Why is she sewing over the pins how’d the needle not break it hit the pins like 2 times
@MargaretWillits14 күн бұрын
Thank you so much! I found and removed both the green thread (recent) and some thicker black thread from longer ago! The oil worked well!
@stefelliottmathilde17 күн бұрын
A2 in B2!!! Thank you soooo much!!!!!
@miztenacioust175818 күн бұрын
Beautiful hem! There's definitely a learning curve! 😂 I'm still trying to get the hang of this attachment. I love how clean those results are. Thanks for the video! I'll keep practicing.
@marymerrill161219 күн бұрын
Thank you for all you do for us!
@LaizyDaisy20 күн бұрын
Thank you so much for sharing your knowledge and expertise.
@jayjoob29 күн бұрын
can i use mod podge????? its all i got rn
@karenhickey3377Ай бұрын
Great video! This is very helpful. Thank you 😊
@NedouxSewsАй бұрын
Very helpful, thank you so much!
@TRKelleyАй бұрын
Thanks! just the information i needed. I like the C-clamp idea too.
@susanc.8009Ай бұрын
If you put just a little spit on your finger tip and apply it to the back side of the needle hole, the spit will pull the thread through.
@janemartin229Ай бұрын
I was always told not to mess with the bobbin case tension.
@SK-jy5gsАй бұрын
Such a shame the handle was out of view.
@zombiedoggie2732Ай бұрын
Would this post work on a Singer 66? It is longer than the 99, and the 221 "Featherweight." the Singer 66 is essentially the "Big sister" of the 99.
@fancy8365Ай бұрын
My featherweight decal is missing the rivet gold screw. What could I use to replace it? The circular singer seal emblem is popping up on one side. Thanks for your help
@featherweightshopАй бұрын
Contact our customer service directly through our website for specific parts requests. Happy to help!
@cj2sewАй бұрын
Every time a friend will come and ask me "Why is my featherweight not doing ......?" I tell them to go to your website, or I find the answer to their question and tell them to watch your video. I purchased this gauge and am very thankful you invented it. Thank you for helping the public who love this little machines. They are wonderful.
@debhamer9644Ай бұрын
So nice to have a video ❤
@CaillouPillarАй бұрын
Would the wax be an okay protective layer for any added paint used for decal restoration? Or do i need to break into the world of shellac?
@sjweigel9671Ай бұрын
Thanks much. This worked I was able to remove the small screw but then did the oil immersion trick. My patience is zero so I only waited about 30 minutes but it did loosen up and I was able to remove the piece of thread. I admit I did not remember about holding the threads or the wheel direction. BAD on me. I will try better in the meantime. But then I saw about the thread removal tool. I am a bit confused that the thread will "just disappear" without being removed if you use the tool. Can you clarify? thanks.
@karoliyer4860Ай бұрын
Very nice instructions….but seeing the handle is important, you need to redo this video…thanks😊
@donaldharris1763Ай бұрын
Is there an adjustable foot controller for a 7256 Fashionmate?
@katecoster36172 ай бұрын
You made it easy! Thank you
@debbiegoad59072 ай бұрын
Thank you so much for a great video for oiling!! Much easier than trying to see the points in my instruction manual. My FW now purrs like a kitten!
@tamaraheptinstall9892 ай бұрын
😊
@stephaniemcintosh23242 ай бұрын
Where can I get singer attachments to buy.
@featherweightshopАй бұрын
We have them all on our website. :)
@juliewerner95922 ай бұрын
Hi , I live in Australia , how do I get the horizontal Aurafil style holder please 🧵jules
@featherweightshopАй бұрын
Available on our website at the links provided in the video description - happy to help!
@valeriemontgomery66782 ай бұрын
You’re a sewing machine angel!!!!!
@lauriemerrill2732 ай бұрын
I need to know if the recovering takes the strong musty smell away, or do I need to paint with Kilz first. I have taken all the Rolex Off and I am patching the wood now.
@cynthiahenzler51702 ай бұрын
Perfect! Thank you now I just figured out using this video why my machine was not making stitches 🌺
@BridgeMD2 ай бұрын
Wow, genius!
@WirelessPenson2 ай бұрын
Thank you, How do you turn a corner? Eg. Making napkins
@featherweightshop2 ай бұрын
You can only do one layer at a time through the curvature that folds and tucks. You'd have to manually the first few stitches of each side to get around and end at a corner.
