Great idea! Question: how well does the marker show up on the "polycrylic" topcoat?
@NaileditBuilds2 күн бұрын
Sharpie shows up fine.
@sisepuede56123 күн бұрын
for the algorithm
@rockman49er3 күн бұрын
Is it OK to have your welder so close to the table small pieces of metal could get inside your welder and break it I like your way of thinking though and I'm definitely going to make those clamps and othe accessories you made I already have a bunch of those clamps in different sizes great video I subbed
@brianjoson20794 күн бұрын
How do you do the ramp?
@eganpete5 күн бұрын
I loved it. You mentioned you had trouble with numbers. I had trouble growing… 5’2” today. But what the heck, I’m comfortable in my own skin. Always enjoy your videos 👍 and thanks ❤️
@joshn28018 күн бұрын
A video on the propane heater would be sweet.
@NaileditBuilds8 күн бұрын
kzbin.info/www/bejne/hZaym5ywnaules0 here you go!
@edwardballow226810 күн бұрын
Very nice review. I have the 21 degree and love it but I'm not framing for a living. I think if you are all day on job framing you pretty much nailed the set up you should be using. That said for the framing jobs I do on my property (70 acres lots of little projects) you can't beat this battery set up especially if you are already running on a M18 platform. I'm in a lot of areas with no electric and to carry my generator and compressor / hose to hammer a few nails is clearly not ideal.
@quintinwhite865310 күн бұрын
The Waitley knockoffs are the only good knockoffs. I've been using them for years and they are awesome.
@ewehmu2116 күн бұрын
I stopped listening after your reasons for not using the propane heater alone did not begin with risk of death. Exhaust gases can lead to asphyxiation without proper ventilation.
@hush594516 күн бұрын
Would be nice with measurements
@canamrider719518 күн бұрын
Just ordered the same table from Walmart for $85.99 shipping included. Whoooohooooo! I'm going to make the tools shown in this video soon after the table arrives. To think I was considering a Certiflat that would have set me back ~600 or more....
@NaileditBuilds18 күн бұрын
Heck of a deal! I might have to buy a second one!
@canamrider719518 күн бұрын
@@NaileditBuilds Agreed. I did cancel the order. Sell is from China, and has enough bad reviews to give me caution. If the table were to show up and bent beyond repair, there would be little I could do to seek remedy.
@canamrider719518 күн бұрын
Walmart today is selling this for $85.99 shipping included. Unless it is folded in half, tis a deal to me. Trigger pulled. 😁
@BreckSkiProductions19 күн бұрын
High ceilings is a must, you may not need them now, but you never know what the future can bring you. I opted for 13ft ceilings for a car lift and the ability to work on my skidsteer with the boom raised all the way up. You definitely can never have too much power, I did a dedicated 200A service and I currently only use about 50A, but the future upgradability is absolutely worth the added upfront expense. My shop is definitely not "small" but I will definitely be implementing some of the things in this video as they are fantastic space savers for shops of any kind. Weather it's a 14x20 or a 50x50, it's inevitable that you will run out of space.
@matthewmcnulty69821 күн бұрын
Very. Cool
@raulmartinez551124 күн бұрын
Awesome workshop man, very well organized, I can see the amount of time you spent brainstorming and creating, bravo! cheers from Spain.
@TrudgewildАй бұрын
Give a man a fish, he’ll eat for a day. Teach a man to make a rod and reel and he’ll… (insert conclusion here) Thanks for the ingenuity and entertainment. Don’t forget the sunscreen.
@streetsharks3933Ай бұрын
Why are you putting your body weight on top of the drills to drill?
@Bdbrad71Ай бұрын
😅
@dmax9324Ай бұрын
Loved your video, went to click the link, not available on Amazon anymore fyi
@captaincrustyradioАй бұрын
Nice "Real" shop, brother. I love all the great ideas. You have motivated me to get my shop cleaned up. Just subscribed. Love your comment..."I don't use nails, because it's not 1932 anymore". All of the builds on my house, new rooms, shop, pool deck, etc., I only use 3" high quality deck screws with T25 Torx. I buy the big 25 pound bucket. Always keep at least 50 pounds extra.
@johnwilkins3995Ай бұрын
That shop is awesome
@calsbarn5996Ай бұрын
I like it! I bought the foldable welding table because I needed the space. Then I added supports and a top to cover those danged slots that tools and small parts kept falling through. I put 5/8 holes in the cover but they had to line up with the slots. However, I miss having a larger table with more and more accurate holes. I wish now I’d done what you did. And I like the fact that you kept the top as-is so you can put it back on the original stand if needed. I also made the same $4 clamps you did but used some 5/8 rod I already had. Those clamps work great.
