I just bought one, great little plane isn't it! Thanks for posting this video!
@denismoran6708 ай бұрын
Quel idiot
@Mr_ZigZag Жыл бұрын
Nice good job, do u think it’s a good beginner plane ?
@mikbacitube Жыл бұрын
Hello , no it is stabilised but has a very short wingspan therefore quite squirrelled in the wind. As a beginner you better choose a trainer .
@metalman4141 Жыл бұрын
Electric Ben Buckle aircraft….. I don’t think so .
@mikbacitube Жыл бұрын
Wait to see the Electric Tiger Moth...
@GreenMachineRC Жыл бұрын
What battery are you using?
@mikbacitube Жыл бұрын
You can use either a LiPo or 2 18650 lion batteries I personally use the GNB 5000mAh 2S 5C LiPo Battery . Lasts for ever once charged
@looneytunes47 Жыл бұрын
80 grams holy shit that much weight would make mine nose dive into the ground....i only needed 28 grams of weight while using a 1000mah 3s battery
@henrirotthier5710 Жыл бұрын
thanks for the review 👍
@marinasavina51032 жыл бұрын
Un bellissimo e unico panorama. Grazie Paola e Michele. Divertitevi. Marina
@Rc_impulse2 жыл бұрын
I just got a case and handle and didn’t realise I have to open the radio up🙈
@mikbacitube2 жыл бұрын
It is very easy there are lot of video's on KZbin for this . Just undo the back screws and take the old handle off and put the new one on. If you stuck let me know I made a video to show you
@Rc_impulse2 жыл бұрын
@@mikbacitube just did it :)
@ludwigvanzappa95483 жыл бұрын
Thank you!
@agremlin773 жыл бұрын
Super! Nice footage 😊 liked & subscribed
@mikbacitube3 жыл бұрын
Thank you very much Sir
@bacccci3 жыл бұрын
Nice
@backyardbasher3 жыл бұрын
Great review :) , I did not know the X came in white, I thought every X was black and every S was white.
@Dread-I-Productions3 жыл бұрын
thumbs up mate ;)
@RanubisAmadeusWolfgang3 жыл бұрын
ABSOLUTELY KILLER CONTENT! I'M SUBBING YOU MATE, 😍😍😍😍😍😍😍
@FPVGaps3 жыл бұрын
That's not the cobra X that's cobra s so your video is not a review on cobra X
@mikbacitube3 жыл бұрын
Naah. Hello trolly I have proof and you do not .
@FPVGaps3 жыл бұрын
Idk what trolly means but you only hold up and talk about the cobra S that's all I was getting at.
@Fireonthesticks272 жыл бұрын
There is a white version
@TheCivildecay Жыл бұрын
There is a white version of the cobra X (because people prefered the cobra S colors over the black cobra X)
@Burwhale13 жыл бұрын
Thumbs up for the "Fast unboxing!" .
@Sanadb3 жыл бұрын
this is awesome mik!!i have the mini 2 but lately getting interested in fpv drone!keep it up :)
@brunofporto3 жыл бұрын
The third party video is for when you use a non Skyzone receiver where you set the frequency directly at the module and not using the goggles user interface. :) Great review, thank you very much!
@gusnitaindarahyu21293 жыл бұрын
thanks
@damienjensen19013 жыл бұрын
Hey Mate greetings from Australia thanks for the review hope you get better soon. I am contemplating buying these and have similar qoggles to your older eachine box goggles. Is the picture clarity and quality and screen much of an upgrade compared to your vrd2s or only slightly? Have you found the screen to be alot smaller on the Cobra then the older box goggles ?
@mikbacitube3 жыл бұрын
Dear Damien. Thanks mate.The picture is much better and as you say the screen look slightly smaller but way much better. Its better defined and you can actually see the whole screen at glance. There is hardly any delay if you are recording . And I should say is way better defined. So far I used only a nano camera on the Tinyhawk II but the improvement and comfort were significant
@glyngrist38983 жыл бұрын
So how does it get its power, Where's the battery connection in th schematic?
@mikbacitube3 жыл бұрын
The power comes in in VCC and GND near the engine entry I did not put it there.. Apologies.
@glyngrist38983 жыл бұрын
@@mikbacitube hi, thanks for that, I watched the vid a second time and figured where you had powered the board from, thanks for a useful video, do you have any info regarding the USB mounted chip that comes with the package?
@mikbacitube3 жыл бұрын
I cannot get it at 2.7k ffs youtube
@adrianestrada41373 жыл бұрын
Good review than you! Was the video foot just from the DVR?
