Madison Pro Audio

Пікірлер

@TL-wu4id 11 күн бұрын

👍👍👍👍👍 I love your video with the clear demonstration, unlike guys from Allen and Heath.

@jackdavies8317 13 күн бұрын

Is it possible to flash a DN32 card intended for an m32 and flash it in a Wing Compact so then I don't need to buy a new dante card for the Wing?

@communitystreams3579 3 күн бұрын

I would like to know this as well.

@jackdavies8317 3 күн бұрын

@ I found out on a forum page last week that it is possible, however it’s limited to 32 channels so wouldn’t be able to utilise the full capacity of the Wing.

@inocentonthetrack 28 күн бұрын

Is it possible to control a Yamaha Rio for example or a stage box in Dante?

@travishatch6246 Ай бұрын

how do you allow internal AoIP/Dante and DHCP IP Control for the computer Wing Edit software. Hopefully there are Console Options to control this

@Gregsound1 Ай бұрын

I just posted a video about this. You need to set the Dante card network switch options to “separated” in Dante controller.

@FVDaudio Ай бұрын

I came to think that an Ultranet Output could also be located directly in that internal expansion.

@dx9s Ай бұрын

AAAAhh... The (on power up) Utility -> Options -> "MOD-DANTE" is information I didn't know. I've only tested it via two devices (Dante virtual sound card) so far and seemed to be working, but under routing the module was darker and labeled "Module". It still worked in routing audio. But NOW those *looks* as expected. THANKS for that nugget! I suspect that is how you switch to other devices "MOD-WSG" for the Sound Grid card I am guessing. Again thanks.

@ARTWORKFOTO-DE Ай бұрын

do you need to flash it in the old mixer or can i flash any card inside the wing? i bought a card and don´t know which system in it was used before...

@Gregsound1 Ай бұрын

No you can can flash the card after you install it into the wing. It works either way.

@VladicD Ай бұрын

it is amazing how little stuff there is in this mixer.

@radioflyer2030 27 күн бұрын

Keeping the parts count low is how they manage to sell the product for such a reasonable price, considering it's abilities.

@christopherdunn317 10 күн бұрын

I was thinking the same thing ! but chips get faster, and cheaper, and need less components this is making this all possible

@tosinmacaulay Ай бұрын

Wow. I'm amazed

@jazbasoundandmedia786 Ай бұрын

Apple this also for WSG internal card ?

@CKARlife Ай бұрын

I have a 2007 GL450 and no brake controller wire and I did have the tow hitch from the factory

@dnashofficial 3 ай бұрын

great tutorial. thanks for mentioning the subgroups being mono by by choice due to constraints at the end. you may have mentioned it in the beginning, but i missed it. i spent much of the video asking myself why one would do that, but that's my ocd. i love my m32/superrack combo, and i totally find the limited number of aux busses very frustrating. it's great to see work arounds like this one being used.

@anthonydy6981 5 ай бұрын

Thank You!!👍🏻

@JQualitymusic 6 ай бұрын

I have a Midas m32. I don’t have a usb connection to my computer when I switch out the card for a adat. So how do I connect back to my computer?

@AdamSupremeWisdom 6 ай бұрын

No one speaks much about the USB 2.0 on the front of the mixer. Can you send audio to your computer through it?

@seangorman98 6 ай бұрын

Thanks, this video helped a lot. Installing a brake controller on my 2010 GL450

@jimiguitar100 9 ай бұрын

Thank you 😊

@pro_influence 10 ай бұрын

Thanks for tbis video, I I have learned about it now. ❤

@FrontCoverBand Жыл бұрын

Thanks for sharing!

@mptmtimwilliams Жыл бұрын

I have 2 Tascam mx2424 with adat cards and a M32 with adat card does anyone have a setup like this. I really need help with this.

@maldonadocorrea Жыл бұрын

Es el MXL revelation II? excelente video . Saludos desde Uruguay

@Shane-tr9ve Жыл бұрын

I wonder if that adapter would work on a 2008 GL 320 with the tow package.

@willowfearns4589 Жыл бұрын

Love getting taught sound things by Bill Haders voice

@andreialdea1657 Жыл бұрын

With this setup I see that the master from SuperRack is routed to outputs 15-16 from the back of the M32. Isn't there a way to route it to outputs 15-16 from the DL32? Because if i plug my mains to the DL outputs 15-16, the master from superrack doesn't work.

@danielgomez7696 Жыл бұрын

Inside of Routing it from Local just select your AES-50A

@TinoSchulz1990 2 жыл бұрын

Hey, just wondering: I'm looking for a solution to split all of our 32 channels. So i was thinking to get this adat card and connect them to those Behringer 8-channel adat devices. Would that even work? As a band we are self-contained with our x32Rack + DL32 for our in-ear setup, mostly going AES B to FOH for our M32. But sometimes we play at venues that only allow for analog splits (because they don't want to use the M32).