@WirelessPenson2 ай бұрын
@@featherweightshop ohhh ok, thank you.
@theoriginalquinnpiper2 ай бұрын
Thank you !
@dalesuhre65222 ай бұрын
That's a lot better explanation of how to use that foot than the original instructions.
@kalyanikhadgi61612 ай бұрын
Shall we bring the pressure in pervious point ?
@709abby2 ай бұрын
You make it look easy. Where can i send mine to you
@featherweightshop2 ай бұрын
Through our website, we have a rewiring service. :)
@lisalu9102 ай бұрын
Looking at the date of the 2020 cruise, I'm guessing it didn't happen due to Covid.
@featherweightshop2 ай бұрын
Here's our Events page on our website: singer-featherweight.com/collections/events
@Cathy_MidwestHome_Hens2 ай бұрын
I feel empowered after watching your videos.
@Cathy_MidwestHome_Hens2 ай бұрын
Great 3-part series!!! thank you, thank you!!!!
@Textilenerd1232 ай бұрын
I’m trying to adjust my needle tension and I fiddled with the number dial, the part that pushes in and turns, and now the tension dial won’t turn even as far as 2 from 0. I’m afraid I’ve really messed up my tension unit. Any idea what I should do?
@featherweightshopАй бұрын
Follow our Featherweight Schoolhouse on our website to Maintenance & Tutorials > Tension for all the videos to walk you through what to do. Happy to help!
@conniemoon92002 ай бұрын
Do you have any decals for any other brands of machines?
@featherweightshop2 ай бұрын
As The Featherweight Shop, we only carry decals for Featherweights.
@ethantastic2 ай бұрын
awesome, just what i needed for a Singer 628 pedal
@ethantastic2 ай бұрын
ended up Dremeling the hole for the screw to let the L shaped contact slide over
@gabriellagrimaldo63353 ай бұрын
The only problem is I don't have the key.
@featherweightshop2 ай бұрын
Keys are available on our website. www.Singer-Featherweight-com
@cekfraun3 ай бұрын
I just saw someone post on facebook that she painted a Kobalt mini tool box black and put on Singer decals. It looks fabulous! Wondered where she got the decals. She linked to the Featherweight Shop, where I found this video. Thanks! I'd love to get a Featherweight professionally painted in a cool color like bright blue, but I don't know where to find someone who does that. Love the decals, though!
@barbaracaplan94053 ай бұрын
At 7:38 minutes, please mention to turn the pin so the groove and wire will face down.
@susant57223 ай бұрын
Ug! Every 8 hours! Excellent video for directions
@klyon49313 ай бұрын
I have my grandmothers featherweight, it still works, has it's cabinet, a little worse for wear, because my mom used it for 6 kids, but when I tried to sew on it as of late the stitching bunches up, so with this video maybe I can remedy that. It is a family heirloom that I want to leave to my daughter, so she can think about her great grandma, her grandma, and her mom sewing on it in the past.
@izannahwalker33663 ай бұрын
Vous êtes un gars génial!!! vous expliquez tout si bien que moi qui suis française, ne comprenant pas bien l'anglais, n'y connaissant rien en réparation, j'ai trouvé la solution à mon problème, seul bémol je n'arrive pas à enlever la vis, elle est trop serrée....Après avoir cassé plusieurs aiguilles c'est grâce à vous que je sais comment mettre correctement l'aiguille en place. Merci infiniment pour tout, dommage qu'il n'y a pas d'école et de cours en France, j'aime beaucoup cette machine, elle fait un beau point droit et elle fait un joli bruit.
@kindbearbrown19263 ай бұрын
Thank you
@kathyoneil78543 ай бұрын
Thanks! I fixed the nesting issue on my 221!
@debrapopejoy71913 ай бұрын
My mother-in-law was a fantastic seamstress. Me, I can’t sew (xcept zippers not sure why that is) I hate sewing therefore I don’t sew unless I have to. My mother-in-law gave me 2 featherweights one is a 221 the other a 221K. When I would try to sew something the bobbin thread kept getting jammed up. I finally decided to do something about it so I watched your video , followed it to a “t” and then some. I ended up taking the bottom off to get to the thread sure enough there was about a 3 inch piece of thread wound around the outer housing of the bobbin. So thank you I never could’ve done it without your instruction. I feel so good about fixing it that now I’m going to attempt to fix my old pellet ice maker. Wish me luck✌️😎