@mikbacitube3 жыл бұрын
Yes it was
@remzibi99324 жыл бұрын
Nice review :)
@chrisbarclay61274 жыл бұрын
I've only built one stick and tissue model and that was rubber powered. Surprisingly it came out ok... Now I'd like to tackle my first rc stick built. Does this Ben Buckle have full instructions on how to install the motor, battery and all the RC equipment ????
@mikbacitube4 жыл бұрын
No it doesn't you will have to build a firewall and allow space for your battery . Then finish the nose to your liking. I can send photo's and do a little video if you like.
@chrisbarclay61274 жыл бұрын
@@mikbacitube That would be a good subject for a video.... there's not enough info on how to take these old free flights and bring them into the new world....
@mikbacitube4 жыл бұрын
@@chrisbarclay6127 Here you go Mister kzbin.info/www/bejne/nYnNcn-aZpZ1isU
@matthewfoxx64104 жыл бұрын
Great stuff, thanks for the reply I think it will take longer for me to build mine.lol I haven’t built one for well over 20 yrs .All the best.👍
@matthewfoxx64104 жыл бұрын
Excellent , I’m just thinking of pressing buy it now after watching how well yours flew. How long was you building yours? And green for the colour, think that was a good choice. All the best.👍
@mikbacitube4 жыл бұрын
It took me quite some time . Two weeks in the evenings and a couple of afternoons.The problem is that if you allergic to Cyano glue then you got to use aliphatic glue and it take at least an hr to set in. That take time... But nothing that a bit of music and a coffee can't cure ;-)
@SpaceFaceFPV4 жыл бұрын
actually, the DVR doesn't show up a delay at all while recording in NTSC mode (pretty sure PAL too) you just have to back out of the DVR menu before flying after pressing + to being recording ;)
@IansRCExploits5 жыл бұрын
Two years down the line, what do you think now of the Tundra?
@mikbacitube5 жыл бұрын
In Two years the Tundra served me really well as an fpv platform and and as all rounder . It is almost impossible to crash and i did that twice ...always because of my error in set up (inverted the aerlions.... Lol ) . The first time I ripped the landing gear and I picked it up launched it manually and landaded it on its belly..... Indestructable ..... The second time I stripped a servo.... I love it and I was thinking to buy another . The cf prop is a bit too fancy it shatters at the first nose down I found it work wonders with a normal apc prop. All in all a great plane it will always deliver and it is undestructable.... I will probably buy another one to keep and fly on a frequent basis. The only one I re bougt and kep was the Parkzone Radian... And this is comparable is reliability and enjoyment .
@IansRCExploits5 жыл бұрын
Yes I love the Tundra it truly is a class plane, I've considered buying another and there's nothing wrong with mine Lol
@boeing747400ifly5 жыл бұрын
Thanks for this, Mik. Just put mine together today. I couldn't see what those three small pieces for the front tongue were for. Thanks again.
@flyhigh65915 жыл бұрын
Does it have RSSI?
@mikbacitube5 жыл бұрын
I have not checked it. I take it on the gui there will be an enabling menu for rssi. I fly FRSky so I got rssi on my tx
@choppergirl5 жыл бұрын
I can't get any composite video signal out on Vout and ground of the Remzibi. I tried all sorts of combintations. I'm going from the Remzibi not to a video transmitter, but direct to a Display LCD panel. I have mine powered with a 9volt battery to Vcc and ground.. it powers up the red light on the Remzibi, and blue light on the GPS... then the blue light goes out but the red light stays on. No video out though at all. I tested my monitor composite in and it works fine with a handheld video game that outputs composite out. I assume the ENG line is for measuring voltage from a quadcopter battery pack... but does it need to be high for the Remzibi to work???
@mikbacitube5 жыл бұрын
Hi, looks like you need possibly to check on the gui if the vout is enabled. Or you have a dodgy connection somewhere. Try with a lipo maybe the 9 v battery is not giving enough juice. That is all I can think of while working :-)
@choppergirl5 жыл бұрын
@@mikbacitube I got it working, off a 9volt powerbrick... I guess I wasn't getting enough current via the 9volt battery. However, I'm only picking up 1 satelite whereever I move it outside, which I need at least 3 or 4 to triangulate a position. I tried raising it, and moving the GPS antenna as far away from the Remzibi as I could taped on a ruler as an extension to my cardboard box... also turning off my LCD monitor.... no change. My hand held car and aviation units can pick up 3-5-7 or so satelites if I give them a minute or two... so I know it's not location. Someone mentioned adding a GPS antenna to it, is this possible? Is there a connection? First boot screen before pressing Home Position Saved button: www.homebuiltairplanes.com/forums/album.php?albumid=746&attachmentid=77748 I'm going to try leaving it outside for like 15 minutes, maybe it just needs to capture an almanac from one of the satelites: www.maptoaster.com/maptoaster-topo-nz/articles/how-gps-works/how-gps-works.html
@mikbacitube5 жыл бұрын
@@choppergirl if it picks one up then there will be more. I am in UK and I get approx 8 to 15 sat connections, sometime weather front, positions etc count. Wait and be patient. Having it out helps if it is not below 0 or nearby. Temp affects electronics
@choppergirl5 жыл бұрын
@@mikbacitube I don't know, it may be a bad GPS unit. I left it out for 75 minutes and still only one 1 satelite. I'll try again in a different location. My other commercial aviation and auto GPS units don't seem to have a problem, so it may be a budget old GPS chip.
