Thank you!

I just want to know how to change a window sensor, a faulty, one with a new one how to program out the old sensor and adding the new sensor

Hi, thx for the instructions. I have a phone line connected to the system and central monitoring. But, recently I am getting COMM. Error and central not seeing my alarm signals. Since you skipped this section, can you help provide some color on how to program *41. My phone lines have been verified as good by phone company. So, how can I verify that the programing is complete? Thx

Anyone know why a zone once it is triggered and then the zone restores to normal is not sending zone alarm restore report? *70 Alarm Restore Rpt Code is setup already.

Great walk through explanation. Clear & easy to understand. Much appreciated!!

Cannot say thank you enough. Really saved my ass

Thank you so much. How can I change the title that appears on the display of the keypad (in the first row during normal operation when no alarms are active)? In my case there is the name of the former owner of the house, and I would like to put mine.

Good presentation, despite glossing over a few odds and ends (i.e. things pressed or stated without any explanation as to what they refer to), but that's to be expected with any long, detailed exposition like this. Learned a lot!

you caused me to get 2 raises in ONE YEAR! im eager to learn! thanks so much

fields are programs in zones? or same as zone?

How can I reset my code on the First Alert FA215

I’m stuck on a Fault 05 cannot get beyond that?

FORCE BYPASSING - so you're okay with a Residential customer arming their system with a Window or Door open?

As someone about to modify the programming on the ADT version of this panel which came with the house my daughter just bought, I thank you for helping me turn the abandoned system into something useful to her. Anyone here used the EyezOn Invisalink EVL-4EZR IP interface module? We're looking at it to do self-monitoring on her iPhone.

How do you program a quick night stay key on a 6160?

I watched the whole thing and I still don't know how to turn of the audible alert chime that happens when the 'Check 103 LngRng Radio' alert goes off. That happens when the radio transmitter loses contact with the home station even temporarily. I probably have a weak cell signal in my area and the transmitter is usually restored within seconds of losing the signal (probably because AT&T has some temporary interference) and I can just clear the code but oh, that annoying alert sound that sometimes happens at 2 AM. Even if this happens once or twice a year it's enough for me to just unplug my Honeywell Vista entirely. I would think that since the warning shows up visibly on the panel there 'should' be a way to disable to alert chime. But I haven't found it yet. Not even after watching this video 😐

I have a Ademco 20P ver 10.23. I have reprogrammed all zones and tested. In away and stay mode all perimeter alarms trigger. In the away mode my motion detectors will not trigger in away I can fault them and see them on the keypad but they will not alarm in away mode. I noticed in away mode the keypad counts down as away but the the display reads stay mode after count down for some reason

Your video's are terrific. You have helped me so much I cannot thank you enough..... This is my first alarm system and I am an old fart nearly 70 years old but knowledgeable when my brain works. The crime in my neighborhood is horrible now. I bought a Vista 20P panel with (2) 6160V keypads. I also installed an expansion 4229 and programmed it to Address 08 (for zones 17-24). This part of the system is working fine thanks to your video's... BUT !!!!!!!!! I also installed a 5881enh wireless RF Receiver and cannot make it talk to the 20P panel. The receiver sees my added wireless sensors as noted by the red light flashing on the small panel when I trip the sensors. The green light is out and has never lite up (meaning available zones still or something). I tried to program the 5881enh to address 07 (for zones 09 to 16) for my wireless devices. Did not work. I changed the 5881ENH to address 00... did not work. I have programmed my keypad and zones for RF for zones 9 to 16... cannot make it work. It has to be something really dumb. CAN YOU PLEASE MAKE A VIDEO SHOWING THE 5881ENH ONCE INSTALLED AND HOW TO PROGRAM THE WHOLE THING???? Show the 5 dip switches and the correct settings for pins 2,3,4 (I know 1 and 5 are off). How to make it talk to the 20p and trip the alarm when the 5881enh receives a signal from the sensor. Appreciate any help!

How to find fault 2 on the vista 20

How do I permanently disarm a zone

I have 6160 keypads with my Vista-20P. Is there any way to make these keypads be constantly illuminated rather than only after a key is pressed? These are very hard to see, particularly at night.