@larenceprix5384 2 жыл бұрын

I've followed the instructions here and got my groups routed through Superack, but I seem to have picked up a crackle somehow? I have toggled the rack on and off but it's there either way. I have an electronic kick drum playing through the group, and the crackle follows the beat of the drum although it isn't the sound of the signal clipping. Any ideas?

@larenceprix5384 2 жыл бұрын

firmware update sorted it

@colinpreston6149 2 жыл бұрын

These are sad days.... Digital mixers in my view should be used to cut down time so that you can mix easily and be more connected to the performance side of the job. I see more and more frustrated engineers now page swapping , checking to see if their configuration/routing are correct and not enjoying or connecting with the artist they're engineering for.. The M32 requires imho the most page swap per minute of any digital mixer out there.

@guilledezoq 2 жыл бұрын

Why would anyone have to keep checking for routing or changing pages? I do all my stuff while in the plane or bus, load while the band is loading in, place the mics where I want it, get my sounds and then mix on DCAs. As simple as it gets.

@rcandrade70 2 жыл бұрын

Can’t believe I’ve never heard this. Seriously awesome. I’ll be asking you to sing this for me xoxoxoxo

@AnilKumar-zo2eu 2 жыл бұрын

Thank you sir for your packaged information Sir please make video on AUTOMATIC MIC MIXING in QU32

@MyMagic95 2 жыл бұрын

Does ducking works with Yamaha L9s?

@JamesArthurHurley 3 жыл бұрын

Geez I hope the server or SuperRack never crashes. 😩 Great work around but this should be necessary on any digital console in 2022. WHY do these console makers have to make this so difficult. There are similar issues with not being able to properly ‘insert’ card ports directly on channels and busses at the insert point on Yamaha CL consoles as well. We are three generations into digital consoles and some of them still can’t get some of the basics correct. :-/.

@odettemakanjuola615 3 жыл бұрын

is there any way one can get these scenes and snapshots pls?

@femibrooks 3 жыл бұрын

Hello guys, anytime I record live with a 64G flash drive, there's always a glitch somewhere in the song. A lil part cuts off and jumps to another part of the song. I tried 3 different flash, same result?

@agrgnkc 3 жыл бұрын

Did that harness work fine once you hooked up your tow? I just got a 2009 GL450 and need to move my Tekonsha Voyager.

@Gregsound1 3 жыл бұрын

yes

@soundsgood7757 3 жыл бұрын

Great job. You've successfully navigated the convoluted patching of the X32/M32 and maximized your Waves usage.

@crisbaltazar9724 3 жыл бұрын

Trying this out the mains with L3 Multimaximizer and L2 Ultramaximizer is causing a lot of delay. How do you compensate for the latency?

@eduardojvivas 3 жыл бұрын

You just have to use a lower latency plug in. L2 / definitely L3 uses aloot of latency to process the audio

@matthewwillis7767 3 жыл бұрын

Watching this on repeat trying to wrap my mind around this tech wizardry

@miqueridotenosique 3 жыл бұрын

THE MODEL SUPPORTS HDMI LONG

@1983neng 3 жыл бұрын

Thanks for posting this informative video! Now looking forward to installing a brake controller on my GL rather than being intimidated.

@aaronfabian9410 3 жыл бұрын

What kind of stands are those

@cowboyscanskate4113 4 жыл бұрын

How do you set the gain on the mic pres?

@HcHsMarimbaphone 3 жыл бұрын

Did you ever figure this out?

@soundsgood7757 3 жыл бұрын

Before you take input from the Waves card you must set your preamps first. To do this go to Routing>Input and select the Local 1-8, 9-16, etc. (If you are not using a stagebox). If you are using a stagebox, select the channels from whichever AES A or AES B you are using. After your preamps are set switch the input to the card inputs. In this mode the Gain Control Knob wil control the digital trim instead of preamp. So it's important to set the preamps correctly from the beginning.

@4-11Sound 4 жыл бұрын

I've watched this 20 times and I can't get my head around it....the edit software patching blocks don't make sense in relation to the console in the new v4. I use Martix for L/R/Sub sends.... Will the matrix see the processed waves L/R or does it send it out of the xlr port before the matrix can pick up the processed signal? I have a waves setup coming next week, and will hopefully follow this more closely on the console.

@caleconrad2332 3 жыл бұрын

Matrices are fed FROM your LR+Sub, so if you are processing the LR send then you should hear it.

@jcabanaw 3 жыл бұрын

@@caleconrad2332 sadly this isnt the case in this setup. The processing isnt an insert.. its happening on the physical outs 15 and 16. So if you’re sending sub out Matrix 1. it is not getting processed by LR. I just tested this by filtering out everything below 200hz on my LR processing and the Sub was still loud and proud

@jourellbacani9793 4 жыл бұрын

hi quick question for some reason i had mains out process by superrack but no difference is happening or its not being processed im not sure what im doing wrong