00-06 CHEVY TOP INSTALL (PART 1 OF 2)

[@MrClownstastefunny]

This video is why I bought these covers, thanks guys.

[@TheSeatShop]

Thanks for the comment and glad we are glad we were able to help you out with your seats and install!

[@mcdonalddorothy4043]

Thank you! Thank you! Thank you! My husband watched your videos to install the bottom and top seat covers in his truck. Saved us soooo much money! He could not have done it without you! He has and continues to recommend you to everyone!

[@TheSeatShop]

Glad we were able to help y'all out

[@cfd184is13]

I watched the video and then purchased the cover (2005 Silverado 3500 HD). It went really well and I would not have done it without your excellent video. Great video and the seat cover is a very, very good quality. I did the drivers seat, the passenger seat is next.

[@TheSeatShop]

We appreciate the kind words and happy to hear our install videos helped. Whenever you're ready to move onto the passenger side, feel free to reach out! Thanks again and if you would like to share any before & after pictures, you can always send it to our email - [e-mail].

[@cadillachernandez2271]

You guys are the BEST. Thanks men!! 🇨🇦

[@briano3128]

Sweet, I couldn’t have done it without the vid.the plastic groove slides over the steel seat pan edge, took me a couple of tries to get that part😂

[@FrannyShadow]

This video helped immensely! Needed to get the top separated from the bottom and no one had a definite video on how to do it! Thanks!!! :)

[@TheSeatShop]

Happy to help!

[@mikeosborne5733]

Needed some perspective and you definitely gave that. Much appreciated

[@k9policexj]

Hey just wanted to say thanks for another great video. I use this one today when I was putting in the upper element for the seat heater. Now the driver's seat is like brand new and it's heated now

[@TheSeatShop]

glad we were able to help you out with this

[@akktiveautosports]

Thanks for all the helpful videos. Where is the video for the 95 tahoe top cover?

[@timdoyle3028]

Great video, very helpful. Both the bottom and back foams on both my front seats are seriously shot and need replacement. 2004 Sierra 1500 OEM seats are 12 way power with heat and pewter leather. I found and recently purchased a set of 2004 Silverado pewter cloth seats that are in virtually new condition. The bottoms should just transfer over as bolt ins except I have to peel the fabric off to move the heating element, but what about the back foam? How does that come off the frame? Any tips? Thanks.

[@murphster737]

How do you take off the armrest?

[@Tbolt1000TForLife]

I'd like to see a top cover instal video and(If possible) a back seat cover install video(top, bottom, headrest, armrest) for a 1995-99 Tahoe and Suburban.

[@akktiveautosports]

Why isn't there one?

[@dozaljose]

Can the top cover be swapped without removing the seat completlely? I did the bottom already. Thanks.

[@francesguerrero3279]

Mine has the cloth seat and I looked on y'alls website and y'all only have leather vinyl option. will the cushion still work with my seat?

[@mauroaparicio1855]

very good video

[@normhaidet8319]

What do you call the long tool I've seen used??

[@vap3modz172]

How do you replace and buy the top foam not just

[@pjtruesdale16]

Is the process for a 96-99 similar to this ?

[@lukeduke1573]

Do you make seat covers for a 2000 tahoe that does not have armrests?

[@toddumaine1794]

Thanks great help. Do you sell the arm rest clip and rubber band? I bet you know where mind are. LOL

[@TheSeatShop]

no worries, you can try this little trick and it will be as good as new - kzbin.info/www/bejne/mKvUimZ7oJVmgsU

[@saliqelamin7953]

where can i get the back foam from i cannot find

[@scooper6306]

i would like to see how to recover the front seats top and bottom on a 2011 chevy silverado crew cab

[@sanchez664tj7]

Any video on how to replace seatbelt ?

[@TheSeatShop]

While we're not going to have a video on replacing the seatbelt, you can always give us a call at 214-710-2565 and ask for our R&D team, they should be able to help.

[@jmjacobson101]

What would I order if my seats do not have an armrest? I have a 2003 Sierra 1500. It does have the full center console.

[@TheSeatShop]

Hey Harry, feel free to DM us your VIN # and a picture of your seats to [e-mail]. We would be happy to help you out.

[@jmjacobson101]

@@TheSeatShop I'll send you pics. My VIN # won't help. It started out as a 2003 work truck. The previous owner installed a full center console from a 2000 Sierra 1500 but I am installing a 2005 Tahoe center console. I believe it originally had the fold down center console but was removed.

[@snakeplisken4287]

Do you sell the back cushion

[@evo6swap]

Do you the top foam part pl for a 2003 chevy avalanche

[@TheSeatShop]

We do not currently manufacture that part. Sorry about that!

