Yes it should! It’s a universal kit

Thank you! Figured I’d make a video since there’s practically none out there

This trail was in New Mexico! Using the All Trails app: Rio Puerco OHV LOOP. Requires this ground clearance. Get the 2” lift kit. Mines chewing through axles. I need to change it out to the 2”

@@bderkhanvlogs4715 thanks for replying I appreciate. My wife recently agreed on getting a lift kit installed. I’ll take care of it before our next road trip (so probably not before a few months). I’ll definitely plan going to that trail you showed in this video. If you have anything else like this to suggest, I’m all ears. Any other mods you recommend on that car ? (I’ll probably someday change the infotainment system and get one of these Chinese 10” tablets)

I want that infotainment system as well. Get the phone mount from Ali express that mounts behind the screen, it’s amazing. Also for that trip be very carful, there were a few close calls, be very careful going down some hills because they go straight down, so when you go up, MAKE SURE TO CHECK WHATS DOWN. The entrance to that place is the most difficult, otherwise there’s always another option to go around. Don’t risk it too hard.

It won’t really change HP unless you tune.

Thank you! Figured I’d make my own since none showed how to do it in every step

In this video I had stock tires. 235/65-18 But without trimming wheel wells people have fit 265/65-18 Basically, you can easily fit any tires from 235/55-18 all the way up to 265/65-18. So 255/65-18 is a nice size too

Thank you! That’s what I was going for. I was struggling to find a good video on how to take the tank off… decided to make one myself

Honestly, you can rent torque wrenches for free. But fr, don’t over tighten them. Just make them good. They’re pretty small bolts.

Only diesels typically have those

In the video I used the stock tires. I now have trimmed the wheel wells and fit: 265/70-18 Stock Tire Size: 235/65-18 Big tire size: 265/70-18

Thanks for watching Ashar! 2021 Highlander V6 has around 300HP. Highlanders are only available with Automatic Transmissions. The top speed might be below the average highlander now that I lifted the car by 3inches.

@@bderkhanvlogs4715 Thank you for telling me.

It is the 2021 Highlander XLE V6, I am sure it’s the standard AWD. I think the torque vectoring is available in the Limited

@@bderkhanvlogs4715 Thanks that sounds great. I'm like you and probably one of the few people that will test the off-road capabilities of this thing instead of crawling malls. Have a 22' V6 with the torque vectoring setup so all I got to do is catch up to you with getting the lift and then I'm leaving the pavement.

Made by Journeys OffRoad. Search google for: 4TH GEN TOYOTA HIGHLANDER 3" LIFT KIT

Yes you can! People do it a lot. Just make sure it’s direct injection otherwise there’s no reason to do it

Yes, they also need it because oil passes through the pcv to the intake and I have a 2019 camry v6 and a 2019 highlander xle v6 with the same engines and oil passes through the pcv and my camry I installed the catch can and I have collected oil that I try to enter the engine intake

Yes

Nice work! Glad I could help!

No it didn’t, it was just when it needed to warm up. However my tensioner wasn’t as bad, if your tensioner is really bad or if the belt is really bad then it could be the case

@@bderkhanvlogs4715 yeah it was my belt that was causing the noise. Thanks for the response and stay safe!

Hello, my friend says he notices more power but we won’t ever know since we didn’t dyno tune it. And I can’t say much about gas mileage because ever since getting this thing, my friend has just been dumping the throttle everytime.

@@bderkhanvlogs4715 it sounds very nice Good job 👏🏼 thanks

You’re welcome! Thanks for watching!

Welcome. Thanks for watching!

Greetings!

My lawn mower can probably gap what you drive :)