinsmotogarage1866 Жыл бұрын

A shovelhead for an ironhead seems like a pretty solid trade!

@rebuildingmatt247 Жыл бұрын

Some say it’s impossible but hey 😎😎😜

@ridingfree70 Жыл бұрын

Nice trade, cant wait to see what you do with that shovel.

@old_shupshe Жыл бұрын

1. I've seen this before, a sportster is NOT a Shovelhead. The heads look similar, but they are very different. 2. The sportster and its predecessor the K-model were to combat the British bikes in the 50's. British bikes had right side shift. All of them were used for flat track racing which was left hand turns, and as you said, they put their left foot down in the turns. Good vid. I'm currently working on a 65 sportster basket case. Would love to get my hands on a pre-74 Shovelhead. Have fun with it!

@rebuildingmatt247 Жыл бұрын

Oh yeah definitely man I said that as a joke definitely huge difference in a IronHead and a Shovelhead 🤣 but thank you for looking out and thanks for that information! That’s sweet man I bet that’s ganna be a sick build! And yeah I definitely can’t wait to build this Shovelhead I wanted a generator shovel but I’m definitely happy with this 76 🙏🏽

@rebuildingmatt247 Жыл бұрын

I’d eventually want to build a sportster too later on down the line,sportster are great as well

@old_shupshe Жыл бұрын

@@rebuildingmatt247 Didn't mean to sound grumpy. Last weekend I drove 2 hours to look at a "78 Shovelhead" that turned out to be a sportster. When I explained the difference, the guy got mad at me. Too many people have no idea what they've got.

@rebuildingmatt247 Жыл бұрын

Oh yeah especially on Facebook marketplace the value difference is huge as well lol I woulda been mad too tho if I was you lol

@chanceburger3169 Жыл бұрын

I enjoyed seeing the older bikes,noice video

@rebuildingmatt247 Жыл бұрын

Definitely,I love vintage bikes or vintage stuff in general 🙌🏾thanks

@Jessica_Garcia_777 Жыл бұрын

Great audio ⚔️🔥🔥💯👏👏👏 “average” 😮 you are above average!!! 😎✨

@Jessica_Garcia_777 Жыл бұрын

Awesome!!!!🎉❤

@nxdiagxrcia Жыл бұрын

7:10 not the trash chasing you 🤣😭

@nxdiagxrcia Жыл бұрын

The long awaited upload ✊🏽 🔥

@Jessica_Garcia_777 Жыл бұрын

Happy 4th of July weekend, Matt! 🚙

@Jeremiah_vision Жыл бұрын

You gotta drop another video 🔥

@rebuildingmatt247 Жыл бұрын

Soon

@Jessica_Garcia_777 Жыл бұрын

🔥🔥🔥🔥

@Road_Rash Жыл бұрын

Sounds like a good project...I'll sub for that...especially if you're learning from Gibson63...Steve is the man...🖖🏿😎👍🏿

@rebuildingmatt247 Жыл бұрын

Yes sir I’m doing the best I can

@rebuildingmatt247 Жыл бұрын

Thanks for the sub!

@dantelim2458 Жыл бұрын

what is the purpose of boxing?

@rebuildingmatt247 Жыл бұрын

Reinforcing the frame,it adds more rigidity to the frame really since the Cummins motor has a lot of torque and what not it’ll pretty much stiffen up the frame so it doesn’t bend,twist,collapse or what have you for example

@HighlyPaidHandyman 2 жыл бұрын

Wow. That’s awesome! Love the wood cab apparatus.

@rebuildingmatt247 2 жыл бұрын

Thanks man 🥶🙏🏽

@bencontreras2998 2 жыл бұрын

Very nice

@rebuildingmatt247 2 жыл бұрын

Thanks man 👌🏽

@israelperez5786 2 жыл бұрын

I'm 58 and just picked me up a project 1965 C10 just one year younger then me and, I'm going to hive it a shot on trying to build it like I want it. it will be my first frame off patina paint..

@rebuildingmatt247 2 жыл бұрын

Nice man yeah that would be awesome I love these trucks! But my favorite Truck is actually a 1958 Apache lol but regardless this is my first build ever and I’m loving every bit of it,only 23 years old but I have tons of love and passion for these classic trucks

@israelperez5786 2 жыл бұрын

@@rebuildingmatt247 agreed my last one I regret selling it was a frame on 1986 C10 and I wish i still had it.

@rebuildingmatt247 2 жыл бұрын

Yeah I love those squarebodys,its like that saying, you never know what you had till it’s gone lol

@israelperez5786 2 жыл бұрын

Why did you have to support the cab with the brackets inside?

@rebuildingmatt247 2 жыл бұрын

It’s pretty much a endoskeleton for the cab so when I took it off it doesn’t warp or miss align anything because I had that fire wall cut and doors off,leaves it kind of less structurally sound

@Jessica_Garcia_777 2 жыл бұрын

Great job 🚙

@casanovasprojectcars 2 жыл бұрын

What motor mounts did you have on it?

@rebuildingmatt247 2 жыл бұрын

Custom

@casanovasprojectcars 2 жыл бұрын

@@rebuildingmatt247 yea I seen on your other video hopefully I can make some just like it for mine

@rebuildingmatt247 2 жыл бұрын

I’m going to be making a updated better version soon I’ll try and make a video on the process

@casanovasprojectcars 2 жыл бұрын

@@rebuildingmatt247 i was trying to get some ideas yours video sure helped bro I posted a video of how I fabricated some motor mounts for my 68 I still need to weld a 90deegre plate that will be welded on the bottom we’re to motor mounts will sit.

@rebuildingmatt247 2 жыл бұрын

I’ll definitely check it out! Follow my Instagram and tik tok I’m up to date with the builder on there ..I’m behinf on my KZbin videos

@nxdiagxrcia 2 жыл бұрын

The 🎥 camera crew came out in this one 😭🤣💪🏽

@MCBlueCreeper 2 жыл бұрын

you need like a intro. (KZbinr voice) Ayoo what is up guys today we are repainting the 12v Cummins. 😂

@rebuildingmatt247 2 жыл бұрын

Alright I’ll definitely work on the intro I was thinking the same thing😂

@ProjectK 2 жыл бұрын

Excited to see this beast on the road soon.

@Jessica_Garcia_777 2 жыл бұрын

Awesome 👏 😎

@nxdiagxrcia 2 жыл бұрын

Cant wait till it’s done and running 💯

@markroadking 3 жыл бұрын

hope ya'll had some jack stands deployed while using the floor jack....

@rebuildingmatt247 3 жыл бұрын

I believe we had them on the frame sides if I remember correctly lol

@JD_GALLO 3 жыл бұрын

Forgot the truck rebuild the Harley!🦅

@rebuildingmatt247 3 жыл бұрын

I am too🤣🤘🏾

@jeffunger7720 3 жыл бұрын

Love that body style

@rebuildingmatt247 3 жыл бұрын

Thanks Jeff me too🤙🏽

@jeffunger7720 3 жыл бұрын

Hell yeah brother!

@Jessica_Garcia_777 3 жыл бұрын

Great job Matt!!! #nevergiveup #neverquit This is amazing!

@Jessica_Garcia_777 3 жыл бұрын

#cummins #c10 now that’s some determination 🔥

@nxdiagxrcia 3 жыл бұрын

Finally back at it 💪🏽

Ең жақсы KZbin

Пікірлер