That’s not the abs sensor that’s known more like the speed sensor.

So Plan A Steal ..............................??? what the FFFFF

Hi ! Do you have the référence for the Brake caliper support ,

Lol, mine started doing this today but waay worse.

Hey @BackYardBuiltHondas love these videos! How did the bolt on core support turn out for the EM1? I'm working on an RSX right now that I'm probably gonna do this for..

Good morning, video very precise, useful, thank you. I own a 1999 Honda EJ9 Civic VI and I would like to do the conversion, but I don't know where to buy this kit because I'm in Italy. I wanted to ask where can I buy the kit and how high is the adapter plate from the base. Thank you.

*_Looking into this add well! Want to get a 3 point strut bar, but not sure if it will fit with the Y7 intake since it goes up and beds. Meanwhile the Y8 is just like flat. I'll try to attempt the install and if not I'll have to do the Y8 intake conversation 🥹_*

How do you get the fuel injector wires to reach?

Where can I buy those caliper bracket

you probably have figured it out by now, but i just did this swap and i was having the same kind of idling problem, idles high and when i give it throttle it would drop and start surging up and down. the problem was i had the MAP sensor and TPS sensor swapped around on accident, they look the exact same so it is an easy mistake to make for anyone having the same problem

How is it done

Hi I have a 1991 civic and had replaced my distributor now it’s not starting up? I didn’t look at the lining up on the distributor tooth. But it fits right in. Did I now damaged something? Or can I still take it out to try and lined up the tooth? Please help.

where do i get the platen for the conversation?

Is the spring supposed to move after you move the rings all the way down?

on my 1990 dodge OBD1.. you turn ignition key to accessory position 3 times...then leave in accessory position..and flash reading will start. thought id share that dont knoiw if relevant but it is OBD1

You have the wrong idea with electrical tape. Use when there is exposed bare wire. Not to keep a connector together. Use gorilla tape and/or zipties.

I have civic 97 dx coupe, i bought integra rear arms but i don't what rear line brakes i need to buy, the arms have the e brake cable already but my car is not abs

I have a similar tool on the same head. I got the first 2 and have tried every other one. I screwed the tightening bolt down all the way, and the keepers are still locked in? Whats the problem?

Hi where you find out that convertion I have a 2001 civic coupe

Can you post a parts list???? Definitely the bracket you used

Nice video! But where is the ABS ring and the sensor?🤔

Do you have a link or part number for that kit?

Yo where you at? About to start working on my EM1 again

This was 4 years ago. Any part 2?

Hey bro where did you get the parts from ?

So do I still block off the IAC valve, regardless of manual or auto?

Bet you engine shaking now 😆

Where did you get the brackets? I have a non ABS LX 98 sedan I'm gonna be converting. Thanks in advance :)

Where did you get the conversion plate?

can you please send me all the info IE part numbers so i can do the same thank you

So much for global warming I think now it's climate control I don't think they know what they're talking about

If that dummy can do it this dummy can!

Planing to bolt it on too.

How did you connect the iac valve from the y7 to thw y8 iac valve???

Thanks for the video. Straight forward with only one sensor to replace. I have a 1999 manual transmission 2 wheel drive. Have the same issue on ABS light is on. I'll replace that switch this weekend. You mentioned your speedomoter was not accurate, jumping around and getting stuck. Mine is simular, does not register speed intil I'm going 30 MPH or so. I"m not understanding the relatinship with the ABS sensor and the Speedo gauge. Is that where Ford takes the speed readings, not the wheel rotation? Question: did replacing the sensor "fix" you speedo issue too? ...and bro, be safe our there, please put on your seat belt. Want to see more videos, and keep you from injury. Cheers!!

Do you still own this car?

Very nice. Thanks for the write up. Helped me a lot with my conversion on my ek coup

Where is the parking brake?

I saw your last video. You don't know what a leakdown tester is, how to build one or how it operates. All you're doing is measuring the compressed air from your compressor. You could have done it without anything more than the hose from the spark plug to the compressor without any gauges.

Did you have to change out the trailer arms ?

I dont actually know why did u painted that mutch if that problem was only little bit ?

Clickbait

I think electron blue pearl is my favorite car color of all time.

Throttle position sensor. Clean the throttle body. That should stop the eractic movement of the needle.

How do you repair a rusting trunk lip or hatch lip?

Im kinda curious.. aren't the callipers and brake rotors the same from an acura integra... wont be eazy just to buy the brackets for the callipers and go get some cheap parts at the junk yard i mean imvesting 300 in stopping on a slow car .. dont feel like worth it that much

why dont you you just change the whole thing? arm with calipers, disk, cables etc, it works from dc2 to eg ek ej bolt on

They are picking on you

Somebody ruined that car. Like mods that people who own dodge neons did.