Horrible video - it presumes a knowledge level and just goes without explanation. For instant - he starts with the installer code 4112 and then goes to programming 800 as if they are all one code without saying what he is doing. This I learned from another video.

Excellent video. Trying to find some programming tutorials for our new techs. I program vista's on a daily basis. Vista 20, 32, 128 etc. One thing I like to do is *97 before i ever start programming. I also enter the same digits for both partitions. So entry exit will be 30, 30. Ee2 will usually be 40,40. Depending on circumstances. Wish you would have hooked up some demonstration devices on the hardwired zones even if merely a 2k resistor at the end of the wires to simulate a smoke, door, motion etc. Amazing video through and through.

When programming Quick Arm, why program Partition 2? The newbie will not understand this.

How do I program in the Eyezon EnvisaLink EVL-4EZR IP Communicator component, and it's functions to the vista 20p with this keypad?

For some strange reason I was unable to locate the part for programming a key fob

For control4 what programming would I have to do?

Any help and reply would be greatly appreciated - I'm driving myself crazy trying to program one of the function keys (A,B,C,D) on the HW 6160 Keypad to "arm instant" as an easier method than opening the door and pressing # 7. Best Always.

Hello i'm new in this field and im using a sensor Honeywell DT-7235T and i want to connect alarm with it, the sensor is working when i plugged but when it try to connect the alarm with it doesn't trigger ! anyone can help ! they are 4 pins 2 for power and 2 for alarm and there is also the tamper ? should i connect the tamper to trigger the alarm ? thanks for help.

Please help: Suddenly everything quit working: Chime and alarm. I can set the code on the box and it shows the alarm is on, but when I open the door nothing happens. Even replaced the battery. Thanks

This is far better than calling customer service in India. I tell them what the screen says and every representative I talked to ask me, does the outlet work? LOL. They are reading from a list and have no idea what you're talkin about.

Can I delete a zone and reprogram it?

I am trying to program a RF window 5816 sensor and on the play back RC is showing AA. Should it be 10?

nhu ccc

Great video. Question : I have Honeywell 6000 Home Security System. I have discontinued the monotoring service. Can you tell me how to step by step to program from the keyboard to call my phone instead of the monitoring service ?

16:50 How do you auto program an RF smoke detector ?

Honeywell ademco 20p5y016 panel K4099 model

Fire alarm system connection please

Question.. I had a Vista 250BPT that was in my home and went bad. That system was overkill for my home anyway.. System was changed to a Vista 20P. The old system use to allow me to be able to set system even if a door was open and then leave the house and close the door (NOT A BYPASS) after the exit time elapsed that door would be in the ckt. Does the 20P offer this programming option? I cannot seem to locate the option in either the 250 or the 20p programming books. Thanks

Awesome video!

Thanks foy your great vídeo, i hope you could help me, my system has an 70 failure (an EA too), i already check the siren and its ok, when the alarm is active only sound an instant the siren sound after only keep the sound in the keyboard. (Keyboard only numeral) I appreciate your help and support.

Fantastic tutorial, this made programming my Vista20p so much easier. Thank You!

Hoping someone can help. My panel fell off the wall and the wires disconnected. Through trial and error, I think I have the wires reconnected correctly. From left to right, matching the order in the box: black, red, blue, yellow. This is the only wiring pattern that returns any type of response, which is just flashing red lights for Message and Alarm, and flashing green light for Ready. The keypad is unresponsive. Pressing the keys does not produce any beeps. The display screen is blank. I tried pressing and holding 1 and 3, but still no response beyond the continuously rapid-flashing lights. Thank you

Informative vid, programmed on of these last week, with a highly experienced installer, pretty intense for the first time. This vid helps quite a bit, thanks for the info.

Whats your paypal? I'm buying you a beer

How do I program a visual countdown displayed on the keypad? I don’t just want it to read you may exit now.

Great Video. Question, is there a way to turn off the beep sounds on a keypad? For example, if I want to leave the house early in the am and I press the keypad code to disarm the system, it will beep with each key that is pressed and this sound is heard on the other keypads (in the bedroom for example), which will will wake others up.

Really helpful, Thank you!

Really helpful, thank you!

Excellent guide! Thanks very much!