@eganpeteАй бұрын
Keep dusty my friend 😊👍
@NaileditBuildsАй бұрын
Thanks I really appreciate the support.
@tomlindaharris9823Ай бұрын
How do they not get slammed with road grime??
@NaileditBuildsАй бұрын
I don't travel with it in. Lol.
@venazcueta5406Ай бұрын
What’s the thickness of the plywood and the wood you used on the trim? Thank you.
@NaileditBuildsАй бұрын
Carcass is 3/4 mdf shelves are 1/2 ply. The face frames and doors are 1by ripped to 1 1/2. Then lined with the bead board.
@madman432000Ай бұрын
Maybe make the air purifier so it can duct air outside or inside as you have it now. Can use as an exhaust fan and an air purifier(actually a filter). That is kind of a neat idea.
@NaileditBuildsАй бұрын
I actually did an exhaust fan a few months ago. Videos on the channel thanks for watching.
@taoyokaАй бұрын
how does the milwaukee hold up over time?
@NaileditBuildsАй бұрын
Had no issues with it. Been over a year.
@zorinho20Ай бұрын
Vevor tools are toss of coin. Sometimes you get something good ,other times crap. I bought woodworking lathe and after an hour of using it,repurposed it to a fancy grinder.
@justincarp7041Ай бұрын
Only thing is it need to have hidden hinges and different locking...a screwdriver and its open the way he has it
@matronmalice9867Ай бұрын
Wood floors are easier on your back and joints than concrete floors
@user-gz6fn2yx9fАй бұрын
Sorry man, you should just get a Fireball tool dragon wagon. You can use it for woodworking also.
@67cudaksa34Ай бұрын
just saved me $150 and some asprin
@NaileditBuildsАй бұрын
Glad I could help. Lol. Next video I do some upgrades with it and after beating it flatter I'm no prettyish happy with it. Lol
@peters5333Ай бұрын
Have one. Had many parts missing. Plan to get rid of mine
@terryjohnson31002 ай бұрын
My 13 year old son just bought one of those 100 dollar welders from HF. When do I have the conversation about the cost of electricity with him? ;-) Thanks for the review!
@NaileditBuilds2 ай бұрын
Lol. That's the welder I started on. Tell him good luck. Thanks for watching!
@christopherearl-bq7qw2 ай бұрын
Any suggestions on teaching yourself to weld?
@NaileditBuilds2 ай бұрын
Practice a lot. I'm still learning. Great skill to know.
@Imperfectfornow2 ай бұрын
Have no interest in a welding table. Watched to support you because I really like your channel. I know a lot of youtubers do reviews/sponsorships because generally that's where the money is and I'm sure they mostly perform well. As long as you don't go overboard, I'll continue to watch. But do appreciate the honesty of your review. I really enjoy your channel and your personality. I know as a smaller channel, times can be discouraging. I think you have the potential to succeed if you keep at it. Thanks for the work you put in, to make these videos for us to enjoy.
@NaileditBuilds2 ай бұрын
Thank you so much for the support! Really means a lot!
@eganpete2 ай бұрын
You make me laugh. I sit here, with my drink. Life is good. I like your no-nonsense attitude 👍👍
@Bdbrad712 ай бұрын
I definitely return it $150 still should be better then that
@matthewmcnulty6982 ай бұрын
This is a riveting episode
@allynmcfarlin20742 ай бұрын
Yes - would like to see the details of the RV heater, please.
@NaileditBuilds2 ай бұрын
kzbin.info/www/bejne/hZaym5ywnaules0
@matthewmcnulty6982 ай бұрын
When I saw this. Before. Clicking on the video I thought. You bought 1 of. Those giant pine rounds from menards
@Ding_Bat2 ай бұрын
In my experience, the two biggest shop hacks are to not have your shop share space with your cars, or your wife...
@sanfordkrones822 ай бұрын
Mine came with a blade
@garyplayer69692 ай бұрын
Great video!
@williealvarado20082 ай бұрын
Way to dive right into that project. I can totally appreciate your commitment to an idea. Bottom line, its your boat and your idea and I personally love it. Don't forget to post a maiden voyage (with lot of fish being hooked) when it gets warm enough. Take care and keep these videos coming. Cheers and happy mothers day to the lovely woman in your live. Take care.