Similar to the Kia Rio ... Thx for the video

That's so helpful thank you! We had it replaced at her service last time and it went out again within hardly any time at all. Now I feel I can do it myself. Love that you included where all the bolts & clips are, the whole process

I really wanted to love this product but I'm crossing my fingers for a bagged cordless. Maybe one day. As a genuine HATER of Dyson cordless (I've had a horrendous ownership experience with a flagship Gen5Detect), I am loving my Miele C3 with a bag. The bag makes everything so damn convenient and clean. No faffing about. Replace the thing every 6 weeks or so and voila. Takes 30 seconds.

What is the mettle pin for that is attached to the winder

When do you have to change the timing chain on the Captiva 2,4?

Man they don’t make this easy to get to. Dealership wanted $300 to change both!! Your video helped me change them myself! Thank you!!

I have a HX1 pro with the dual batteries . It’s a nice looking machine but I have a corgi . He sheds a lot . The bin is difficult to clean all the time . I know Miele recommends empty and clean every three months but I like to prevent dog odors in my machines so I like to clean them up after every use . I bought a Tineco S15 pro and I couldn’t be happier .The filter is a cloth one you can vacuum off with your big vacuum . It’s much less tedious to clean .

Very good instructions

All that faffing about with emptying, cleaning the filter and exposing yourself to all the dust and allergens really kills this vacuum. It's a shame because I love that you can put the motor/dustbin etc further down so it's almost like a small upright form factor. To me that is way preferable to the stick layout where you're bearing all that weight at the top. Looks nicer, easier to handle etc...Miele got that design element right but the entire dust collection methodology needs a complete redesign.

Thanks, I changed my bulbs yesterday with the assistance of your video. However I took a shortcut and only removed the front clips and bolts, and was able to still have enough room to see, and replace the bulbs. Thanks man.

Suuuuuuuuper helpful thank you man!!!!!

Thanks Great review very honest

WHAT A SHITBOX

These videos are fake don't work

What is the bulb type for the hi-beam?

Is there any risk of the airbag going off when removing that?

very useful. Many videos didn't show how the bolt was removed and you actually did. Thanks

I hope all you people realize this is ridiculous to have to deal with all the cleaning of the "filter". All the shit and allergies go right into your face and nose while cleaning it.. When you have a bagged unit, everything is filtered perfectly and the bag contains all the shit. These piece of shit cordless, bagless crap are ridiculous....

Cheers Mate! Helps a bunch

Hi, you are a legend mate, I have exactly same car as yours and with same issues 😂 now I change my car’s engine oil, oil filter, air filter, cabin filter & solenoids with the help of your video. Thanks so much. God bless you 🤲🏻

Thanks mate, have to change my passenger side headlight. Now I know what to expect. Much appreciated 🤙🏽

Awesome thanks!! Never done it before but was so well explained 👏

legend

Dude, leave us hanging, we needed to see the engine light go off!

Don't mean to be rude but this is a lazy video and won't work for first timers. Those two bolts will be so tight that you will need a socket wrench for both. A ring spanner won't work for the sump plug and an adjustable won't work for the oil filter. Because those two bolts will be tightened to torque spec and very hard to get off. You will also need to lift the vehicle with either ramps or stands so that you have room to use the socket wrench. The only reason this works I'd because his bolts are only tightened by hand, which is the incorrect way to do it. The plug and the filter have a number on it and they are supposed to be tightened accordingly. If you are doing this yourself for the first time you will need: Oil Filter Ramps or stands 15mm socket wrench 32mn socket wrench Otherwise you'll have a rough time. Also tighten it properly. Use a torque wrench

That is a 40v

Tested out both the HX2 Pro and Dyson V10 Absolute. Ended up getting HX2 Pro ($Au300 off RRP)...., so much higher build quality, suction felt close to the same when testing in the store carpet sample with maybe Miele a little stronger, Love the barrel/motor down low as it's so much more comfortable to use than up the top, the V10 was heaps noisier (I reckon over 50% more db) and the plastics felt so much more cheaper in the chassis and parts compared with HX2 Pro. I have no prob's with cleaning as I use an air gun on the compressor to quickly clean the filter and bin after emptying which makes it so much quicker (less than 1 minute to do). The only shortfall with HX2 would be the smaller dust bin size compared to the V10. A big winner for us with HX2 was the 2nd battery and charging dock in the kit which is essential with a stick vac.

That is so excessive

thanks for this tip. do you know how to change the languange on the dashboard?

Got a Miele dishwasher, washer/dryer and so guess what my next purchase is this HX2 PRO, you buy this brand for build, quality & performance 😊👍

That is a perfect video - step by step instructions, very thorough! Thankyou - I feel much more confident changing my blown bulb…

Nice work , I might test it before putting all the screws and bolts back on.

I Miele product. The c3 cat dog powerline is awesome, love it. But this POS here? Don’t buy it. The dust filter is extremely difficult to remove. Mine started to leak vacuum after just a couple of months. Its underpowered. Its just a really poorly engineered/designed/made POS.

awesome thank you

Thanks for this tip. It was very helpful.

I had this fault code P0010 before and I changed the Intake and it’s gone, but I have now another error code P0700, and when I went to Holden company, they said that I need to change the Transmission Control Module. I don’t know exactly it’s location in my car. Holden Captiva LTZ 2015 2.4 Petrol.

Awesome review, thanks! Ryobi are dumb not to make decent videos like this lol.

Engine is full of dust maybe next video will show how to clean up the engine bay lol

worked on captiva 5 2013; cheers

Mine stops every time I get to the carpet.

Thanks mate. Glad I came across this. I upgraded from a very old 18v unit and had no idea what I was doing (especially with the bump feed) so this video was perfect. This thing literally blew me away on high. I had no idea it was going to be this powerful.

Hello, thanks for your video. What is the shop where you found that particular part? Is it in Australia?

Very helpful! Thank yoy

Does this model have an " ambient temperature sensor " ? if yes, Where is this sensor located ? thank you very much.

Merry Christmas 🌲 and Happy New Year 🎉2024

thank you so much 👍

I've exactly the same model, quite useful for me, thank you very much👍

Can anyone tell me if the cheaper 36v model that is not brushless is comparable to this?

They are amazing very good quality

Miele the best one I have one it’s very nice I can’t find something like that in the market it’s hard work compare the other they are number one