[@evo6swap]

do you know who may sale it pl @@TheSeatShop

[@adrenalinehigh2070]

I couldn't help but notice how the top of the seatbelt wasn't loosened up from the seat by you at all, and as you took the seat cover off, it lifted off from the seat a good 3 inches. AREYOU KIDDING ME???? The seat cover is what hold it in place???? damn! no wonder Tahoe and Suburban owners get injured so badly when they hit another SUV. That can't possibly hold the average 300lb American. OUCH!!!

[@CadillacCherryBlack]

Do you make covers for 2006 H2 Hummer

[@TheSeatShop]

Unfortunately, not at this point in time but we may look into it in the future.

[@corpsegrinderak]

Can I put the 03 covers on an 01 frame if I change the foam and can I get both from you giys

[@TheSeatShop]

So while technically yes, that would work, the cover measurements are not the same length and there's a small part of a metal bar that would stick out by the control panel. If you would like, we could always double-check that for you! You can take a picture of your seat covers, as well as provide a VIN # and email that information to [e-mail]. We can assist you further from there!

[@christopherrivas4403]

Hey guys, my driver seat (03 Tahoe) leans back towards the right. Like the support is gone. Do I need new foam structure? Wondering if I should just buy a new seat

[@TheSeatShop]

Hi Christopher, thanks for reaching out, honestly we would have to see your seats to know exactly why it's leaning that way. You can contact us at 214-710-2565 so that we can better help you out please have a picture of your VIN# and a picture of your seats ready so that we can better help you out

[@ginjiguts]

Can you replace the foam?

[@TheSeatShop]

Thanks for the comment, usually the top foam does not need to be replaced since most of the stress goes to the driver bottom foam. If there is a section that is missing what you can do instead is add a block of foam to that section with some spray adhesive to fill that section up again. Here is a link to what we offer for this Year Make and Model - www.theseatshop.com/2004-chevrolet-suburban-ls-or-lt/#?valueIds=8261,8276&groupIds=3,7042&seatRowId=6&seatPositionId=9

[@jonathandeleon5588]

Maybe you should’ve just added how to take off the arm rest in the video also instead of making a separate video of it?

[@perrycooper7279]

I have a 1999 LT Chevrolet suburban

[@elmaliboo4124]

And

[@dbell41888]

I have a 02 gmc dually

[@mikemichael9117]

flip flops? For your safety, please go put some shoes on. And thanks for making these vids

[@richardbartlett6358]

mine was not shipped inside out

[@TheSeatShop]

Hi Richard thanks for the comment, just curious what did you order and what was not shipped?

[@PeterEss]

Do you absolutely have to remove the bottom part of the seat?

[@TheSeatShop]

Hi and thanks for the comment, some people try to work with their seats in the vehicle and immediately regret it. The main reason is that you have to know where you are clipping the covers to which is underneath the seat frame and usually a couple things happen: 1. the covers rip since they are being tugged in a way they should not be tugged. 2. You will clip into the wrong spot and your install will not look as great 3. You might damage a power cord or cut your hand with the frame. 4. It will probably save you at least an hour of work since you will struggle in getting to the right spots (door, steering wheel, center seat or console in the way). But you can still try and do the install with the seats in the vehicle we would just not recommend it.

[@PeterEss]

TheSeatShop thanks for the response! With the seat out of the vehicle, can I just roll up the seat back cover to get a new heating element in or do I need to remove the bottom foam etc ?

[@TheSeatShop]

@@PeterEss it will depend on the top or bottom seat section, for the top you can unroll the top to remove the heating element. For the bottom, you will need to remove the cover. But the easiest item to remove is the bottom foam since it just sits on the frame, how it works is the cover velcros onto the foam and then wraps around the foam and clips to the frame underneath the seat. This video should explain the process if need be you can just fast forward or jump around the video.

[@PeterEss]

TheSeatShop yup makes sense. I already did the bottom and realized the top is also faulty. Trying to avoid removing the bottom again 😄

[@freezingthedarkness]

Nice job guys, but, honestly, you work kinda messy...06:11

[@somerandomguy6322]

For the love of God. Just cut it off.

[@TheSeatShop]

Yes, you can do that. For our purposes, we retain many of these covers for test fit and comparison, so we show the entire process. You can definitely cut the cover and skip the removal process in the video if you'd like.

[@eddavis2681]

Fixin to order top and bottom for 2004 Silverado 3500. Is there a video removing the top? Want to see how y’all handle the arm rest clip etc. Thanks, Great videos….

[@TheSeatShop]

@@eddavis2681 we have a 2 part video series for this vehicle. You can find part one here: kzbin.info/www/bejne/rpLXhpdtYs-rmac

[@Austinthecarter17]

Can you remove the seat belt retractor on these model years of seats?

[@karlus3684]

You can, but getting that bolt out is hard (breaker bar). You will need to 100% clean the threads from that blue loctite or you will bend the bracket trying to get it to go back in. It's a lot of work.