@choppergirl5 жыл бұрын
Now I just need a good source for a cheap good camera for video in and a good cheap LCD for video out.
@choppergirl5 жыл бұрын
Do you go from TX to RX, and RX to TX?
@JayDrone5 жыл бұрын
1st gr8 video bro
@mikbacitube5 жыл бұрын
Thanks
@edo70056 жыл бұрын
Which reciver did you use?
@mikbacitube6 жыл бұрын
Edo's TechLab I used an orange receiver then. I am migrating now to FRSky.
@redalrt46 жыл бұрын
I've been looking for An OSD like this that does not connection to a flight controller. Your videos have short concise explanations. Thank you.
@matthetriker6 жыл бұрын
this usb win 10 driver also is a fix for the mobius tarot gimbal from hobbyking !! brilliant thankyou. Ps some one ought to tell hk.
@mariuskatutis38536 жыл бұрын
#FUCKEASA
@epicmoments10276 жыл бұрын
I'm having problems keeps looking for satellite
@HITSVIDEOS886 жыл бұрын
Sir how to program dji naza m lite
@mikbacitube6 жыл бұрын
Hi there Quadcopter X , You need first of all to download the drivers and the GUI from DJI for the Naza Lite . This is the link to the DJI site where you can find all needed software. www.dji.com/naza-m-lite/download After having this done please connect your Controller to the PC and make sure windows allows the controller to have access. Having done this open the DJI Naza M assistant and program away.
@GenesRCAddiction6 жыл бұрын
I'm glad I got mine free. There junk.
@mikbacitube6 жыл бұрын
for the price they go for I beg to differ...
@GenesRCAddiction6 жыл бұрын
mikbacitube I recommend MJX goggles and fpv setup much better than this junk.
@SpaceFaceFPV4 жыл бұрын
@@GenesRCAddiction one mans junk is another's treasure lol.
@GenesRCAddiction4 жыл бұрын
@@SpaceFaceFPV sometimes lol otherwise it's just junk
@f450fpv76 жыл бұрын
Good
@paristaladianos22096 жыл бұрын
hello i connect the usb with the osd to my computer like yours,i open the GUI program,i connect it with the com 7,it seems connected but i cant save any change...i start test and says fail-osd didnt respond-what should i do?
@privateagent6 жыл бұрын
Yeah my thoughts exactly, this bird is very limited in power (at least with the stock components) so adding weight to the nose also makes me nervous.
@harshsharma50026 жыл бұрын
Nice video but not a best sunny day to test the cam though. Keep it up!!
@mikbacitube6 жыл бұрын
Thanks, you are right , on the money on that . I had the same doubts, but could not wait .... lol
@ildxnnyli55416 жыл бұрын
CAN I JUST BE TOLD THE ANSWER TO THIS CAN I FLY A DRONE AT 13 YEARS OLD UNREGISTERED OR NO OMG I HAVE BEEN LOOKING FOR AN ANSWER ALL DAY LOLOLOLOL
@mikbacitube6 жыл бұрын
Hi Danny , You can fly a drone at 13 if it is designed for a 13 years old . For example the Makerfire Tinywhoop can be flown by you. It is less than 250 Grams and cannot hurt you or anyone else. Just make sure that the drone you fly is small for to start with and maybe have an adult supervise you. also fly in open spaces away from houses airports or military installations .. it helps . Good luck
@TheM6aae6 жыл бұрын
You have a lovely flying site!
@mikbacitube6 жыл бұрын
Thanks I hope your enjoyed it .
@jzflmr60897 жыл бұрын
i have the 2013 version and is works perfect.. www.ebay.com/itm/DIY-Remzibi-OSD-Open-Source-V1-79-5HZ-GPS-for-Quadcopter-FPV-System-2013-Version-/122365239499?epid=1752659659&hash=item1c7d8960cb:g:d2IAAOSw4A5Yq80b