00778 - Steering Angle Sensor (G85) / Датчик угла поворота рулевого колеса Audi A6 C6 Fix with VCDS

[@Sanek163RUS]

Спасибо тебе,добрый человек👍👍👍

[@Alex-xv6kf]

Мужик! Огромное тебе спасибо! У меня все получилось! Если бы не это видео, у меня уже руки опустились...

[@ZDarjus]

Пожалуйста

[@suhejbqazimi6991]

Man you have saved me! I accidentally wanted to code the abs module but wrote it wrong and i did not take a photo. Searching and searching i watched your video and tried your software code and guess what? it worked!!! thank you very much

[@ZDarjus]

Suhejb Qazimi you are welcome :)

[@halluk1]

Thx mate, a big help for me and nice music as well.

[@vitalik3273]

Дякую, Вам. Гарна робота.

[@IvanValbuena-p7t]

Muchísimas gracias por tu vídeo, muy bien explicado y simple de realizar en el coche. Ya no tengo el fallo. Gracias de nuevo.

[@stefanczechorskidds8435]

Greetings from the USA! Thank you for the video, very helpful!

[@pal.thecarmechanic]

Great work . Very clear information . Thanks for this 👍🙏

[@ZDarjus]

you are welcome :)

[@martinainguis1]

Fantastic video but please next time don’t put any music it’s best to keep silent then this noise Once again thanks

[@dennisjohansdon7821]

TOP video BEST on KZbin BIG THANKS :)

[@gerardoaceves3753]

What if i centerd the steering wheel but it is not 0° on vagcom? thas my problem...

[@nainka11]

Thanks............and Well done

[@mokhan8255]

Hi i have a audi a3 2010 the steering rack was replaced and then the yello steering light is on the dash board and the abs light. Will this work. Mabey the steering angle snesor is out. Any help would be good i have the vcds machine. Thanks

[@ZDarjus]

First you should check for Fault Codes and if Fault Codes same as mine then yes this will work

[@mokhan8255]

Hi thanks for reply. It worked lights gone off thanks for the help.

[@EnjoyLaudrup]

Hi, it didn't work for me unfortunately. I did everything the same, only that in "Basic settings -04" in the drop-down menu I did not see "Steering Angle sensor G85 alignememt" but "Adjustement of ESP -Sensor Unit (G419). And when I follow all the steps, the error continues. 😔. Thank you

[@Reptylee79]

Thank you. It's worked perfect for me 👍

[@benjaminben7045]

Thank you bro !!! You save my life !!!

[@guiredivo]

Post

[@thecgg6172]

Is the security code the same for Audi A3 8p

[@tadasbagociunas3318]

Fantastic, thank you so much

[@MrPhilipp4u]

Thank you very much!

[@vlds5560]

Will this work for audi a4 b8 with same problem ESP off when turning?

[@ZDarjus]

Yes shure

[@32moreman]

Больше спасибо, помогло

[@ZDarjus]

andrei marin pazalusta

[@987HOSSEIN]

Hii question i have audi b7 a4 does this work with the lite version?

[@ZDarjus]

Hi cant say because dont have lite version if you have try if this version have same functions

[@Pedro-Picotti]

Please help me , my audi a4 B8 2011 was replaced steering box there i turned on this step light vcds dir has to calibrate the steering angle but it does not work already tried everything and it is also licked system function test

[@ZDarjus]

If you replaced all stearing box it not help you need adaptation first it can be done with other program like FVDI Abrites or Audi dealer

[@choiyohan]

Thank you😮 work in🎉

[@shaagealgareb9189]

very very good...than; you

[@СергейПросяной-м7ъ]

Спасибо , получилось!!!

[@anthonyeast7248]

So I got to hook my scanner to a laptop for this?

[@gilgner]

Would this work on a 2009 A4 Avant? B8/8.5

[@ZDarjus]

Hi yes sure but if same fault code

[@tdyvipera]

Mnezo sa iti dea sanatate ca numa nu am reusit. 👍😂

[@romanrepin3115]

Hi, when I'm trying to access ABS module with code 40168 I see an error "Access Denied", then I tried to find and enter other codes, and anyway I see another error "37 Required time didn't pass" Abs module MK60EC1. Any solutions or ideas?

[@ZDarjus]

Hi maybe vcds cable main chip do not support because china copy i knew have 2 or 3 different main chips, and some cable do not suport all blocks to open

[@frishhem]

Hallo, thank you for the video ...

[@anthonyeast7248]

I got you thanks for this video

[@razvanionut4363]

when I get to the step with reading the sensor g85 at degrees it shows me 0 in any position is it because of the sensor not reading

[@ZDarjus]

Razvan Ionut yes probably flex sensor broken faulty

[@miricaalexandru5432]

Cum ai rezolvat problema?și la mine e la fel

[@tomaszz4205]

Dziękuje. Gracias. Thank you

[@ZDarjus]

Tomasz Żuk Prosze :)

[@youbiker]

very good tutorial tnx :D

[@ZDarjus]

you are welcome :)

[@massegaming9886]

Nice 👍👍👍👍👍👍

[@SashaNeGoni]

вопрос. С Audi a3 пройдёт это? точно такая же ошибка с таким же номером.

[@ZDarjus]

Alexandro juk должно пройти таким же способам

[@dailiusabezgaus7673]

HELPPPPP !!!!!! Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi a6 c6. Anyone?

[@ZDarjus]

Dailius Abezgaus you steering wheel flex cable maybe broken

[@powerads5300]

Thank you

[@FunnyVidz786]

will this work on Audi a5

[@ZDarjus]

Yes it will work on Audi A5

[@nondalelolone4508]

Hello guys, anyone can help me, my car showed code 00778 after replacing clock slip squib ring and stating that steering angle sensor defective and no or incorrect basic setting/ adaptation? and showed yellow steering light.

[@ZDarjus]

Nondalelo Lone try to drive 50m and turn wheel to left after that turn wheel right and then try, maybe faulty angle sensor replaced if used

[@ZDarjus]

Nondalelo Lone or maybe you do not correctly set angle sensor

[@도깨비옛날사람]

소중한 정보에 감사드립니다.

[@ZDarjus]

Glad to help you :)

[@12redwhite]

Why did the steering angle go bad?

[@ZDarjus]

Enzo herrera because i removed all steering wheel to resolder releys for ignition where problem is but in this case master who removed steerring wheel turn wheel too much in one side and broke steering angle

[@robsonjustinorodrigues7411]

Top... ajudou mt

[@borjamartin4242]

💪👏

[@nondalelolone4508]

Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi A3 2006 model

[@Borosescu]

I have exactly same issue. Can someone who knows tell us what to do?

[@miricaalexandru5432]

PLS help me, i do what you do and now my steering wheel îs very hard

[@ZDarjus]

its not possible carefully check video and make one more time

[@miricaalexandru5432]

@@ZDarjus i do 7 times, ITS posibile to mess something up? To destroy something when i do this steps? I Forgot to mention i have ESP light on and i think 1 ESP rear right bad

[@ZDarjus]

@@miricaalexandru5432 If you make diagnostic and have same fault codes it should help, if you see ESP light only and make this you don't know what you are doing. Because i think you don't know what is ESP

[@miricaalexandru5432]

@@ZDarjus no, i have same fault +esp light on

[@ZDarjus]

@@miricaalexandru5432 what do you mean 1 ESP rear right bad ?

[@ManuTek77]

👌👍

[@Egorka1643]

Спасибо за информацию 💪💪💪

[@vitalkozub2401]

Super 🎉🙏🤝